烧伤病人应用CHIMEHERB人工皮的临床评价     

唐晓熹  许伟石 《中国海洋大学学报(自然科学版)》1989,(Z3)

本研究初步评价CHIMEHERB人工皮的治疗效果.74例,105个创面应用人工皮:供皮区47个创面,愈合时间平均为9±1.94d(天),油纱布对照为11.7±1.93d(P<0.01);14个浅Ⅱ°新鲜创面,70％在3～5d内逐渐干燥与创面紧密粘附,平均愈合时间为9.8±3.09d;11个存留上皮组织的削痂深Ⅱ°创面,平均5.7±1.7d干燥,平均愈合时间为10.55±3.09d,不需植自体皮;8个削痂刨面至脂肪组织或切痂创面4～9d更植自体皮,其存活率近乎100％,2个创面因残留坏死组织而失败;人工皮应用于16个自体皮间隙创面,除三个网状植皮和一个条状植皮创面失败外,所植自体皮都在人工皮下扩展融合,未观察到占位现象;对后期残余小创面有良好的效果.本研究结果提示人工皮对创面愈合具有有利影响.主要适用于供皮区、浅Ⅱ°新鲜创面、深Ⅱ°脱痂和削痂后存留上皮组织较多的创面、自体皮间隙创面和后期残余小创面,不适宜于深Ⅲ°新鲜创面.  相似文献   

人工神经网络在地质学判别分析中的应用     

孙效功  王硕儒 《中国海洋大学学报(自然科学版)》1994,(2)

将现代人工神经网络方法应用于地质学的判别分析，通过实例计算表明，无论是对于两组判别分析还是多组判别分析，人工神经网络方法都是切实可行的。  相似文献   

Spring-spawning herring (Clupea harengus L.) in the southwestern Baltic Sea: do they form genetically distinct spawning waves?     

Hede Jorgensen  Hanne B.; Hansen  Michael Moller; Loeschcke  Volker 《ICES Journal of Marine Science》2005,62(6):1065-1075

  相似文献   

Distribution of nonlinear wave crests     

J. Al-Humoud  M. A. Tayfun  H. Askar 《Ocean Engineering》2002,29(15):1929-1943

The distribution of nonlinear wave crests is examined on the basis of a theoretical probability density previously given elsewhere (J. Eng. Mech. 120 (1994) 1009). Certain errors contained in the original theoretical density are corrected, and the corresponding exceedance distribution is derived. The resulting theoretical forms of the probability density and exceedance distribution are then slightly simplified and compared with nonlinear wave data gathered under hurricane conditions. The results indicate that the proposed theoretical forms describe the observed distributions of large wave crests better than the Rayleigh law. However, the quantitative accuracy of the predictions is somewhat poor, as is typical of approximate theories based on Gram–Charlier-type expansions.  相似文献   

Long Waves Associated with Bichromatic Waves   总被引：1，自引：0，他引：1  

DONG Guohai 《中国海洋工程》2001,(2):281-289

A numerical model of low frequency waves is presented. The model is based on that of Roelvink (1993), but the nu-merical techniques used in the solution are based on the so-called Weighted-Average Flux (WAF) method with Time-Operator-Splitting (TOS) used for the treatment of the source terms. This method allows a small number of computational points to be used, and is particularly efficient in modeling wave setup. The short wave (or primary wave) energy equation is solved with a traditional Lax-Wendroff technique. A nonlinear wave theory is introduced. The model described in this paper is found to be satisfactory in modeling low frequency waves associated with incident bichromalic waves.  相似文献   

Separation of Waves by Interpolation Method     

孙鹤泉  王永学 《中国海洋工程》2003,17(1)

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｏｍｅａｓｕｒｅｔｈｅｒｅｆｌｅｃｔｉｏｎｏｆｉｎｃｉｄｅｎｔｗａｖｅｓｐｒｏｄｕｃｅｄｂｙａｐｈｙｓｉｃａｌｍｏｄｅｌｉｎａｗａｖｅｆｌｕｍｅｉｓａｃｏｍｍｏｎｐｒｏｂｌｅｍｗｉｔｈｐｈｙｓｉｃａｌｔｅｓｔｓｏｆｗａｖｅａｃｔｉｏｎｏｎｃｏａｓｔａｌｓｔｒｕｃｔｕｒｅｓ .Ｗａｖｅｓｇｅｎｅｒａｔｅｄｂｙｔｈｅｗａｖｅ ｍａｋｅｒｐｒｏｐａｇａｔｅｆｏｒｗａｒｄｉｎｔｈｅｗａｖｅｆｌｕｍｅａｎｄａｒｅｒｅｆｌｅｃｔｅｄｂｙｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌ,ａｎｄｔｈｅ…  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

Statistics of nonlinear wave crests and groups   总被引：1，自引：0，他引：1  

M. Aziz Tayfun   《Ocean Engineering》2006,33(11-12):1589-1622

Groups of large nonlinear waves with sharper higher crests can pose hazards to ships, induce harbor resonance and cause wave-overtopping of fixed and floating structures. Past interest in wave groups has mostly been focused on the statistics and modeling of linear wave groups. Studies on nonlinear wave groups are surprisingly few, and address deep water waves only. Here, statistics of nonlinear wave crests and wave-crest groups in deep and transitional water depths are considered, using an appropriate second-order representation for crest heights and the continuous wave-envelope approach. In particular, theoretical expressions describing the statistics of nonlinear wave crests and their groups are posed in the form of a simple second-order transformation of well-known results on linear waves. Predictions from the transformation so posed compare well with nonlinear wave data gathered in the North Sea, and demonstrate that nonlinearities do affect the statistics of large wave crests and their groups significantly.  相似文献   

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan     

Martin Gutowski  Monika Breitzke  Volkhard Spieß 《Marine Geophysical Researches》2002,23(1):57-75

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.  相似文献   

Three-dimensional numerical simulation of obfique wave action on vertical walls     

LI Benxia YU Xiping YU Yuxiu 《海洋学报(英文版)》2006,25(1):147-153

A three-dimensional numerical model based on the potential theory was developed to study the oblique wave action on vertical walls. A source term inside the domain was used to generate incident waves and outgoing waves were dissipated by sponge layers and transmitted by radiation boundaries. The finite difference method was used to solve the governing equations and boundary conditions in the regular transformed domain in σ-coordinate. Satisfactory agreements between the numerical predictions and experimental results of wave force were obtained. It is concluded that the maximum wave force acting on the vertical walls is induced by the obliquely incident waves rather than the normally incident waves.  相似文献