The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C     

Michael Stipp  Holger Stünitz  Rene Heilbronner  Stefan M. Schmid 《Journal of Structural Geology》2002,24(12)

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.  相似文献   

The “boudinage” question in the High-Ardenne Slate Belt (Belgium): a combined structural and fluid-inclusion approach     

I. Kenis  M. Sintubin  Ph. Muchez  E. A. J. Burke 《Tectonophysics》2002,348(1-3)

  相似文献   

A model of equilibrium bed topography for meander bends with erodible banks     

Stephen E. Darby  Ivana Delbono 《地球表面变化过程与地形》2002,27(10):1057-1085

Channel curvature produces secondary currents and a transverse sloping channel bed, along which the depth increases towards the outer bank. As a result deep pools tend to form adjacent to the outer bank, promoting bank collapse. The interaction of sediment grains with the primary and secondary flow and the transverse sloping bed also causes meanders to move different grain sizes in different proportions and directions, resulting in a consistent sorting pattern. Several models have been developed to describe this process, but they all have the potential to over‐predict pool depth because they cannot account for the influence of erodible banks. In reality, bank collapse might lead to the development of a wider, shallower cross‐section and any resulting flow depth discrepancy can bias associated predictions of flow, sediment transport, and grain‐size sorting. While bed topography, sediment transport and grain sorting in bends will partly be controlled by the sedimentary characteristics of the bank materials, the magnitude of this effect has not previously been explored. This paper reports the development of a model of flow, sediment transport, grain‐size sorting, and bed topography for river bends with erodible banks. The model is tested via intercomparison of predicted and observed bed topography in one low‐energy (5·3 W m^?2 specific stream power) and one high‐energy (43·4 W m^?2) study reach, namely the River South Esk in Scotland and Goodwin Creek in Mississippi, respectively. Model predictions of bed topography are found to be satisfactory, at least close to the apices of bends. Finally, the model is used in sensitivity analyses that provide insight into the influence of bank erodibility on equilibrium meander morphology and associated patterns of grain‐size sorting. The sensitivity of meander response to bank cohesion is found to increase as a function of the available stream power within the two study bends. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

DSQ型水管倾斜仪电压灵敏度的调整技巧     

佟国刚  王连权  李永振  冯兴春 《东北地震研究》2002,18(3):27-29

DSQ型水管倾斜仪是“九五”期间推出的数字化地震前兆仪器，本文介绍了一些如何调整换能器的电压灵敏度及调整中的技巧。  相似文献   

Interpretation of charging on fracture or frictional slip surface of rocks     

Akihiro Takeuchi  Hiroyuki Nagahama 《Physics of the Earth and Planetary Interiors》2002,130(3-4):285-291

Fracturing and frictional sliding of quartz and granite under dry condition generates fractoluminescence, charged particle emission and electromagnetic radiation. Various kinds of experiments indicate that surface charge density on fracture or frictional slip surface of quartz and granite is 10⁻⁴ to 10⁻² C/m² which is larger than bound charges induced by the disappearance of piezoelectricity due to the release of stress. Hole and electron trapping centers, which is found in semiconductor devices with the Si–SiO₂ system, are causes of surface charging on fracture or frictional slip surface of quartz crystal. The quantity of the surface charge is enough to cause corona discharge that can generate earthquake lights. The mechanism considering the hole and electron trapping centers has a probability to explain why non-piezoelectric minerals or rocks generate electromagnetic phenomena. It can be one of origins of seismo-electromagnetic phenomena (SEP).  相似文献   

Parameter identification for lined tunnels in a viscoplastic medium   总被引：2，自引：0，他引：2  

B. Lecampion  A. Constantinescu  D. Nguyen Minh 《国际地质力学数值与分析法杂志》2002,26(12):1191-1211

This paper is dedicated to the identification of constitutive parameters of elasto‐viscoplastic constitutive law from measurements performed on deep underground cavities (typically tunnels). This inverse problem is solved by the minimization of a cost functional of least‐squares type. The exact gradient is computed by the direct differentiation method and the descent is done using the Levenberg–Marquardt algorithm. The method is presented for lined or unlined structures and is applied for an elastoviscoplastic constitutive law of the Perzyna class. Several identification problems are presented in one and two dimensions for different tunnel geometries. The used measurements have been obtained by a preliminary numerical simulation and perturbed with a white noise. The identified responses match the measurements. We also discuss the usage of the sensitivity analysis of the system, provided by the direct differentiation method, for the optimization of in situ monitoring. The sensitivity distribution in space and time assess the location of the measurements points as well as the time of observation needed for reliable identification. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Sensitivity Analysis of a Feedforward Neural Network for Considering Genetic Mechanisms of Kuroko Deposits     

