Experimental study of deformable connection consisting of buckling‐restrained brace and rubber bearings to connect floor system to lateral force resisting system          下载免费PDF全文

Georgios Tsampras  Richard Sause  Robert B. Fleischman  Jose I. Restrepo 《地震工程与结构动力学》2017,46(8):1287-1305

This paper presents experimental and numerical studies of a full‐scale deformable connection used to connect the floor system of the flexible gravity load resisting system to the stiff lateral force resisting system (LFRS) of an earthquake‐resistant building. The purpose of the deformable connection is to limit the earthquake‐induced horizontal inertia force transferred from the floor system to the LFRS and, thereby, to reduce the horizontal floor accelerations and the forces in the LFRS. The deformable connection that was studied consists of a buckling‐restrained brace (BRB) and steel‐reinforced laminated low‐damping rubber bearings (RB). The test results show that the force–deformation responses of the connection are stable, and the dynamic force responses are larger than the quasi‐static force responses. The BRB+RB force–deformation response depends mainly on the BRB response. A detailed discussion of the BRB experimental force–deformation response is presented. The experimental results show that the maximum plastic deformation range controls the isotropic hardening of the BRB. The hardened BRB force–deformation responses are used to calculate the overstrength adjustment factors. Details and limitations of a validated, accurate model for the connection force–deformation response are presented. Numerical simulation results for a 12‐story reinforced concrete wall building with deformable connections show the effects of including the RB in the deformable connection and the effect of modeling the BRB isotropic hardening on the building seismic response. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Cyclic behavior and failure mechanism of self‐centering energy dissipation braces with pre‐pressed combination disc springs          下载免费PDF全文

Long‐He Xu  Xiao‐Wei Fan  Zhong‐Xian Li 《地震工程与结构动力学》2017,46(7):1065-1080

A new type of bracing system composed of friction energy dissipation devices for energy dissipation, pre‐pressed combination disc springs for self‐centering and tube members as guiding elements is developed and experimentally studied in this paper. The mechanics of this system are explained, the equations governing its hysteretic responses are outlined and large‐scale validation tests of two braces with different types of disc springs are conducted under the condition of low cyclic reversed loading. The experimental results demonstrate that the proposed bracing system exhibits a stable and repeatable flag‐shaped hysteretic response with an excellent self‐centering capability and effective energy dissipation throughout the loading protocol. Furthermore, the maximum bearing force and stiffness are predicted well by the equations governing its mechanical behavior. Fatigue and destructive test results demonstrate that the proposed bracing system can maintain stable energy dissipation and self‐centering capabilities under large deformation cyclic loading even when the tube members exceed the elastic limit and that a larger bearing capacity is achieved by the system that has disc springs without a bearing surface. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

北京平原地区V_S30估算模型适用性研究   总被引：1，自引：1，他引：0  

江志杰  彭艳菊  方怡  吕悦军  修立伟  黄帅 《震灾防御技术》2018,13(1):75-86

本文使用基于钻孔测井数据的3类模型,即常速度外推模型、速度梯度模型、双深度参数外推模型,通过对北京地区460个深度超过30m的钻孔剪切波速资料进行分析,详细探究了V_S30估算模型在本研究区的适用性。研究结果表明双深度参数外推模型在估算V_S30上准确度很高,其不需要大量的数据进行回归分析,且不具有区域独立性,可以为全球包括北京地区场地类别划分提供依据,进而在震害快速评估中用于确定场地影响,是一种值得推广的估算模型。  相似文献   

近断层速度脉冲与震源机制的关系浅析   总被引：1，自引：1，他引：0  

罗全波  陈学良  高孟潭  李宗超  李铁飞  张振 《震灾防御技术》2018,13(3):646-661

本文初步分析了近断层速度脉冲的成因和特点,主要包括方向性效应与滑冲效应,并通过中国台湾集集地震的脉冲记录,分析了断层破裂方向和位移大小等震源参数对脉冲强度的影响。此外,基于有限移动源理论,说明了断层辐射与速度脉冲分布的关系,并探讨了利用运动学震源模型研究近断层地震动对速度脉冲影响的技术路线;评述了7种典型的等效速度脉冲模型,建议进一步研究等效速度脉冲函数与震源机制之间的关系。最后,简述了不同类型的断层引起速度脉冲的差异,并推测了产生脉冲型地震动的下限条件,同时展望该研究在地震预警方面的可能性。  相似文献   

Loading protocols for experimental seismic qualification of members in conventional and emerging steel frames     

