Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines     

Jinzhong Dou  Zhong-Jie Zhang 《Marine Georesources & Geotechnology》2021,39(1):15-33

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.  相似文献   

Tectonic Significance of the Taitung Canyon, Huatung Basin, East of Taiwan     

Jean-Claude Sibuet  Shu-Kun Hsu  Alain Normand 《Marine Geophysical Researches》2004,25(1-2):95-107

Since the beginning of formation of Proto-Taiwan, the subducting Philippine (PH) Sea plate has moved continuously through time in the N307° direction with respect to Eurasia (EU), tearing the EU plate. The subducting EU plate includes a continental part in the north and an oceanic part in the south. The boundary B between these two domains corresponds to the eastern prolongation of the northeastern South China Sea ocean-continent transition zone. In the Huatung Basin (east of Taiwan), the Taitung Canyon is N065° oriented and is close and parallel to B. Seismic profiles show that the southern flank of the canyon corresponds to a fault with a normal component of a few tens of meters in the sediments and possible dextral shearing. Several crustal earthquakes of magnitude >%6 are located beneath the trend of the Taitung Canyon and focal mechanisms suggest that the motion is right-lateral. Thus, faulting within the sedimentary sequence beneath the Taitung Canyon is a consequence of underlying dextral strike-slip crustal motions. As the continental part of the EU slab located north of B has been recently detached, some subsequent dextral strike-slip motion might be expected within the EU slab, along the ocean-continent transition zone, which is a potential zone of weakness. We suggest that the dextral strike-slip motion along the ocean-continent boundary of the EU slab might trigger the observed dextral strike-slip motion within the overlying PH Sea crust and the associated faulting within the sediments of the Huatung Basin, beneath the Taitung Canyon. An erratum to this article is available at .  相似文献   

土工布充砂袋的应用及其研究进展   总被引：10，自引：1，他引：10  

张文斌  谭家华 《海洋工程》2004,22(2):98-104

对土工布充砂袋技术和国内外的应用进行了介绍。鉴于土工布充砂袋属于一种新兴起的土工新材料和新技术，在设计和工程实际中还存在着许多急待解决的问题，着重对各种典型状态和典型环境下的土工布充砂袋的变形、应力和土工布充砂袋堆的稳定性研究进展进行综述，最后提出进一步研究的思路。  相似文献   

Recorder-Dependent Temperature Error of Expendable Bathythermograph     

Shoichi Kizu  Kimio Hanawa 《Journal of Oceanography》2002,58(3):469-476

The accuracy of temperature measurement by the expendable bathythermograph (XBT) is examined for five types of recorders by comparison with co-located CTD measurements and statistical analysis of temperature profiles including an isothermal layer. A positive temperature error increasing downward is occasionally detected for two types of Japanese recorder which have been commonly used among Japanese oceanographic institutions and marine observatories. This error resembles to that reported by Bailey et al. (1989) and Wright (1991) for a different type of recorders, although its cause is not clearly understood. The irregular occurrence of the error suggests that the problem is not solely due to the recorders but rather by some inconsistency of the whole measuring system including them, an XBT probe and sea water. The error is estimated to increase at a rate of O (0.1°C/100 m), and it could be close to 1°C at the deepest part of the profiles (760 m for Tsurumi T-7). This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

软土海岸地区测量控制点标志的设立     

苏衍坤  李新国  朱绪伟  苏衍国 《海洋测绘》2007,27(3):43-47

分析了软土、湿地、滩涂地区特殊地理环境对测量控制点的影响;主要探讨了此类地区控制点标志的设计、施工。借助于建筑桩基技术和道桥施工方法,首次成功实现了某三角洲湿地滩涂地区统一布网。几年来,结合滩涂湿地测量、海岸防护和滩涂开发工程对部分控制点进行了初步检测,给出了部分检测数据。应用和检测均表明:桩基标石可较好地解决软土、湿地、滩涂地区控制点布设难题,显著提高软土海岸地区测量控制点标志的稳固性,从而延长控制网的可使用期。  相似文献   

