基于遗传算法的最优证券投资组合模型   总被引：2，自引：0，他引：2  

陈科燕  肖冬荣 《南京气象学院学报》2003,26(5):707-711

为了研究能使风险损失率最小、收益最大的最优证券投资组合问题，首先提出了多目标规划模型，并采用模糊优选法将多目标模型单目标化。随后尝试采用遗传算法来对其求解，给出了模型的遗传算法编码规则和算法步骤。最后通过实例论证了模型的合理性及遗传算法的有效性。  相似文献   

螺旋坐标下的因子分解合成炮叠前深度偏移          下载免费PDF全文

张文生  张关泉 《地球物理学报》2003,46(4):520-525

在合成炮叠前深度偏移的基础上，提出了一种高效的合成炮叠前深度偏移方法，即在螺旋坐标下用因子分解进行波场外推的混合法. 用因子分解进行波场外推分为因果过程和反因果过程两个显式求解过程. 这种螺旋坐标下的显式求解过程,提高了波场外推的效率. 根据相位编码原理,对多个射线参数的合成波场进行了编码叠加,基于射线参数实现了MPI并行计算,进一步提高了计算效率. 在推导了有关公式并进行定量分析之后,对Marmousi复杂模型进行了计算,并作了比较,结果表明本文方法具有精度高和速度快的特点,可用于实际资料的计算.  相似文献   

FLOW FIELD IN SCOURED ZONE OF CHANNEL CONTRACTIONS   总被引：1，自引：0，他引：1  

RajkumarV.RAIKAR SubhasishDEY 《国际泥沙研究》2004,19(4):292-311

Experiments were conducted in a laboratory flume to measure the two-dimensional turbulent flow field in the scoured zone of channel contractions under a clear-water scour condition. The Acoustic Doppler Velocimeter (ADV) was used to detect the flow field at different vertical lines along the centerline of uncontracted (main channel) and contracted zones of the channel. The distributions of time-averaged velocity components, turbulent intensity, turbulent kinetic energy, and Reynolds stresses are presented in nondimensional graphical form. The bed shear stresses are computed from the measured Reynolds stresses being in threshold condition within the zone of contraction where bed was scoured. The data presented in this paper would be useful to the investigators for the development of kinematic flow model and morphological model of scour at a channel or river contraction.  相似文献   

Numerical simulations for coupled rock deformation and gas leak flow in parallel coal seams   总被引：3，自引：0，他引：3  

Peide Sun> 《Geotechnical and Geological Engineering》2004,22(1):1-17

Based on the new viewpoint of interaction mechanics for solid and gas, gas leakage in parallel deformable coal seams can be understood. That is, under the action of varied geophysical fields, the methane gas flow in a double deformable coal seam can be essentially considered to be compressible with time-dependent and mixed permeation and diffusion through a pore-cleat deformable, heterogeneous and anisotropic medium. From this new viewpoint, coupled mathematical models for coal seam deformation and gas leak flow in parallel coal seams were formulated and the numerical simulations for slow gas emission from the parallel coal seams are presented. It is found that coupled models might be close to reality. Meanwhile, a coupled model for solid deformation and gas leak flow can be applied to the problems of gas leak flow including mining engineering, gas drainage engineering and mining safety engineering in particular the prediction of the safe range using protective layer mining where coal and gas outbursts can efficiently be prevented. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Urban stormwater thermal gene expression models for protection of sensitive receiving streams          下载免费PDF全文

A.M.A. Sattar  B. Gharabaghi  F. Sabouri  A.M. Thompson 《水文研究》2017,31(13):2330-2348

Thermal impact of typical high‐density residential, industrial, and commercial land uses is a major concern for the health of aquatic life in urban watersheds, especially in smaller, cold, and cool‐water streams. This is the first study of its kind that provides simple easy‐to‐use equations, developed using gene expression programming (GEP) that can guide the assessment and the design of urban stormwater management systems to protect thermally sensitive receiving streams. We developed 3 GEP models using data collected during 3 years (2009–2011) from 4 urban catchments; the first GEP model predicts event mean temperature at the inlet of the pond; the second model predicts the stormwater temperature at the outlet of the pond; and the third model predicts the temperature of the stormwater after flowing through a cooling trench and before discharging to the receiving stream. The new models have high correlation coefficients of 0.90–0.94 and low prediction uncertainty of less than 4% of the median value of the predicted runoff temperatures. Sensitivity analysis shows that climatic factors have the highest influence on the thermal enrichment followed by the catchment characteristics and the key design variables of the stormwater pond and the cooling trench. The general method presented here is easily transferable to other regions of the world (but not necessarily the exact equations developed here); also through sensitivity and parametric analysis, we gained insight on the key factors and their relative importance in modelling thermal enrichment of urban stromwater runoff.  相似文献   

