Electromagnetic signals associated with stick–slip of quartz-free rocks     

Akito Tsutsumi  Nobumasa Shirai 《Tectonophysics》2008,450(1-4):79-84

We recorded clear transients in the electric and magnetic fields upon sudden slip in stick–slip experiments on dry, cylindrically shaped, quartz-free rock specimens of basalt and peridotite with a 30° saw-cut (representing a fault) at confining pressures of up to 120 MPa. The amplitudes of the measured electric field signals were always higher at the electrode pair oriented parallel to the strike of the fault than at the pair oriented perpendicular. This anisotropy suggests a preferred electric polarization normal to the slip surface. The transients in the electric and magnetic fields were observed only when the fault slip occurred by stick–slip mode, not by a stable mode of the sliding, and the amplitudes of the electric field signals increased with increasing stress drop. It is suggested that the generation process of the electromagnetic signals is closely related to the characteristic behavior of the fault at the time of the initiation of slip during stick–slip events, probably with respect to the intensity of the signals. We propose that one or both of the following two processes characteristic of the fault at the time of the initiation of slip during stick–slip events are essential for the generation of detectable electromagnetic signals: rapid slip along the simulated fault and separation of the rock masses across the fault.  相似文献   

准噶尔盆地腹部Z2井三叠系地层及沉积特征   总被引：1，自引：0，他引：1  

刘柏林  王启飞  阎泗民 《地层学杂志》2008,32(2):188-193

对准噶尔Z2井三叠系各组的岩性、电性特征进行了详细解释与描述,对各组的孢粉、大孢子组合特征展开了讨论,提出了该井三叠系地层划分为自碱滩组、克拉玛依组和百口泉组,且将其与邻区钻遇的三叠系进行了横向及纵向对比。在此基础上,通过对测、录井资料的精细解释,并借鉴前人的区域沉积相研究成果,探讨了该区三叠纪沉积环境。  相似文献   

Gouging abrasion test for rock abrasiveness testing     

V.A. Golovanevskiy  R.A. Bearman 《International Journal of Mineral Processing》2008

Wear parts of many mineral processing and mining equipment are often subjected to high stress loads applied at high speeds and at varying angles of incidence, where the prevalent mode of wear is high-stress gouging/sliding impact abrasion. Examples include crusher liners, wear liners in hoppers and chutes, picks on roadheaders, discs on tunnel boring machines and ground engaging tools. Abrasion under these conditions is characterised by a high material removal rate and thus has a direct bearing on wear rates and service life of the equipment concerned. However, at present there appears to be no method for rock abrasiveness assessment under these conditions. This paper describes a new Gouging Abrasion method and apparatus for testing abrasivity of rocks under high-stress gouging/sliding impact wear. A Gouging Abrasion Index (Gi) is introduced, which can be used for prediction and assessment of component life expectancy and efficiency of mineral processing and materials handling equipment. Experimental data from Gouging Abrasion testing of numerous Australian rock types are presented. It is suggested that the results of Gi testing can be used for wear rate predictions for a variety of mineral processing and materials handling equipment working under high-stress gouging/sliding impact abrasion conditions.  相似文献   

高、低煤阶煤层气藏地质特征及控气作用差异性研究   总被引：4，自引：0，他引：4  

王勃  巢海燕  郑贵强  李景明  郭志斌  王红岩  刘洪林  李贵中 《地质学报》2008,82(10):1396-1401

高、低煤阶煤层气地质特征及控气作用差异性是研究煤层气富集成藏的重要组成部分,是煤层气勘探开发理论研究过程中重要的基础性研究领域之一。本文以中国沁水、阜新盆地和美国粉河盆地等典型的含气盆地为例,探讨了高、低煤阶煤层气的储层物性差异,分析了构造控气和水文地质控气作用的差异性。研究表明,高煤阶气藏含气量高,CH4百分含量高,δ13C1值大于-38.75‰,储层渗透率变化小,储层改造难,构造热事件对煤层气的生成、富集贡献大,持续的水动力使气藏遭到破坏,且破坏幅度大,现今地下水格局对气藏的形成具有一定的影响;低煤阶气藏含气量低,CH4百分含量低,δ13C1值大于-49.11‰,储层渗透率变化大,储层易改造,煤热演化史及煤阶影响着煤层气的生成、富集,在煤层气生成过程中活跃的水动力是甲烷生成的主要的水文地质条件之一,但持续的水动力使气藏遭到破坏,且破坏幅度小,而合适的地层水矿化度则是低煤阶煤层气生成的重要条件,地下水格局对气藏的调整和改造起到决定性的影响。  相似文献   

Geotechnical properties of evaporite soils of the Dead Sea area     

Sam Frydman  Josef Charrach  Ian Goretsky 《Engineering Geology》2008,101(3-4):236-244

