High‐T and low‐P metamorphism in the Xilingol Complex of central Inner Mongolia,China: An indicator of extension in a previous orogeny          下载免费PDF全文

Jin‐Rui Zhang  Chun‐Jing Wei  H. Chu 《Journal of Metamorphic Geology》2018,36(4):393-417

The Xilingol Complex comprises biotite gneisses and amphibolite interlayers with extensive migmatization. Four representative samples were documented and found to record either two or three metamorphic stages. Phase modelling using thermocalc suggests that the observed assemblages represent the final stages that underwent cooling from temperature peaks, and are consistent with a fluid‐absent solidus in P–T pseudosections. Their P–T conditions are further constrained to be 5–6 kbar/680–725°C and 4–5 kbar/650–680°C for two garnet‐bearing gneiss samples, 4–5 kbar/660–730°C for a cordierite‐bearing gneiss sample, and 4–5 kbar/680–710°C for an amphibolite sample based on mineral composition isopleths, involving measured Mg content in biotite, anorthite in plagioclase, grossular and pyrope in garnet and Ti content in amphibole. The peak temperature conditions recovered are 760–790°C or >760°C at 5–6 kbar based on the composition isopleths of plagioclase, biotite, garnet and especially the comparison of melt contents between the calculated and observed. A pre‐peak heating process with slight decompression can be suggested for some samples on the basis of the core–rim increase in the plagioclase anorthite, and the stability of ilmenite. Zircon U–Pb dating using the LA‐ICP‐MS method provides systemic constraints on the metamorphic ages of the Xilingol Complex to be 348–305 Ma, interpreted to represent the post‐peak cooling stages. Moreover, metagabbroic dykes that intruded into the Xilingol Complex yield 317 ± 3 Ma from magmatic zircon, and are considered to have played a significant role for heat advection triggering the high‐T and low‐P metamorphism. Thus, the clockwise P–T paths involving pre‐peak heating, peak and post‐peak cooling recovered for the Xilingol Complex are consistent with an extensional setting in the Carboniferous that developed on a previous orogen in response to addition of mantle‐derived materials probably together with upwelling of the asthenospheric mantle.  相似文献   

Catchment properties,function, and conceptual model representation: is there a correspondence?          下载免费PDF全文

Fabrizio Fenicia  Dmitri Kavetski  Hubert H. G. Savenije  Martyn P. Clark  Gerrit Schoups  Laurent Pfister  Jim Freer 《水文研究》2014,28(4):2451-2467

This study investigates the possible correspondence between catchment structure, as represented by perceptual hydrological models developed from fieldwork investigations, and mathematical model structures, selected on the basis of reproducing observed catchment hydrographs. Three Luxembourgish headwater catchments are considered, where previous fieldwork suggested distinct flow‐generating mechanisms and hydrological dynamics. A set of lumped conceptual model structures are hypothesized and implemented using the SUPERFLEX framework. Following parameter calibration, the model performance is examined in terms of predictive accuracy, quantification of uncertainty, and the ability to reproduce the flow–duration curve signature. Our key research question is whether differences in the performance of the conceptual model structures can be interpreted based on the dominant catchment processes suggested from fieldwork investigations. For example, we propose that the permeable bedrock and the presence of multiple aquifers in the Huewelerbach catchment may explain the superior performance of model structures with storage elements connected in parallel. Conversely, model structures with serial connections perform better in the Weierbach and Wollefsbach catchments, which are characterized by impermeable bedrock and dominated by lateral flow. The presence of threshold dynamics in the Weierbach and Wollefsbach catchments may favour nonlinear models, while the smoother dynamics of the larger Huewelerbach catchment were suitably reproduced by linear models. It is also shown how hydrologically distinct processes can be effectively described by the same mathematical model components. Major research questions are reviewed, including the correspondence between hydrological processes at different levels of scale and how best to synthesize the experimentalist's and modeller's perspectives. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

A rainfall‐runoff model parameterized from GIS and runoff data          下载免费PDF全文

Thomas Skaugen  Christian Onof 《水文研究》2014,28(15):4529-4542

A guiding principle in hydrological modelling should be to keep the number of calibration parameters to a minimum. A reduced number of parameters to be calibrated, while maintaining the accuracy and detail required by modern hydrological models, will reduce parameter and model structure uncertainty and improve model diagnostics. In this study, the dynamics of runoff are derived from the distribution of distances from points in the catchments to the nearest stream. This distribution is unique for each catchment and can be determined from a geographical information system. The distribution of distances, will, when a celerity of (subsurface) flow is introduced, provide a distribution of travel times, or a unit hydrograph (UH). For spatially varying levels of saturation deficit, we have different celerities and, hence, different UHs. Runoff is derived from the superposition of the different UHs. This study shows how celerities can be estimated if we assume that recession events represent the combined UHs for different levels of saturation deficit. A new soil moisture routine which estimates saturated and unsaturated volumes of subsurface water and with only one parameter to calibrate is included in the new model. The performance of the new model is compared with that of the Swedish HBV model and is found to perform equally well for eight Norwegian catchments although the number of parameters to be calibrated in the module concerning soil moisture and runoff dynamics is reduced from seven in the HBV model to one in the new model. It is also shown that the new model has a more realistic representation of the subsurface hydrology. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