ASM1中污水水质参数与化学计量系数的估测     

王波 《海岸工程》2002,21(4):6-12

简要介绍了活性污泥1号模型中14个污水水质参数与5个化学计量系数的估测方法和典型取值。  相似文献   

Mean flow and variability in the southwestern East Sea     

Kyung-Il Chang  Nelson G. Hogg  Moon-Sik Suk  Sang-Kyung Byun  Young-Gyu Kim  Kuh Kim 《Deep Sea Research Part I: Oceanographic Research Papers》2002,49(12)

The Ulleung Basin is one of three deep basins that are contained within the East/Japan Sea. Current meter moorings have been maintained in this basin beginning in 1996. The data from these moorings are used to investigate the mean circulation pattern, variability of deep flows, and volume transports of major water masses in the Ulleung Basin with supporting hydrographic data and help from a high-resolution numerical model. The bottom water within the Ulleung Basin, which must enter through a constricted passage from the north, is found to circulate cyclonically—a pattern that seems prevalent throughout the East Sea. A strong current of about 6 cms⁻¹ on average flows southward over the continental slope off the Korean coast underlying the northward East Korean Warm Current as part of the mean abyssal cyclonic circulation. Volume transports of the northward East Korean Warm Current, and southward flowing East Sea Intermediate Water and East Sea Proper Water are estimated to be 1.4 Sv (1 Sv=10⁻⁶ m³ s⁻¹), 0.8 Sv, and 3.0–4.0 Sv, respectively. Deep flow variability involves a wide range of time scales with no apparent seasonal variations, whereas the deep currents in the northern East Sea are known to be strongly seasonal.  相似文献   

哀牢山-红河断裂带中段应变分析   总被引：1，自引：0，他引：1  

周勇  吴世敏  周萍 《热带海洋学报》2003,22(2):17-29

对哀牢山—红河断裂带中段和平—水塘剖面、墨江—元江剖面和其它地段的岩石应变及磁组构进行了分析，表明应变强度的校正磁各向异性度PJ从断裂带向西至三叠系明显降低，变形强度向西迅速减弱。磁化率椭球体主轴展布反映出剪切带内、外变形方式的改变。剪切带内，以水平走滑运动为主；向西则以水平缩短为主。在应变分析中，对断裂带内的S—C组构两组面理夹角、杏仁体和石榴石应变标志体进行了测量，结果显示，剪切带内的磁组构和岩石组构间关系较差。此外，还对这两条剖面中的三叠系进行了应变和磁组构分析，找出了它们与磁化率椭球体对应轴率间的相关性。  相似文献   

单中继星单低轨卫星的联合定轨精度分析     

SU Mu-dan  ZHENG Yong  DU Lan  CONG Dian-wei 《测绘学院学报》2008,(1)

针对由单中继星和单低轨卫星组成的联合定轨系统,给出了系统内不同轨道卫星摄动项的选取方案和卫星间的可见性判别模型。在模拟出含有白噪声的四程测距观测数据文件的基础上,研究了测距精度和采样弧段对联合定轨中高、低轨卫星定轨精度的影响。得出如下结论:联合定轨更有利于对低轨卫星的轨道改进;同样的采样时间条件下,测距噪声越小定轨精度越高,并且采样时间越短它的影响越明显;同样的测距噪声条件下,所用资料的采样时间越长精度越高,但当测距精度很高时,TDRS达到最好定轨精度所需的采样时间相应有所缩短。并在定出轨道后进行了轨道预报,分析了轨道预报的趋势及精度。  相似文献   

智能全站仪在大型压力容器焊接变形监测中的应用     

CHEN Ji-hua  JIANG Yan-yun  HUANG Jian-hua  CHU-hu 《测绘学院学报》2008,(3)

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。  相似文献