Cheng Fang  Yiwei Ping  Yiyi Chen 《地震工程与结构动力学》2020,49(2):155-174

Quasi-static testing is one of the most commonly used experimental methods for examining the seismic performance of structural members. However, consistent loading protocols for experimental seismic qualification of members in emerging steel frames such as self-centering braced frames (SCBFs) as well as in some conventional ones including buckling-restrained braced frames (BRBFs) are still lacking. This paper aims to propose standardized loading protocols based on time-history dynamic analysis on a series of prototype building frames, including steel SCBFs, BRBFs, and moment-resisting frames (MRFs), where both far-field and near-fault earthquakes are considered. The methodology for the development of the loading protocols involves ground motion selection and scaling, design and analysis of prototype buildings, analysis results processing, and rainflow cycle counting, together with extra justification steps. The proposed loading protocols are consistently derived based on the MCE-level seismic hazard and 84^th percentile values of key seismic demand parameters. These parameters are number of damaging cycles N_t, maximum inter-story drift θ_max, inter-story drift range Δθ_i, sum of inter-story drift range ΣΔθ_i, and residual inter-story drift θ_r. The analysis confirms the variations in these seismic demands imposed on the different structural systems under different types of ground motions, highlighting the necessity of developing separate loading protocols for the different cases. The assumptions, decisions, and judgments made during the development of the loading protocols are elaborated, and the conditions and restrictions are outlined. The rationality of the proposed loading protocols is further justified through demonstrating the cumulative distribution function and energy dissipation demand of the systems.  相似文献   

Attenuation Characteristics of Earthquake Ground Motion for Large Volume Airgun     

CAI Huiteng  CHEN Yong  JIN Xing  XU Yihe  LI Wen 《中国地震研究》2019,33(4):544-556

In order to further deepen the understanding of seismic wave propagation characteristics induced by the large volume airgun source, experimental data from multiple fixed excitation points in Fujian Province were used to obtain the equivalent single excitation high signal-to-noise ratio velocity and displacement records through linear stacking and simulation techniques. Then the peak displacements of different epicentral distances were used to calculate the equivalent magnitude of the airgun source excitation at different fixed excitation points so as to establish the attenuation relationship between equivalent magnitude,epicenter distance and velocity peak. Our results show that:① Within 270 km of epicentral distance,for the large-volume airgun's single shot,the peak velocity range is about 700-4 nm/s,and the peak displacement range is about 200. 0-0. 2 nm;② The equivalent magnitude of the P-wave from the airgun source with a total capacity of 8,000 in 3 is 0. 181-0. 760,and the equivalent magnitude of the S-wave is 0. 294-0. 832. By contrast,the equivalent magnitude of the P-wave from the airgun source with a total capacity of 12,000 in 3 is 0. 533-0. 896,and the equivalent magnitude of the S-wave is 0. 611-0. 946. The S-wave energy is greater than the P-wave energy, and the excitation efficiency varies greatly with different excitation environment;③ The peak velocity increases with the equivalent magnitude,and decreases with the epicentral distance. The vertical component of the P-wave peak velocity is the largest among those three components,while the S-wave has the smallest vertical component and similar horizontal components. Hence,our research can provide an important basis for the quantitative judgment of the seismic wave propagation distance using the airgun and the design of the observation system in deep exploration or monitoring with airgun.  相似文献   

基于等效源的总强度磁异常非线性处理方法          下载免费PDF全文

孙石达  杜劲松  陈超  李端 《地球物理学报》2020,63(1):351-361

总强度磁异常(ΔT1)常规处理方法通常将其近似当作磁异常矢量在地磁正常场方向上的投影(ΔT2).然而对于高磁环境如磁铁矿处的磁异常场幅值可达104 nT甚至更大的情况,上述近似假设则不再成立,如采用常规处理方法可能会带来明显的误差.本文针对该问题,提出一种基于等效源的总强度磁异常非线性处理方法;该方法根据总强度磁异常获取流程,直接反演实测地磁场总强度幅值与正常场强度幅值之差来求取等效场源.本文首先通过模型试验,分析ΔT1与ΔT2的差异;然后将ΔT1当作ΔT2采用常规处理方法以及ΔT1采用新方法得到的结果作对比分析,结果表明新方法处理结果与理论值的差异为常规方法处理结果的1/5甚至更小,充分说明了新方法的有效性;最后将该方法应用于铁矿实测总强度磁异常处理实例中来转换计算磁异常总模量,其实际应用效果进一步体现了高幅值总强度磁异常数据处理过程中采用新方法的必要性.  相似文献   

