水产饲料膨化机设计刍论     

徐钟良  陈启发 《台湾海峡》2001,20(Z1):207-211

据开发应用水产饲料膨化机实践，初步论述了膨化机生产能力与动力匹配，螺杆设计参数长径比，物料在腔内滞留时间，膨化腔设计及其温度调控，并提出改进设计的见解.  相似文献   

The effect of temperature on growth of Atlantic cod (Gadus morhua L.)     

Brander  K. M. 《ICES Journal of Marine Science》1995,52(1):1-10

  相似文献   

影响萼花臂尾轮虫种群增长的生态学因子的研究：温度和饵料密度的影响   总被引：11，自引：0，他引：11  

王金秋 《海洋湖沼通报》1995,(4):21-27

本文研究了在5个温度梯度和4个饵料密度的20个试验组合下，萼化臂尾轮虫（Brachionuscalyciflorus）的种群增长规律。结果表明，该轮虫实验种群的最适温度范围是28—32℃，临界高温是36－40℃；最适饵料密度是45－65×106个／ml。这两个生态因子的最佳组合是温度32℃，饵料密度为65×106个／ml，此时，种群达最大密度3．4×103个／ml。  相似文献   

牙鲆鱼耗氧率、氮排泄率与体重及温度的关系   总被引：2，自引：0，他引：2  

张兆琪  张美昭  李吉清  郑春波 《中国海洋大学学报(自然科学版)》1997,(4)

对个体重２．５～３４．５ｇ的牙鲆幼鱼在不同水温（１２、１７、２２、２７℃）下的耗氧率和氮排泄率进行了测试和分析。结果表明，牙鲆幼鱼的耗氧率和氮排泄率均随体重的增加而增加，其差异均达到极显著水平（Ｐ＜０．０１）；牙鲆幼鱼的耗氧率随水温上升而增加，但仅２７℃组与其他３个温度梯度组分别比较，出现差异极其显著（Ｐ＜０．０１），后３个温度梯度组之间的差异则不显著（Ｐ＞０．０５）；牙鲆幼鱼的氮排泄率也随温度的提高而增加，其差异亦达到极显著水平（Ｐ＜０．０１）。作者认为，在牙鲆养殖生产过程中，养殖水体溶解氧应维持在３ｍｇ／Ｌ以上，养殖水温以不超过２７℃为宜。  相似文献   

龙口平均海平面变化原因的研究     

毕立海  唐丽美 《海洋预报》1996,13(4):52-55

本文通过对实测海平面高度的对比，发现龙口平均海平面从１９９１年起有明显的升高趋势。作者猜测此乃龙口在码头扩建后有系统下沉所致。  相似文献   

海带几个不同种的雌性克隆对高温的适应力     

王梅林 《中国海洋大学学报(自然科学版)》1987,(2)

每几个不同种的雌性克隆对高温(22℃、24℃、26℃)的适应力有所差异。大西洋沿岸的Laminariahyperhoren和L.sacchrina雌性克隆较太平洋沿岸的L.japonica、L.angustata和L.ochotensis雌性克隆明显地不耐高温,遗传性的不同是造成这种差异的主要原因。这种遗传性差异是海带长期自然选择的结果。同一物种L.japonica和L.japonicaCⅡ两种雌性克隆在24℃条件下,在第24天其死亡率分别是40.2％和25.2％,X~2=12.25,P<0.001,差异是高度显著的,说明这种不同是遗传性不同所致,而且属于物种内部的差异。  相似文献   

海洋岛海域水温异常波动与养殖栉孔扇贝死亡的关系   总被引：2，自引：0，他引：2  

周玮  薛真福  王有君  贺先钦  林祥辉  王庆成  刘兴盛  孙景伟 《海洋湖沼通报》1992,(4)

本文对海洋岛海域水温异常波动,与该海域养殖栉孔扇贝大批死亡的关系,进行了研究。首先,总结了几年来海洋岛海域养殖栉孔扇贝死亡的特征。其次,结合水温观测数据分析了水温异常波动与栉孔扇贝大批死亡的关系。得出的结论是:大幅度、跳跃型水温异常波动是导致扇贝死亡主要原因。最后,通过生物试验证实了上述观点。  相似文献   

千里岩的气温变化特征及其与西北太平洋副热带高压的关系     

贾瑞丽  郭可彩 《海洋预报》1997,14(4):67-72

本文根据１９６０～１９９４年千里岩和青岛月平均气温资料，分析了千里岩与青岛３５年来气温的年、季变化特征及差别，发现３５年来，千里岩和青岛的年、季平均气温均呈变暖趋势，但千里岩增温幅度较青岛小。从分析中发现，与气温变暖趋势相对应，西北太平洋副热带高压（以下简称副高）面积、强度指数的年、季变化也呈明显的增强、增大趋势。且年平均气温与冬季副高面积指数相关最显著。最后依此关系建立回归方程，并预测了１９９６年千里岩年平均气温的变化趋势。  相似文献   

A New Methodology for Incorporating Tide Gauge Data in Sea Surface Topography Models   总被引：1，自引：0，他引：1  

J. C. Iliffe  M. K. Ziebart  J. F. Turner 《Marine Geodesy》2007,30(4):271-296

As part of the Vertical Offshore Reference Frames (VORF) project sponsored by the U. K. Hydrographic Office, a new model for Sea Surface Topography (SST) around the British Isles has been developed. For offshore areas (greater than 30 km from the coast), this model is largely derived from satellite altimetry. However, its accuracy and level of detail have been enhanced in coastal areas by the inclusion of not only the 60 PSMSL tide gauges with long-term records around the coasts of the United Kingdom and Ireland but also some 385 gauges established at different epochs and for different observation spans by the U. K. Admiralty. All tide gauge data were brought into a common reference frame by a combination of datum models and direct GPS observations, but a more significant challenge was to bring all short-term sea level observations to an unbiased value at a common epoch. This was achieved through developing a spatial-temporal correlation model for the variations in mean sea level around the British Isles, which in turn meant that gauges with long-term observation spans could be used as control points to improve the accuracy of Admiralty gauges. It is demonstrated that the latter can contribute point observations of mean sea level (MSL) with a precision of 0.078 m. A combination of least squares collocation and interpolation was developed to merge the coastal point and offshore gridded data sets, with particular algorithms having to be developed for different configurations of coastal topology. The resulting model of sea surface topography is shown to present a smooth transition from inshore coastal areas to offshore zones. Further benefits of the techniques developed include an enhanced methodology for detecting datum discontinuities at permanent tide gauges.  相似文献   

A New Fall-Rate Equation for T-5 Expendable Bathythermograph (XBT) by TSK     

Kizu  Shoichi  Yoritaka  Hiroyuki  Hanawa  Kimio 《Journal of Oceanography》2005,61(1):115-121

The accuracy of the manufacturer’s fall-rate equation for the T-5 Model of expendable bathythermograph (XBT) has been investigated based on about 300 collocated pairs of XBT-CTD (Conductivity-Temperature-Depth profiler) measurements in various climatological regions. We found that the equation systematically overestimates depth by about 5% for the T-5 produced by Tsurumi Seiki, Co. Ltd. (TSK), but almost no bias is associated with the T-5 produced by Sippican, Inc., in USA. The cause of this difference is not clear, because the two manufacturers’ T-5 probes are reported to have identical shape and weight in water. We propose a new fall-rate equation for the TSK T-5: z(t) = 6.54071t - 0.0018691t ², where z(t) is depth in meters at time, t, in seconds.  相似文献