GIS research to address tensions in geography     

May Yuan 《Singapore journal of tropical geography》2021,42(1):13-30

The rise of Geographic Information Systems (GIS) technologies has been producing powerful tools for spatial data processing, management, analysis, modeling, and visualization. While supporting many tasks, GIS technologies have evoked new thinking and advanced intellectual inquiries in geography. Technological advances in other fields often stimulate new research questions and lead to revolutionary discoveries. The Hubble telescope revolutionizes our understanding of the universe, and 3D digital microscopes transform our knowledge of the coordination among biological, neurological, and physiological systems in living organisms. Can GIS claim similar revolutionary effects on geography? The answer is much up for debate. With GIS technologies, geographic studies can explore a broader extent across multiple scales in space and time and tackle problems through increasingly complex spatial statistics, visual analytics, computation, simulation, machine learning, and artificial intelligence. Both the Hubble telescope and 3D digital microscope were built based on scientific research that subserves the technological advances for inquiries into space and life systems. Likewise, GIScience research innovates GIS methods that enable novel geographic investigations and therefore contribute to geographic knowledge production. For the sake of simplicity, the term GIS used here represents both GIScience and GIS technologies. This essay attempts to clarify the intellectual contributions of GIS to geography on the following two questions: (1) What novel geographic thinking is driven by GIS? (2) How may GIS provoke new geographic inquiries and knowledge? Building on Nystuen's notion of four tensions that trigger geographic questions, the essay discusses how GIS innovations mediate historical tension, space‐time tension, dimensional tension and scale tensions.  相似文献   

Stratigraphic architecture of Solander Basin records Southern Ocean currents and subduction initiation beneath southwest New Zealand     

Jiten Patel  Rupert Sutherland  Michael Gurnis  Harm Van Avendonk  Sean P. S. Gulick  Brandon Shuck  Joann Stock  Erin Hightower 《Basin Research》2021,33(1):403-426

Solander Basin is characterized by subduction initiation at the Pacific‐Australia plate boundary, where high biological productivity is found at the northern edge of the Antarctic Circumpolar Current. Sedimentary architecture results from tectonic influences on accommodation space, sediment supply and ocean currents (via physiography); and climate influence on ocean currents and biological productivity. We present the first seismic‐stratigraphic analysis of Solander Basin based on high‐fold seismic‐reflection data (voyage MGL1803, SISIE). Solander Trough physiography formed by Eocene rifting, but basinal strata are mostly younger than ca. 17 Ma, when we infer Puysegur Ridge formed and sheltered Solander Basin from bottom currents, and mountain growth onshore increased sediment supply. Initial inversion on the Tauru Fault started at ca. 15 Ma, but reverse faulting from 12 to ca. 8 Ma on both the Tauru and Parara Faults was likely associated with reorganization and formation of the subduction thrust. The new seabed topography forced sediment pathways to become channelized at low points or antecedent gorges. Since 5 Ma, southern Puysegur Ridge and Fiordland mountains spread out towards the east and Solander Anticline grew in response to ongoing subduction and growth of a slab. Solander Basin had high sedimentation rates because (1) it is sheltered from bottom currents by Puysegur Ridge; and (2) it has a mountainous land area that supplies sediment to its northern end. Sedimentary architecture is asymmetric due to the Subtropical Front, which moves pelagic and hemi‐pelagic sediment, including dilute parts of gravity flows, eastward and accretes contourites to the shelf south of Stewart Island. Levees, scours, drifts and ridges of folded sediment characterize western Solander Basin, whereas hemi‐pelagic drape and secondary gravity flows are found east of the meandering axial Solander Channel. The high‐resolution record of climate and tectonics that Solander Basin contains may yield excellent sites for future scientific ocean drilling.  相似文献   

Extensional tectonics during the Tyrrhenian back‐arc basin formation and a new morpho‐tectonic map     

Maria F. Loreto  Nevio Zitellini  Csar R. Ranero  Camilla Palmiotto  Manel Prada 《Basin Research》2021,33(1):138-158