基于NMM随钻电磁波传输信道特性分析   总被引：1，自引：0，他引：1       下载免费PDF全文

范业活  李威  聂在平  杨志强  孙向阳 《地球物理学报》2016,59(3):1125-1130

基于数值模式匹配法(NMM)与源等效原理,建立了随钻电磁波传输理论模型,可以同时考虑介质的径向和轴向非均质性,便于分析套管、泥浆、高导层、高阻层对信号传输的影响.通过理论计算结果与试验结果对比,验证了理论模型的正确性.在此基础上对地层电阻率、工作频率、套管、泥浆、钻柱导电性、高导层和高阻层对信号传输的影响进行了计算分析.  相似文献   

Seismic design and testing of buckling‐restrained braces with a thin profile          下载免费PDF全文

Pao‐Chun Lin  Keh‐Chyuan Tsai  Chieh‐An Chang  Yu‐Yun Hsiao  An‐Chien Wu 《地震工程与结构动力学》2016,45(3):339-358

A thin‐profile buckling‐restrained brace (thin‐BRB) consists of a rectangular steel casing and a flat steel core that is parallel to a gusset plate. A thin configuration reduces the width of the restraining member and thus saves usable space in buildings. However, deformable debonding layers, which cover the steel core plate in order to mitigate the difference between the peak tensile and compressive axial forces, provide a space for the steel core to form high mode buckling waves when the thin‐BRB is under compression. The wave crests squeeze the debonding layers and produce outward forces on the inner surface of the restraining member. If the restraining member is too weak in sustaining the outward forces, local bulging failure occurs and the thin‐BRB loses its compression capacity immediately. In order to investigate local bulging behavior, a total of 22 thin‐BRB specimens with a ratio of steel core plate to restraining steel tube depth ranging from 0.3 to 0.7 and axial yield force capacities ranging from 421 kN to 3036 kN were tested by applying either cyclically increasing, decreasing, or constant axial strains. The restraining steel tube widths of all the specimens were smaller than 200 mm and were infilled with mortar with a compressive strength of 97 MPa or 55 MPa. Thirteen of the 22 thin‐BRB specimens' restraining members bulged out when the compressive core strains exceeded 0.03. A seismic design method of the thin‐BRB in preventing local bulging failure is proposed in this study. Test and finite element model (FEM) analysis results suggest that the outward forces can be estimated according to the BRB compressive strength, steel core high mode buckling wavelength, and the debonding layer thickness. In addition, the capacity of the restraining member in resisting the outward forces can be estimated by using the upper bound theory in plastic analysis. Both the FEM analysis and test results indicate that the proposed method is effective in predicting the possibility of local bulging failure. Test results indicate that the proposed design method is conservative for thin‐BRB specimens with a large steel core plate to restraining steel tube depth ratio. This paper concludes with design recommendations for thin‐BRBs for severe seismic services. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Effect of non‐moment braced frame seismic deformations on buckling‐restrained brace end connection behavior: Theoretical analysis and subassemblage tests          下载免费PDF全文

Junxian Zhao  Fuxiong Lin  Zhan Wang 《地震工程与结构动力学》2016,45(3):359-381

In‐plane buckling‐restrained brace (BRB) end rotation induced by frame action is a commonly observed phenomenon in buckling‐restrained braced frames (BRBFs). However, its effect on BRB end connection behavior has not yet been clear. In this study, four BRB end deformation modes for quick determination of end rotational demand are proposed for non‐moment BRBF considering different BRB arrangements, installing story of BRBs, and boundary condition of corner gussets connected with column base. Key factors affecting BRB end rotation and flexural moments are examined theoretically by parametric analysis. Subassemblage tests of seven BRB specimens under horizontal cyclic loading were conducted by adopting two loading frames to impose the expected BRB end deformations. It shows that BRB end rotation subjected BRB ends to significant flexural moments, leading to premature yielding of BRB ends or even tendency of end zone buckling. The deformation modes, the flexural rigidity of BRB ends, and the initial geometric imperfections of BRBs were found to have significant influence on BRB end connection behavior. The triggering moment induced by BRB end rotation was the main contributor to end flexural moment. However, the moment amplification effect induced by flexure of BRB end zones became prominent especially for small flexural rigidity of BRB ends. Implications and future research needs for design of BRB end connections are provided finally based on the theoretical and experimental results. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献