The Dead Sea Basin is the lowest point on earth and is tectonically subsiding. During the Holocene Period the climate became much drier with increasing evaporation whereby initially lacustrine sediments were deposited from the non-marine brines, giving a multi-layered stratigraphy of lime carbonate and halite sediments. The lime carbonate sediments are comprised of laminated, clay to silt sized, clastic sediments (calcite) and authigenic aragonite and gypsum. The halite commonly appears as rock salt. Chemical industries, based on harvesting the salts from the Dead Sea, have developed on both the Israeli and the Jordanian sides of the basin. The lime carbonate soils are used for dike construction, and these soils, together with significant salt layers, are encountered in the foundations of structures, dikes, and tailings dams, requiring definition of their geotechnical properties. Use of standard soil mechanics definitions and testing approaches for the lime carbonates have been found inapplicable, particularly in view of their exceptionally high saline content, and it has been necessary to develop new concepts. The rock salt is encountered at shallow depths, with unit weights considerably lower than those usually discussed in the literature, and with correspondingly different mechanical properties. The geotechnical properties of these soils, and approaches used to define them, are discussed in the paper.  相似文献   

Assessing soil erosion in Mediterranean karst landscapes of Lebanon using remote sensing and GIS   总被引：10，自引：0，他引：10  

R. Bou Kheir  C. Abdallah  M. Khawlie 《Engineering Geology》2008,99(3-4):239

Maps showing the potential for soil erosion at 1:100,000 scale are produced in a study area within Lebanon that can be used for evaluating erosion of Mediterranean karstic terrain with two different sets of impact factors built into an erosion model. The first set of factors is: soil erodibility, morphology, land cover/use and rainfall erosivity. The second is obtained by the first adding a fifth factor, rock infiltration. High infiltration can reflect high recharge, therefore decreasing the potential of surface runoff and hence the quantity of transported materials. Infiltration is derived as a function of lithology, lineament density, karstification and drainage density, all of which can be easily extracted from satellite imagery. The influence of these factors is assessed by a weight/rate approach sharing similarities between quantitative and qualitative methods and depending on pair-wise comparison matrix.The main outcome was the production of factorial maps and erosion susceptibility maps (scale 1:100,000). Spatial and attribute comparison of erosion maps indicates that the model that includes a measure of rock infiltration better represents erosion potential. Field investigation of rills and gullies shows 87.5% precision of the model with rock infiltration. This is 17.5% greater than the precision of the model without rock infiltration. These results indicate the necessity and importance of integrating information on infiltration of rock outcrops to assess soil erosion in Mediterranean karst landscapes.  相似文献   

Deep-seated gravitational slope deformations and their influence on consequent mass movements (case studies from the highest part of the Czech Carpathians)   总被引：3，自引：0，他引：3  

Jan Hradecký  Tomáš Pánek 《Natural Hazards》2008,45(2):235-253

Gravitational spreading of mountain ridges displays primary disequilibrium of flysch mountain areas of the Czech Carpathians. The progression of various types of mass movements is a product of long-term ridge disintegration and is predisposed by the geological structure of the area and the upper Tertiary-Quaternary morphogenesis of the mountain area. Deep-seated slope deformations are spatially interconnected by the occurrence of some other types of slope deformations (e.g. debris flows, debris slides, slumps, rock avalanches, etc.), which pose a considerable risk for the existence of human society. An important causative factor in these dynamically developing hazardous processes is, among other factors, the way in which land has been used in the last three centuries. Therefore, the occurrence of various types of slope deformations is studied in terms of their relation to deep-seated gravitational deformations and in terms of other limiting factors (structural geological, morphological and climatic factors, manmade impacts, etc.). The paper presents several case studies of slope deformations (Velká Čantoryje Mt, Lysá hora Mt, Ropice Mt and Smrk Mt) in the area of the Outer Carpathians within the territory of the Czech Republic and also adverts to some consequences in terms of the socioeconomic structure of the landscape.  相似文献   

Spatial Variability of Rock Depth in Bangalore Using Geostatistical, Neural Network and Support Vector Machine Models     

