压力传感器的自动标定技术     

王莉娜  赵先龙  阮锐  严晓明 《海洋测绘》2007,27(4):78-80

针对压力测量设备生产和维护过程中,对关键部件压力传感器标定处于手工操作状态、效率低、操作人员不易掌控、标定结果处置复杂的现状,开发了针对压力传感器的自动标定技术。该技术将计算机控制、智能化、曲线拟合和误差分析引入到压力传感器的标定过程中,大幅度提高了标定的效率和可靠性。经此技术标定过的压力探头,在使用中具有互换性,减轻了数据后处理工作的难度。  相似文献   

装载GPCTD传感器的海翼水下滑翔机观测数据实时质量控制     

刘增宏  许建平  俞建成 《海洋学报(英文版)》2020,39(3):130-140

Profiles observed by Sea-Wing underwater gliders are widely applied in scientific research. However, the quality control(QC) of these data has received little attention. The mismatch between the temperature probe and conductivity cell response times generates erroneous salinities, especially across a strong thermocline. A sensor drift may occur owing to biofouling and biocide leakage into the conductivity cell when a glider has operated for several months. It is therefore critical to design a mature real-time QC procedure and develop a toolbox for the QC of Sea-Wing glider data. On the basis of temperature and salinity profiles observed by several Sea-Wing gliders each installed with a Sea-Bird Glider Payload CTD sensor, a real-time QC method including a thermal lag correction, Argo-equivalent real-time QC tests, and a simple post-processing procedure is proposed. The method can also be adopted for Petrel gliders.  相似文献   

Application of Microbial BOD Sensors in Marine Monitoring     

张悦  王建龙  李花子  施汉昌  竺建荣 《海洋通报(英文版)》2001,3(1)

A strain of yeast, which can endure high osmotic pressure, is employed for the sensitive material of the microbial BOD sensor. Two immobilization methods are used, I.e. Calcium alginate gel be ads and PV A gel beads. The results show that the PVA gel beads is better. The influences of osmosis and heavy metal ions on the yeast entrapped in the PVA gel beads are also studied in the experiment.  相似文献   

船舶机舱自动集中监测报警系统结构与功能分析   总被引：1，自引：0，他引：1  

张峰 《海岸工程》2001,20(2):52-56

船舶机舱集中监测与报警系统目前已在船舶设计制造中得以广泛应用。对其组成、工作流程及功能进行了较为系统的阐述 ,为船舶使用者提供借鉴  相似文献   

Long-term Sensor Drift Found in Recovered Argo Profiling Floats   总被引：5，自引：0，他引：5  

Eitarou?OkaEmail author 《Journal of Oceanography》2005,61(4):775-781

We recovered three Argo profiling floats after 2 to 2.5 years of operation, and recalibrated their temperature, conductivity, and pressure sensors. The results demonstrate that these floats exhibited a significant drift in salinity of −0.0074 to −0.0125, primarily due to the conductivity sensor drift. Combined with the recalibration result for another previously recovered float, the indication is that the negative salinity drift increases nearly in proportion to the operating period of floats. The increasing rate is −0.0041 (±0.0015) year⁻¹, which yields a salinity drift of −0.016 (±0.006) for the expected float lifetime of four years. The present result suggests that reducing the float surfacing time would improve the accuracy of the salinity measurements.  相似文献   

高精度CTD剖面仪电导率传感器的研究和实验   总被引：3，自引：2，他引：3  

李红志  王云泉 《海洋技术学报》2001,20(1):147-153

高精度CTD剖面仪是海洋863项目的重要组成部分，是海洋调查和水文观测必不可少的仪器，本文详细论述了CTD剖面仪中电导率传感器的研制方法和过程，并给出传感器现已达到的水平，提出还需要进一步进行的工作和深入研究的问题。  相似文献   

Use of an optical oxygen sensor to measure dissolved oxygen in seawater     

Hiroshi Hasumoto  Tsuneo Imazu  Toshiaki Miura  Kazuhiro Kogure 《Journal of Oceanography》2006,62(1):99-103

The use of an optical oxygen sensor to measure dissolved oxygen in seawater was investigated. The sensor is based on the dynamic quenching of an oxygen-sensitive fluorochrome embedded in the tip. Dissolved oxygen in seawater samples collected from eight stations at depths ranging from 3000 to 6000 m was analyzed both with the optical sensor and by the Winkler titration method. The two sets of data did not differ significantly. The stability and simplicity of the method and the good agreement of the results with those of the titration method indicate that the sensor would be useful for fieldwork.  相似文献   

Stability of Temperature and Conductivity Sensors of Argo Profiling Floats   总被引：7，自引：3，他引：7  

Eitarou Oka  Kentaro Ando 《Journal of Oceanography》2004,60(2):253-258

After recalibration of the temperature and conductivity sensors of three Argo profiling floats recovered after operations for four to nine months, the results indicate that the floats basically showed no significant drift, either in temperature or salinity, and adequately fulfilled the accuracy requirement of the Argo project (0.005°C for temperature and 0.01 psu for salinity). Only the third float showed a significant offset in salinity of about −0.02 psu, as expected from comparison between the float data and the shipboard conductivity-temperature-depth data. This offset was caused by the operational error of the PROVOR-type float, in which the surface water was pumped immediately after the launch, fouling the conductivity sensor cell. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Comparing the modelled and measured target-strength variability of walleye pollock, Theragra chalcogramma     

Hazen  Elliott L.; Horne  John K. 《ICES Journal of Marine Science》2004,61(3):363-377

  相似文献   

具有国际先进水平的CTD定标检测设备   总被引：1，自引：0，他引：1  

于厚隆  贾肇基 《海洋技术学报》2001,20(1):124-129

在国家863计划的支持下，海洋技术研究成功研制了一套CTD仪器的校准设备，本文介绍了设备的组成，性能，设计经过与SBE设备进行了比较，表明该设备达到了EOCECTD设备的校准要求，同时，该设备是海洋技术研究所开发自有的高度CTD剖面仪的有力工具。  相似文献