首都圈地区现今断层活动的数学模拟及地震危险性讨论     

李群芳  张云柱  高忠宁 《大地测量与地球动力学》1995,(1)

以首都圈地区现今活动断层上近２０年的位移测量资料为依据，用二维线弹性有限元对该区断层的活动特征进行了拟合，并结合有关资料讨论了该区的地震危险性。结果表明：１９７７－１９８６年间该区主压应力优势方位与华北较一致，约为Ｎ４５°－８０°Ｅ；１９８６－１９９０年其主压应力方向向北偏转，约为Ｎ５°－６０°Ｅ；１９９０年至现在其主压应力又向东偏转，角度大于第一阶段，约为Ｎ８０°－９５°Ｅ。该区的张家口－延庆一带近期有发生中强震的可能；丰镇－阳高－大同地区和凉城－古营盘地区应力较高，也应引起注意。  相似文献   

密度和压缩系数的散射层析成像法   总被引：1，自引：1，他引：0  

袁晓晖  王妙月 《地球物理学报》1991,34(6):753-761

本文在速度成像的基础上研究了同时对密度和压缩系数成像的散射波层析成像法.对不同散射角度的计算可以得到一系列反演图像,拟合这些图像,从而可以有效地达到对密度和压缩系数（或速度）成像的目的.与单纯的速度成像相比,增加了反演的难度.首先是对资料的方位性要求增加;其次是对资料的利用率下降.即便如此,从对较少量的炮点和检波点资料的数值计算来看,仍取得了满意的成像结果.我们对组成字母“A”的散射体结构进行了成像计算,结果能够同时再现密度和压缩系数,成像清晰,表明了方法的可行性,并能应用于复杂结构的成像问题.  相似文献   

青藏高原及邻近区域的S波三维速度结构   总被引：25，自引：5，他引：20  

周兵  秦建业 《地球物理学报》1991,34(4):426-441,T001

本文收集了WWSSN台网和我国台网中13个地震台站的长周期地震记录,用140条10-90s瑞利波频散曲线和作者提出的Tarantola-Backus面波频散层析成象方法,作了青藏高原及邻区的速度反演,得出该地区岩石层速度结构的三维图象.结果表明,1.在10-110km深度范围内,速度结构出现与大地构造特征相关的分区性,显示出四个构造单元:青藏块体、柴达木-巴颜喀拉-三江块体、塔里木块体和印度块体.2.高原内部,深度为10-70km内速度较低,莫霍界面呈不对称盆形分布,藏北那曲附近地壳厚度超过70km,高原边缘壳厚为45-50km,90-110km为高速异常,表明高原内部存在上地幔盖层.3.高原北部的班公湖断裂和东部的三江断裂系是该区重要的分界线,是岩石层结构存在明显差异的重要接触部位,可能是冈瓦纳古陆与欧亚古陆的缝合带.4.柴达木-巴颜喀拉-三江块体内部速度分布不均匀,地壳厚度由北向南从45km加深到60km;在深度90-110km存在一低速层.5.塔里木地块内速度随深度均匀增加,从地壳到上地幔110km内没有发现低速层.地壳厚度约50km.  相似文献   

论裸眼井中的“共振纵波”和“共振横波”   总被引：3，自引：0，他引：3  

唐晓明  郑传汉 《地球物理学报》1991,34(1):125-128

一、引言 文献[1]和[2]指出,充流体裸眼井中存在频率确定、波速恒定、且沿传播方向不衰减的“共振纵波”和“共振横波”。本文的目的在于论证并指出,这两种波是不存在的。 二、论证 设一点源位于z=0的井轴上,则井轴上z处的声波频率响应为  相似文献   

海相碳酸盐岩层系不整合量化研究及其意义——以四川盆地北部二叠系为例   总被引：2，自引：1，他引：1  

李儒峰  郭彤楼  汤良杰  陈国飞 《地质学报》2008,82(3):407-412

本文以四川盆地北部二叠系为例,将层序地层分析和沉积盆地波动过程分析相结合,提出了运用沉积波动过程分析研究沉积记录不完整性的量化方法,该方法可以相对准确地定量描述盆地形成演化过程中的升降运动,恢复无地层"记录"中的沉积-剥蚀过程,进而定量分析盆地的沉积-剥蚀过程、计算沉积间断(不整合)内的地层剥蚀量、认识其时空分布规律.同时,通过实际钻井及"人工井"的波动过程分析,结合地震剖面解释成果,可以作出主要不整合的空间分布图、各层位的剥蚀厚度图和原始厚度图、各期构造的剥蚀量分布图等重要基础图件,为盆地进一步系统分析及盆地模拟打好基础,结合沉积相研究及构造样式分析还可分析盆地沉积中心、生油层、盖层、储层等在时空中的变化规律.由于沉积盆地的升降波动过程直接影响着盆地的埋藏史、热史和生、排烃史,因此通过沉积波动过程的系统分析不仅能正确建立盆地演化的地质模型,还可以正确认识油气形成与分布规律,有效指导油气勘探.  相似文献   

Seismic Hazard Analysis — Quo vadis?     

