桶形基础平台三维有限元稳定性分析     

钱荣  周锡礽  孙克俐  张伟 《海洋技术学报》2003,22(4):49-53

以我国第一座桶形基础采油平台工程实例为原型，采用三维有限元计算方法对桶形基础稳定性分析。平台在波浪、风等荷载作用下，其稳定性不仅与平台的整体结构有关，而且与桶形基础及其周围土体相互作用相关。在计算中，利用薄层摩擦单元模拟土与结构间的相互作用，取得了很好的效果。分析结果表明桶形基础采油平台在设计条件下运行是较为稳定的。  相似文献   

Jason-1: Assessment of the System Performances     

J. Perbos  P. Escudier  F. Parisot  G. Zaouche  P. Vincent  Y. Menard  F. Manon  G. Kunstmann  D. Royer  L. -L. Fu 《Marine Geodesy》2003,26(3):147-157

On 7 December 2001, Jason-1 was successfully launched by a Boeing Delta II rocket from the Vandenberg Air Force Base, California. The Jason-1 satellite will maintain the high accuracy altimeter service provided since 1992 by TOPEX/Poseidon (T/P), ensuring the continuity in observing and monitoring the Ocean Dynamics (intraseasonal to interannual changes, mean sea level, tides, etc.). Despite one-fourth the mass and power, the Jason-1 system has been designed to have basically the same performance as T/P, measuring sea surface topography at a centimetric level. This new CNES/NASA mission also provides near real-time data for sea state and ocean forecast. The first two months of the Jason-1 mission have been dedicated to the assessment of the overall system. The goals of this assessment phase were:

1. To assess the behavior of the spacecraft at the platform and payload levels (Jason-1 being the first program to call on the PROTEUS versatile multimission platform for Low and Medium Earth Orbit Missions developed in partnership between Alcatel Space and CNES);

2. To verify that platform performance requirements are met with respect to Jason-1 requirements;

3. To verify that payload instruments performance requirements evaluated at instrument level are met;

4. To assess the performance of the Jason-1 Ground System.

This article will display the main outputs of the assessment of the system. It will demonstrate that all the elements of the onboard and ground systems are within the specifications. Provision of data to the Jason-1 Science Working Team started at the end of March 2002. This is the goal of a six-month phase after closure of the initial assessment phase to derive the error budget of the system in terms of altimetry user products.  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

The DNA de-methylating agent 5-azacytidine does not restore CYP1A induction in PCB resistant Newark Bay killifish (Fundulus heteroclitus)     

Xabier Arzuaga  Wanda Calcao  Adria Elskus 《Marine environmental research》2004,58(2-5):517

Newark Bay (NB) killifish (Fundulus heteroclitus) have been chronically exposed to environmental contaminants that activate the aryl hydrocarbon receptor (AHR) and are tolerant to toxic effects and CYP1A induction provoked by AHR ligands. Resistance to CYP1A induction could be due to an epigenetic mechanism such as DNA methylation. We measured in-ovo CYP1A catalytic activity (ethoxyresorufin-O-deethylase, EROD) in NB and reference site killifish embryos aqueously exposed to various concentrations of the de-methylating agent 5-azacytidine, 5-AC (5, 50 and 500 μ(micro)M) with or without 0.2 μ(micro)g/l of the CYP1A inducer 3,3^′,4,4^′,5 pentachlorobiphenyl (IUPAC PCB126). Neither PCB126 alone, nor PCB126 plus 5-AC, induced EROD above levels in vehicle treated Newark Bay fish. In reference site fish, the same PCB126 dose provoked a 7.4-fold EROD induction relative to controls. We conclude that Newark Bay killifish are resistant to CYP1A induction by co-planar PCBs during early embryological development and our data suggests that DNA methylation does not play a critical role in resistance to CYP1A induction in this model.  相似文献   

温度对金红色大鳞副泥鳅(Paramisgurnus dabryanus)孵化、仔鱼活力和性别分化的影响     

马本贺  王海华  马爱军  黄智慧  李燕华  王梦杰  孙志宾 《海洋与湖沼》2022,53(2):448-456

以大鳞副泥鳅(Paramisgurnus dabryanus)新品系“赣红1号”为对象,探究了不同温度(20,23,26,29,32℃)对其受精卵孵化、仔鱼活力和性别分化的影响。结果显示,当温度在20~32℃范围内时,培育周期和孵化周期与温度均呈负相关关系,均随着温度的升高而缩短。培育周期在各温度组间差异显著(P<0.05),孵化周期在29和32℃组间差异不显著,其余各组间均具有显著差异(P<0.05)。随着温度的升高,孵化率先升高后降低,26℃时孵化率达到最高;畸形率呈现与孵化率相反的趋势,26℃时畸形率最低,且显著低于20、29和32℃组(P<0.05);仔鱼的不投饵存活系数(SAI)随着温度的升高而逐渐降低,各组间差异显著(P<0.05),23℃时SAI值为59.77,最大可存活时间为15日龄;此外,雄性率随温度的升高而增加,高温可促进个体趋向雄性发育。研究发现“赣红1号”受精卵孵化、仔鱼活力和性别分化均受到温度的重要影响,结合生产实际和试验数据,其孵化和仔鱼培育的适宜温度应保持在23~26℃。  相似文献   

广西沿岸海平面变化的关联维数研究     

梁士楚 《热带海洋学报》2001,20(2):15-19

采用相空间重构和关联维数方法，研究了广西沿岸月平均海平面变化的分形特征，结果表明，相空间重构的延迟时间τ为3△t，当关联维数趋于饱和时，石头埠，北海和龙尾的相空间维数为7，而涠洲岛为9，它们的关联维数平均值平均值分别为6.6507,6.5414,6.7059.  相似文献   

鲈鱼胆汁中芘及代谢产物含量与水体中芘含量的关系     

林建清  洪华生  王新红  陈伟琪 《台湾海峡》2004,23(2):123-130

运用GC—MS的方法和荧光分光光度法，研究鲈鱼分别暴露于0．1、1．0和10．0μg／dm^3质量浓度芘溶液中7d，水体中芘及其鲈鱼胆汁中芘和1-羟基芘含量的变化,实验结果显示：(1)鲈鱼对水体中的芘具有非常显著的去除作用。(2)随着芘暴露浓度的增大，鲈鱼对芘的代谢去除作用增强。(3)随着暴露时间的延长和芘暴露浓度的增大，胆汁的1-羟基芘浓度递增。(4)鲈鱼胆汁具有较高的芘浓度，对海水中的芘具有较强的富集作用。(5)鲈鱼胆汁的1-羟基芘及芘的浓度与水体芘浓度均具有很好的相关性，对于指示水体的芘污染程度具有一致性；可作为指示水体芘污染程度的生物标志物。  相似文献   

SSA1—1型声学水位在长江口潮位站的应用     

万里明 《台湾海峡》1996,15(2):210-214

本文介绍了长江口区水文泥沙概况，举例说明了ＳＳＡ１－１型声水位计在崇头潮位站比测试验和投产应用情况，结果表明该水位计是收集长江口区潮位资料较理想的仪器。  相似文献   

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique     

Marco Ortiz 《Marine Ecology》2002,23(1):1-9

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.  相似文献   

3D gravity modelling for Anyongbok Seamount in the East Sea     

Moo Hee Kang  Hyun-Chul Han  Hyesu Yun  Gee Soo Kong  Kyong O. Kim  Youn Soo Lee 《Marine Geophysical Researches》2007,28(3):257-269

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.  相似文献