基于并行计算的海洋平台谱分析疲劳筛选技术研究     

李洛东  刘成名  梁园华 《海洋工程》2018,36(5):56-64

为了得到海洋平台疲劳失效风险最大的焊接区域,提出了以有限元网格单元应力为基础的谱分析筛选方法,并开发了程序。程序采用并行计算架构,单次完成数万个单元的累积损伤度/疲劳寿命计算,并通过有限元软件以云图方式显示疲劳寿命。采用该程序计算双浮筒半潜式平台的疲劳寿命。结果表明,该型平台疲劳失效风险较高的区域为立柱与上壳体下浮体连接对角线转角区域、浮筒中纵舱壁与立柱连接区域。并行计算方法的引入,大大缩减疲劳损伤度计算的分析时间,采用22核心的CPU,时间缩短为原来的1/18.5,17小时完成全平台外壳单元谱分析计算。  相似文献   

Parallelized combined finite-discrete element (FDEM) procedure using multi-GPU with CUDA     

Quansheng Liu  Weiqin Wang  Hao Ma 《国际地质力学数值与分析法杂志》2020,44(2):208-238

This paper focuses on the efficiency of finite discrete element method (FDEM) algorithmic procedures in massive computers and analyzes the time-consuming part of contact detection and interaction computations in the numerical solution. A detailed operable GPU parallel procedure was designed for the element node force calculation, contact detection, and contact interaction with thread allocation and data access based on the CUDA computing. The emphasis is on the parallel optimization of time-consuming contact detection based on load balance and GPU architecture. A CUDA FDEM parallel program was developed with the overall speedup ratio over 53 times after the fracture from the efficiency and fidelity performance test of models of in situ stress, UCS, and BD simulations in Intel i7-7700K CPU and the NVIDIA TITAN Z GPU. The CUDA FDEM parallel computing improves the computational efficiency significantly compared with the CPU-based ones with the same reliability, providing conditions for achieving larger-scale simulations of fracture.  相似文献   

基于等价权抗差估计和线性规划的天线曲面拟合算法     

苏小文  李志静  黄浩 《测绘与空间地理信息》2016,(7):207-209

现有天线曲面拟合算法均基于最小二乘法,难以消除多个粗差对拟合结果的影响。本文基于等价权抗差估计思想,利用线性规划计算残差初值,再进行选权迭代计算。通过算例,证明本文方法能较好地探查多个粗差,且计算结果精度更高。  相似文献   

并行处理技术在地理信息数据处理中的应用     

徐道柱  金澄  焦洋洋 《测绘科学技术学报》2016,(6):629-634

随着地理信息存储量的飞速增长,传统的单进程、集中式的数据处理方式已不能满足基于网络的地理信息服务的效能要求。分析对比了OpenMP,MPI和MapReduce等主流并行编程模式,将关系型数据库与分布式空间数据管理系统相结合,提出了面向并行处理的地理信息存储模型和数据组织模型,将该模型与传统模型进行了对比分析,并基于MapReduce实现了地理空间数据并行处理框架,选取了矢量数据装载、影像数据装载以及数据切片作为典型数据处理案例开展对比实验,该技术方案的处理效率均数倍于传统技术方案。实验表明,该模型能够很好地支持并行处理框架,可为分布式环境下数据处理中心构建提供一个有效解决方案。  相似文献   

局部区域模型重力异常快速算法     

邢志斌  李姗姗  曲政豪  王伟  范昊鹏  贾鲁 《测绘科学技术学报》2016,(6):566-571

地球重力场位系数模型可以用于计算局部重力扰动场元。然而随着地球重力场模型阶次的提高、局域重力场计算范围的增大,其计算速度往往不能满足工程需求。针对这一问题,在对位系数模型泰勒级数展开的基础上提出了采用向量运算、混合编程的方法,同时对连带勒让德函数Belikov递推方法中与经纬度无关的量进行了预先计算,有效提高了计算速度。提出的方法对于利用超高阶次重力场模型快速解算大范围、高分辨率重力场元数据以及累加求和计算具有一定的参考与借鉴意义。  相似文献