We present a new tectonic map focused upon the extensional style accompanying the formation of the Tyrrhenian back‐arc basin. Our basin‐wide analysis synthetizes the interpretation of vintage multichannel and single‐channel seismic profiles, integrated with modern seismic images, P‐wave velocity models, and high‐resolution morpho‐bathymetric data. Four distinct evolutionary phases of the Tyrrhenian back‐arc basin opening are further constrained, redefining the initial opening to Langhian/Serravallian time. Listric and planar normal faults and their conjugates bound a series of horst and graben, half‐graben and triangular basins. Distribution of extensional faults, active throughout the basin since Middle Miocene, allows us to define an arrangement of faults in the northern/central Tyrrhenian mainly related to a pure shear which evolved to a simple shear opening. At depth, faults accommodate over a Ductile‐Brittle Transitional zone cut by a low‐angle detachment fault. In the southern Tyrrhenian, normal, inverse and transcurrent faults appear to be related to a large shear zone located along the continental margin of the northern Sicily. Extensional style variation throughout the back‐arc basin combined with wide‐angle seismic velocity models allows to explore the relationships between shallow deformation, faults distribution throughout the basin, and crustal‐scale processes as thinning and exhumation.  相似文献   

Post‐orogenic sediment drape in the Northern Pyrenees explained using a box model     

Thomas Bernard  Hugh D. Sinclair  Mark Naylor  Frdric Christophoul  Mary Ford 《Basin Research》2021,33(1):118-137

The transition to a post‐orogenic state in mountain ranges has been identified by a change from active subsidence to isostatic rebound of the foreland basin. However, the nature of the interplay between isostatic rebound and sediment supply, and their impact on the topographic evolution of a range and foreland basin during this transition, has not been fully investigated. Here, we use a box model to explore the syn‐ to post‐orogenic evolution of foreland basin/thrust wedge systems. Using a set of parameter values that approximate the northern Pyrenees and the neighbouring Aquitaine foreland basin, we evaluate the controls on sediment drape over the frontal parts of the retro‐wedge following cessation of crustal thickening. Conglomerates preserved at approximately 600‐m elevation, which is ~ 300 m above the present mountain front in the northern Pyrenees are ca. 12 Ma, approximately 10 Myrs younger than the last evidence of crustal thickening in the wedge. Using the model, this post‐orogenic sediment drape is explained by the combination of a sustained, high sediment influx from the range into the basin relative to the efflux out of the basin, combined with cessation of the generation of accommodation space through basin subsidence. Post‐orogenic sediment drape is considered a generic process that is likely to be responsible for elevated low‐gradient surfaces and preserved remnants of continental sedimentation draping the outer margins of the northern Pyrenean thrust wedge.  相似文献   

Low‐accommodation and backwater effects on sequence stratigraphic surfaces and depositional architecture of fluvio‐deltaic settings (Cretaceous Mesa Rica Sandstone,Dakota Group,USA)     

Anna E. van Yperen  John M. Holbrook  Miquel Poyatos‐Mor  Cody Myers  Ivar Midtkandal 《Basin Research》2021,33(1):513-543

The adequate documentation and interpretation of regional‐scale stratigraphic surfaces is paramount to establish correlations between continental and shallow marine strata. However, this is often challenged by the amalgamated nature of low‐accommodation settings and control of backwater hydraulics on fluvio‐deltaic stratigraphy. Exhumed examples of full‐transect depositional profiles across river‐to‐delta systems are key to improve our understanding about interacting controlling factors and resultant stratigraphy. This study utilizes the ~400 km transect of the Cenomanian Mesa Rica Sandstone (Dakota Group, USA), which allows mapping of down‐dip changes in facies, thickness distribution, fluvial architecture and spatial extent of stratigraphic surfaces. The two sandstone units of the Mesa Rica Sandstone represent contemporaneous fluvio‐deltaic deposition in the Tucumcari sub‐basin (Western Interior Basin) during two regressive phases. Multivalley deposits pass down‐dip into single‐story channel sandstones and eventually into contemporaneous distributary channels and delta‐front strata. Down‐dip changes reflect accommodation decrease towards the paleoshoreline at the Tucumcari basin rim, and subsequent expansion into the basin. Additionally, multi‐storey channel deposits bound by erosional composite scours incise into underlying deltaic deposits. These represent incised‐valley fill deposits, based on their regional occurrence, estimated channel tops below the surrounding topographic surface and coeval downstepping delta‐front geometries. This opposes criteria offered to differentiate incised valleys from flood‐induced backwater scours. As the incised valleys evidence relative sea‐level fall and flood‐induced backwater scours do not, the interpretation of incised valleys impacts sequence stratigraphic interpretations. The erosional composite surface below fluvial strata in the continental realm represents a sequence boundary/regional composite scour (RCS). The RCS’ diachronous nature demonstrates that its down‐dip equivalent disperses into several surfaces in the marine part of the depositional system, which challenges the idea of a single, correlatable surface. Formation of a regional composite scour in the fluvial realm throughout a relative sea‐level cycle highlights that erosion and deposition occur virtually contemporaneously at any point along the depositional profile. This contradicts stratigraphic models that interpret low‐accommodation settings to dominantly promote bypass, especially during forced regressions. Source‐to‐sink analyses should account for this in order to adequately resolve timing and volume of sediment storage in the system throughout a complete relative sea‐level cycle.  相似文献   

