三峡库区巫山新城超高加筋挡墙变形破坏及修复研究   总被引：2，自引：1，他引：2  

殷跃平  鄢毅  陈波  唐辉明  林彤 《工程地质学报》2003,11(1):89-99

结合三峡库区弃渣灾害的防治和回填增地,以巫山新城加筋土挡墙等实际工程为典型进行剖析,对加筋土挡墙,特别是超高加筋土挡墙变形破坏机制和过程进行了系统深入的研究。从加筋土挡墙填土物理力学性质室内试验研究入手,采用FLAC等数值计算方法,系统地研究了加筋土挡墙的应力状况和变形破坏特性。将离心模拟技术应用于超高多级加筋土挡墙(H=57m)的研究中,进行了三级加筋土挡墙的离心模型试验,对加筋土挡墙墙背土压力分布规律、挡墙面板和填土的沉降情况以及拉筋的拉力分布规律进行了详细而系统的研究。特别是精心设计出离心模型试验中三级挡墙的面板与拉筋的联结,较真实地反映了实际工程中加筋土挡墙整体复合结构的力学特性。根据研究结果,提出了巫山新城加筋土挡墙修复加固方案,编制了设计报告,并加以实施。目前,修复加固工程效果良好。　对库区,乃至全国超高加筋土挡墙的建设均有指导和示范作用。  相似文献   

PLS法与隧道围岩稳定性分类   总被引：5，自引：0，他引：5  

解华明  丁华 《物探与化探》2003,27(4):320-322

围岩稳定性是隧道工程支护设计的基本参数,采用偏最小二乘回归法,综合考虑多因变量影响因素,对隧道围岩稳定性分类进行回归建模,并取得较好效果.  相似文献   

CFRP对砖墙抗震加固对比试验研究与计算分析   总被引：20，自引：0，他引：20  

张祥顺  谷倩  彭少民 《世界地震工程》2003,19(1):77-82

结合一工程实践的需要，通过5片碳纤维布加固的新建墙体在周期反复荷载作用下的试验，研究了碳纤维布加固对砌体结构抗震性能的影响，以及砌砌体在碳纤维布加固后的受力特性，比较了不同加固方案对砖砌体加固效果的影响，在此基础上讨论了对碳纤维布加固砖墙抗剪承载力计算模型，并提出了简化计算公式。  相似文献   

新型组合连梁控制结构体系   总被引：9，自引：0，他引：9  

邓志恒  潘峰  陶晓光  唐光暹 《世界地震工程》2003,19(3):6-11

分析了连梁在水平力作用下的破坏机制，对连梁结构体系的发展及结构抗震控制进行了评述，在此基础上提出一种新型组合连梁控制结构体系，并对其进行了概念分析，提出了有待研究的若干关键问题。  相似文献   

空腔结构复合填充墙-钢框架抗侧力性能试验研究   总被引：4，自引：0，他引：4  

管克俭  李捍无  彭少民 《世界地震工程》2003,19(3):73-77

通过空腔结构复合填充墙-钢框架和同尺寸纯钢框架的对比试验，分析了空腔结构复合填充墙-钢框架的抗侧力性能和滞回性能。研究结果证明空腔结构复合填充墙是一种理想的抗侧力体系，可用于多层或小高层钢结构住宅，作为结构的抗侧力构件。  相似文献   

中国西北叠合盆地的主要构造特征   总被引：7，自引：2，他引：7  

汤良杰  贾承造  金之钧  马宗晋 《地学前缘》2003,10(Z1):118-124

探讨了中国西北地区大型叠合含油气盆地的主要特征 ,研究表明 ,在中国西北叠合盆地发展演化过程中 ,构造变革和构造耦合起着主导作用。构造变革包括大地构造格局的转变、沉积区和剥蚀区的转换、盆地类型的转换、大型区域性不整合的出现以及发生盆地构造反转等 ,这种构造变革具有多期性。叠合盆地构造耦合的方式主要涉及深部和浅部构造的耦合和盆山耦合等。盆山转换、盆山过渡带深部浅部构造的耦合、盆地沉降与造山带隆升耦合以及不同方向构造的耦合 ,反映了盆山耦合的多样性和复杂性。中国西北叠合盆地构造特征主要表现为构造的分层性、分带性、分段性、交叉性以及区域构造应力场的多变性 ,喜马拉雅运动对于中国西北叠合盆地最后的构造改造以及构造定型起着重要的制约作用。  相似文献   