T. G. Sitharam  Pijush Samui  P. Anbazhagan 《Geotechnical and Geological Engineering》2008,26(5):503-517

Geospatial technology is increasing in demand for many applications in geosciences. Spatial variability of the bed/hard rock is vital for many applications in geotechnical and earthquake engineering problems such as design of deep foundations, site amplification, ground response studies, liquefaction, microzonation etc. In this paper, reduced level of rock at Bangalore, India is arrived from the 652 boreholes data in the area covering 220 km². In the context of prediction of reduced level of rock in the subsurface of Bangalore and to study the spatial variability of the rock depth, Geostatistical model based on Ordinary Kriging technique, Artificial Neural Network (ANN) and Support Vector Machine (SVM) models have been developed. In Ordinary Kriging, the knowledge of the semi-variogram of the reduced level of rock from 652 points in Bangalore is used to predict the reduced level of rock at any point in the subsurface of the Bangalore, where field measurements are not available. A new type of cross-validation analysis developed proves the robustness of the Ordinary Kriging model. ANN model based on multi layer perceptrons (MLPs) that are trained with Levenberg–Marquardt backpropagation algorithm has been adopted to train the model with 90% of the data available. The SVM is a novel type of learning machine based on statistical learning theory, uses regression technique by introducing loss function has been used to predict the reduced level of rock from a large set of data. In this study, a comparative study of three numerical models to predict reduced level of rock has been presented and discussed.  相似文献   

内蒙古天和永玄武岩成因：岩相学与矿物学分析     

杨宗锋  程黎鹿  罗照华  梁涛  潘颖  李德东  黄凡 《岩石学报》2008,24(11):2548-2562

天和永地区南北向出露的小面积单层碱性玄武岩,岩石中出现至少三种矿物共生组合关系。所有岩石均以橄榄石作为主要斑晶矿物,大颗粒环带橄榄石斑晶中心镁值为89．5,边缘镁值为70．3,小颗粒环带橄榄石镁值46．2～78．9。粒径最小的橄榄石聚集体和散布的基质橄榄石均无明显环带,前者镁值67．4～68．1,后者镁值65．5—72．1;单斜辉石由相对高钛高铝贫硅的散布柱状辉石和相对低钛低铝富硅的聚集粒状辉石组成,前者形成于低压快速淬火环境,镁值65．1—77．1,后者形成于富含挥发份的低压低过冷度环境,镁值77．7～78．0。所有单斜辉石均以次透辉石为主,个别为深绿辉石;斜长石以包含结构产出为主,为相对偏酸性的中长石An=33．7～37．4,CaO含量低与早期大量单斜辉石结晶有关。由于残余岩浆内K,0和Na20含量富集且极不均一,晚期结晶的长石同时出现了高钠长石、K-高钠长石（歪长石）和K-透长石;钛铁氧化物多数为晚期结晶的细粒基质矿物,少量以0．3ram左右的斑晶和橄榄石斑晶中的包裹体形式存在,可归属为钛铁尖晶石（Usp）-磁铁矿（Mt）固溶体系列,晚期逐渐向贫铝、铬和富钛方向演化。由于以上各种造岩矿物的晶出,导致残余岩浆形成的火山玻璃向贫镁、铁、钙和富铝、钾方向演化,火山玻璃的全碱含量变异趋势与全岩类似,均和SiO2含量无明显相关性,火山玻璃具有响岩和粗面安山岩成分特征,K2O／Na2O值变化大0．68～1．61,均为钾玄岩系列,Na2O含量依然呈现宽区间特征,是天和永玄武岩由钾质过渡到钠质的主要原因。天和永玄武质岩浆从地幔运移到地表仅需5小时-5天,大颗粒斑晶橄榄石和小颗粒基质橄榄石生长仅需几小时到几天,前者形成无须深部岩浆房停留,后者近似晚期岩浆快速淬火时间。高镁橄榄石斑晶与残余岩浆的扩散平衡时间约42天～252天。深部结晶的橄榄石在运移途中和地表流动过程中缺乏足够的时间和适宜的动力学条件而无法离开岩浆体系。全岩与火山玻璃间缺少中间过渡成分,呈两个相对集中的端元组分存在亦由晶出矿物无法离开岩浆体系所致。天和永玄武岩的成岩时间尺度远小于同化混染和岩浆分异的时间尺度,是岩浆作用过程未能明显影响其不均一原生岩浆性质的主要原因。因此,岩浆作用的某些物理过程分析是认识岩浆起源与岩浆作用过程及其对火成岩多样性的贡献的重要方面,同时对于理解和约束岩浆作用的某些化学过程也是十分有益的。  相似文献   

甘肃庆城庄19井区上三叠统延长组长82亚油层组低渗透储层的地质特征     

谢渊  ;谢正温  ;孙虎  ;鲁洪江  ;刘国良 《中国区域地质》2008,(6):844-854

长82亚油层组是甘肃庆城地区庄19井区上三叠统延长组中储集砂岩相对富集的层位,但砂岩低渗透性的特点显著,成为影响该区石油储产量增长的主要地质因素。结合前人的相关工作,通过钻井岩心观察、测井曲线分析、储层岩石实验测试等工作,详细地分析了庄19井区长82亚油层组低渗透储层的地质特征,认为沉积微相和压实作用、胶结作用是控制低渗透性储集砂岩发育和分布的主要地质因素,寻找以水下分流河道微相为代表的有利储集相带砂岩体是油气勘探的重要方向。  相似文献