Jens-Uwe Klügel   《Earth》2008,88(1-2):1-32

The paper is dedicated to the review of methods of seismic hazard analysis currently in use, analyzing the strengths and weaknesses of different approaches. The review is performed from the perspective of a user of the results of seismic hazard analysis for different applications such as the design of critical and general (non-critical) civil infrastructures, technical and financial risk analysis. A set of criteria is developed for and applied to an objective assessment of the capabilities of different analysis methods. It is demonstrated that traditional probabilistic seismic hazard analysis (PSHA) methods have significant deficiencies, thus limiting their practical applications. These deficiencies have their roots in the use of inadequate probabilistic models and insufficient understanding of modern concepts of risk analysis, as have been revealed in some recent large scale studies. These deficiencies result in the lack of ability of a correct treatment of dependencies between physical parameters and finally, in an incorrect treatment of uncertainties. As a consequence, results of PSHA studies have been found to be unrealistic in comparison with empirical information from the real world. The attempt to compensate these problems by a systematic use of expert elicitation has, so far, not resulted in any improvement of the situation. It is also shown that scenario-earthquakes developed by disaggregation from the results of a traditional PSHA may not be conservative with respect to energy conservation and should not be used for the design of critical infrastructures without validation. Because the assessment of technical as well as of financial risks associated with potential damages of earthquakes need a risk analysis, current method is based on a probabilistic approach with its unsolved deficiencies.

Traditional deterministic or scenario-based seismic hazard analysis methods provide a reliable and in general robust design basis for applications such as the design of critical infrastructures, especially with systematic sensitivity analyses based on validated phenomenological models. Deterministic seismic hazard analysis incorporates uncertainties in the safety factors. These factors are derived from experience as well as from expert judgment. Deterministic methods associated with high safety factors may lead to too conservative results, especially if applied for generally short-lived civil structures. Scenarios used in deterministic seismic hazard analysis have a clear physical basis. They are related to seismic sources discovered by geological, geomorphologic, geodetic and seismological investigations or derived from historical references. Scenario-based methods can be expanded for risk analysis applications with an extended data analysis providing the frequency of seismic events. Such an extension provides a better informed risk model that is suitable for risk-informed decision making.  相似文献   

Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis     

Mohammad Mokhtari  Iraj Abdollahie Fard  Khaled Hessami 《Natural Hazards》2008,47(2):185-199

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.  相似文献   

1.0GPa和常温至1100 ℃条件下角闪石斜长片麻岩的V_p变化:实验测量与理论计算   总被引：3，自引：0，他引：3  

蒋玺  周文戈  刘丛强  谢鸿森  刘永刚 《岩石学报》2008,24(10)

在1．0GPa、常温至1100℃条件下测量了角闪石斜长片麻岩的纵波速度（Vp）,并统计了不同温度实验产物中各种矿物的体积百分含量。结果显示,1．0GPa下,角闪石斜长片麻岩的Vp首先随温度升高（室温至700℃）缓慢降低约6％,然后（700—850℃）快速降低约6％,再（850～950℃）转而急剧升高15％～25％,最后（T〉950℃）又快速下降。实验产物分析表明在高温高压下α-石英-β石英相变和岩石部分熔融是岩石Vp异常变化的主要因素。由取样产物的矿物含量和弹性参数,计算了各温度条件下岩石的Vp得出与实验测量相同的波速-温度变化趋势,即Vp随温度升高先缓慢降低,接着快速降低后又急剧升高,最后又快速减小。实验测量和理论计算对比研究表明,通过高温高压下岩石中的物相变化观测结果进行岩石波速的计算,是检验岩石弹性波速测量结果和研究地球内部地震波结构的一种有效方法。  相似文献   

新疆可可托海—四川简阳地学断面岩石圈与软流圈结构   总被引：4，自引：1，他引：3       下载免费PDF全文

蔡学林曹家敏  朱介寿 《中国地质》2008,35(3):375-391

运用现代构造解析理论和方法,对新疆可可托海—四川简阳人工地震测深剖面与天然地震面波层析成像进行构造解析基础上,综合地质学、深源岩石包体构造岩石学和地球化学以及其他地球物理学标志等多学科综合研究显示,高速块体或幔块构造的几何结构型式是控制该区岩石圈构造格局和岩石圈表层构造变形基本条件之一。本文建立起该地学断面地壳及岩石圈与软流圈速度结构模型和物质组成结构模型,划分出岩石圈3种几何结构模式:克拉通陆根状结构、造山带楔状结构和高原陆根状结构,以及岩石圈二类构造演化类型:克拉通型岩石圈和增厚型岩石圈。在系统论述断面地壳及岩石圈结构构造类型特征基础上,探讨了该断面软流圈结构特征,岩石圈与软流圈相互作用及其地幔动力学模式。  相似文献   

斜向波对直立式防波堤堤头作用的试验研究     

唐筱宁  饶永红 《海岸工程》2005,24(2):7-12

直立式防波堤堤头在斜向波浪作用下波浪力的计算在现行的技术规范中尚属空白。通过物理模型试验给出了堤头结构设计所需的波压分布图，指出了波浪入射方向和地形对堤头所受波浪力的贡献有时可以超过波高和波周期，根据现行规范按波浪正向入射计算堤头所受的波浪力偏于安全。  相似文献