河南省文峪金矿床构造控矿规律研究   总被引：6，自引：2，他引：6       下载免费PDF全文

徐叶兵  范永香 《地质与勘探》2003,39(5):30-34

峪金矿床是小秦岭金矿带内一大型金矿床，属韧—脆性叠加剪切带石英脉型金矿，构造是其首要控矿因素。早期韧性剪切带只对矿脉起宏观控制作用。晚期的脆性断裂为含金石英脉的直接控矿构造。成矿期脆性断裂的多次继承性活动分别控制了热液期4个成矿阶段。脆性断裂形成的空间形态对矿体形态产状具控制作用。有利的矿化富集部位为：①显示压扭性质的近东西向断裂沿走向产状变化处，沿倾向由陡变缓处，断裂面的凹凸转变处；②断裂分支复合部位；③成矿期断裂多次脉动的启张部位；④成矿期断裂构造继承性活动强的部位等。在构造控矿研究的基础上，结合前人部分研究成果。构建了该矿床构造控矿模式。  相似文献   

Estimation of fundamental periods of shear‐wall dominant building structures     

Can Balkaya  Erol Kalkan 《地震工程与结构动力学》2003,32(7):985-998

Shear‐wall dominant multistorey reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code (International Conference of Building Officials, Whittier, CA, 1997) and the Turkish Seismic Code (Specification for Structures to be Built in Disaster Areas, Ankara, Turkey, 1998) present limited information for their design criteria. In this study, consistency of equations in those seismic codes related to their dynamic properties are investigated and it is observed that the given empirical equations for prediction of fundamental periods of this specific type of structures yield inaccurate results. For that reason, a total of 80 different building configurations were analysed by using three‐dimensional finite‐element modelling and a set of new empirical equations was proposed. The results of the analyses demonstrate that given formulas including new parameters provide accurate predictions for the broad range of different architectural configurations, roof heights and shear‐wall distributions, and may be used as an efficient tool for the implicit design of these structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Statistical performance analysis of seismic‐excited structures with active interaction control     

Yunfeng Zhang  Wilfred D. Iwan 《地震工程与结构动力学》2003,32(7):1039-1054

This paper presents a statistical performance analysis of a semi‐active structural control system for suppressing the vibration response of building structures during strong seismic events. The proposed semi‐active mass damper device consists of a high‐frequency mass damper with large stiffness, and an actively controlled interaction element that connects the mass damper to the structure. Through actively modulating the operating states of the interaction elements according to pre‐specified control logic, vibrational energy in the structure is dissipated in the mass damper device and the vibration of the structure is thus suppressed. The control logic, categorized under active interaction control, is defined directly in physical space by minimizing the inter‐storey drift of the structure to the maximum extent. This semi‐active structural control approach has been shown to be effective in reducing the vibration response of building structures due to specific earthquake ground motions. To further evaluate the control performance, a Monte Carlo simulation of the seismic response of a three‐storey steel‐framed building model equipped with the proposed semi‐active mass damper device is performed based on a large ensemble of artificially generated earthquake ground motions. A procedure for generating code‐compatible artificial earthquake accelerograms is also briefly described. The results obtained clearly demonstrate the effectiveness of the proposed semi‐active mass damper device in controlling vibrations of building structures during large earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Predictive instantaneous optimal control of elastic structures during earthquakes     

Kevin K. F. Wong  Rong Yang 《地震工程与结构动力学》2003,32(14):2161-2177

A predictive instantaneous optimal control (PIOC) algorithm is proposed for controlling the seismic responses of elastic structures. This algorithm compensates for the time delay that happens in practical control applications by predicting the structural response over a period that equals the time delay, and by substituting the predicted response in the instantaneous optimal control (IOC) algorithm. The unique feature of this proposed PIOC algorithm is that it is simple and at the same time compensates for the time delay very effectively. Numerical examples of single degree of freedom structures are presented to compare the performance of PIOC and IOC systems for various time delay magnitudes. Results show that a time delay always causes degradation of control efficiency, but PIOC can greatly reduce this degradation compared to IOC. The effects of the structure's natural periods and the choice of control gains on the degradation induced by the time delay are also analyzed. Results show that shorter natural periods and larger control gains are both more sensitive and more serious to the degradation of control efficiency. Finally, a practical application of PIOC is performed on a six‐story moment‐resisting steel frame. It is demonstrated that PIOC contributes significantly to maintain stability in multiple degree of freedom structures, and at the same time PIOC has a satisfactory control performance. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献