Tectonic inversion assessed by integration of geological and geophysical data: The intracontinental Rio do Peixe Basin,NE Brazil     

David L. Vasconcelos  Fernando O. Marques  Francisco C. C. Nogueira  Yoe A. R. Perez  Francisco H. R. Bezerra  Rmulo C. Stohler  Jorge A. B. Souza 《Basin Research》2021,33(1):705-728

Common basin models assume that the post‐rift tectonic evolution of most basins is usually associated with tectonic quiescence. However, tectonic inversion during the post‐rift phase has been proposed for several sedimentary basins worldwide, but how and why it happens is still a matter of debate, especially in intracontinental settings where the lithosphere is old and thick. Here, we use geological and geophysical data from the Rio do Peixe Basin in NE Brazil to show evidence that intracontinental sedimentary basins can be tectonically inverted by far‐field compressive stresses acting on pre‐existing weakness zones of lithospheric‐scale where stresses can concentrate and inversion can occur. Geomorphological and field data combined with seismic reflection, gravimetric and borehole data show that: (a) inversion occurred along two main Precambrian lithospheric‐scale shear zones, the Patos (E‐W trending) and Portalegre (NE‐SW trending), which had already been reactivated as basin‐bounding faults during the earlier rift stage; (b) post‐rift reactivation affected (mostly) the original master normal faults with the largest rift displacements, and locally produced new reverse faults; (c) during contraction, deformation was partitioned between fault reactivation and buckling of the incompetent sediment pushed against the hard basement; (d) all these signs of inversion have been observed in the field and can be demonstrated on seismic reflection profiles; and (e) combined gravimetric and seismic data show that the main structures of the basin were followed by an inversion. These data are consistent with the operation of WSW‐ENE horizontal maximum compressive stress as a result of combined pushes of the Mid‐Atlantic Ridge (towards the W) and the Andes (towards the E), responsible for the post‐rift oblique inversion of normal faults inherited from the rift phase and formed with vertical maximum compressive stress.  相似文献   

Palaeoseismic records in lacustrine sediments—A case study of the Daqingshan piedmont fault and Hasuhai Lake in Inner Mongolia,China     

Junyi Wang  Zhongtai He  Linlin Li 《Basin Research》2021,33(1):681-704

As a traditional method for palaeoseismic studies, trenching can be combined with dating techniques to identify palaeoseismic events and the earthquake recurrence interval. However, when using trenches to study palaeoearthquakes, factors such as the active tectonic background of the earthquake‐caused structure, the lithology on both sides of the fault, the geomorphology location and type and the samples and methods for dating will affect the location of the trench. Thus, trenches should be carefully selected and used to identify the impact of ancient earthquakes. The results have substantial uncertainties and limitations. In recent years, scholars have made considerable progress in using other methods to reveal the palaeoseismic information of faults. Moreover, the history of fault activity may have been recorded in the lacustrine sediment adjacent to the fault. Hasuhai Lake is adjacent to the middle segment of the Daqingshan piedmont fault in Inner Mongolia. Since the Holocene, the region has experienced a temperate continental semi‐arid climate with little interference, and Hasuhai Lake and peripheral waters present weak hydrodynamic conditions that provide an ideal location for the study of palaeoseismic records in lacustrine sediments. Sediment samples and samples for dating were collected from three trenches excavated on the periphery of the Hasuhai Lake. Their variations in grain size and magnetic susceptibility revealed that wind and flowing water jointly produced the sedimentary conditions of Hasuhai sediments. The ¹⁴C dating results and variations in the grain size distribution, grain size components and magnetic susceptibility of sediments caused by seismic events obtained in this study were compared with those caused by a series of palaeoseismic events at the middle segment of the Daqingshan piedmont fault reported by previous studies using trenches, knickpoints and palaeosol records. The results identified seven palaeoseismic events recorded near Hasuhai Lake since 12,000 years. The combined use of lacustrine sediment variation characteristics and dating techniques is an effective method for studying palaeoseismic events.  相似文献