Matsuda  Setsuro  Koike  Katsuaki 《Natural Resources Research》2003,12(4):291-301

Exploration for volcanogenic massive sulfide deposits of the kuroko-type is underway in many places. Clarifying the spatial patterns of the metals in kuroko deposits will be useful for understanding their genetic mechanisms and for future exploration of such types of deposits. This study represents a spatial distribution analysis on the contents of principal metals of kuroko deposits: Cu, Pb, and Zn, in the Hokuroku district, northern Japan, by a feedforward neural network and 1917 sample data at 143 drillhole sites. The network, which consists of three layers, was trained by the principle of SLANS in which the numbers of neurons in the middle layer and training data are changed to improve estimation accuracy. Using the weight coefficients connecting adjacent neurons, sensitivity analysis of the neural network was carried out to identify factors influencing spatial distributions of the three metals. The coordinates depth (z) direction, Bouguer gravity, and specific lithology such as dacite were determined to be influencing factors. The high frequency of the z coordinate signifies that the metal contents differ to a large extent by depth. The sensitivity vector was defined using sensitivity coefficients for x, y, and z coordinates of an estimation point. We determined that the directions of large vectors were different inside and outside of the Hanawa-Ohdate area. This characteristic is considered to originate from the differences in the permeability of fractures that became the paths for rising ore solutions, and the depths that the solutions mixed with sea water.  相似文献   

焉耆盆地侏罗系低渗透储层敏感性评价   总被引：3，自引：3，他引：3  

李永林  杨道庆  田纳新  杨春红  马玉春  李峰 《矿物岩石》2003,23(1):77-80

焉耆盆地侏罗系具近物源沉积特点，储层成分成熟度和结构成熟度均较低，粘土矿物含量高，物性较差，属低渗透储层。“五敏”实验结果表明，储层均表现为强水敏特征，物性相对较好的储层还表现出强盐敏和中等偏弱速敏、碱敏等敏感性特征，盐酸对储层具有一定程度的改善，并进一步探讨钻探施工过程中油层保护的措施及应用效果。  相似文献   

石笋的荧光特征及其高分辨率气候环境记录   总被引：1，自引：0，他引：1  

刘启明  王世杰  欧阳自远  黎廷宇  谢兴能 《矿物岩石地球化学通报》2003,22(4):361-364

在分析石笋荧光特征的基础上，综述了石笋荧光应用于高分辨率气候环境记录的研究进展。石笋荧光强度反映了石笋中的有机酸含量，荧光波长特征受石笋中有机酸类型的控制，石笋中的有机酸由地表有机质经土壤水、洞穴滴水运移随碳酸盐而淀积，荧光强度与波长特征都是对地表气候环境信息的响应。通过提高荧光谱扫描精度，可得到高分辨率(1～10a)的气候环境变迁记录。分析了目前研究中存在的问题，并对发展趋势和进一步研究方向提出看法。  相似文献   

加卸载响应比(LURR)理论的实验研究   总被引：13，自引：1，他引：13  

余怀忠  尹祥础  夏蒙棼  梁乃刚  李敏  许昭永  彭克银  Wu Zhishen  Qi Li 《中国地震》2003,19(1):58-66

利用大尺度岩石试件破坏声发射实验，对加卸载响应比(Load/Unload Response Ratio)理论进行了实验研究。实验采用的加载条件力求能够模拟地下岩石的复杂受力过程。在加载过程中，岩石试件内部出现的损伤用声发射技术进行了记录。实验数据经过分析之后所得的结论与加卸载响应比理论预测的结果相符合。把加卸载响应比值Y的变化情况与声发射事件定位的过程相对比，也可以进一步看出岩石材料内部的损伤发展过程与加卸载响应比Y值的变化具有一致性。而高Y值的异常情况出现，又是在材料发生最终破坏之前，所以，可以用加卸载响应比理论定量地分析岩石试件损伤演化情况，从而对岩石材料的破坏及地震做出预测。实验结果再一次验证了加卸载响应比理论。  相似文献