GIOVE-A initial signal analysis     

Oliver Montenbruck  Christoph Günther  Sebastian Graf  Miquel Garcia-Fernandez  Johann Furthner  Hanspeter Kuhlen 《GPS Solutions》2006,10(2):146-153

In late December 2005 the GIOVE-A test satellite was launched by the European Space Agency (ESA) to secure the frequencies for the Galileo system and to provide a platform for testing the new navigation signals. We performed an initial assessment of these signals using the 30 m deep space antenna of the DLR ground station in Weilheim (Germany). The antenna gain raised the signals above the noise level, thus allowing a detailed analysis even without knowledge of the ranging codes. The present paper covers the analysis of the L1/E1 signals, which includes a discussion of the spectrum, the time domain signal and a decoding of the spreading codes for the Open Service.  相似文献   

Ostracoda (Arthropoda,Crustacea) in a Miocene oxygen minimum zone,Trinidad, West Indies: A test of the Platycopid Signal Hypothesis     

《Journal of South American Earth Sciences》2014

Studies of Recent ostracodes around the area of South America shed little light on the paleoenvironmental interpretation of Miocene assemblages. Consequently, interpretations of the Miocene ostracode assemblages must be supplemented using evidence from better documented taxa. Benthic foraminifera in samples from the Lower to Middle Miocene Brasso Formation at Brasso Village, Trinidad, have previously been used to distinguish three sample groupings (Beneath, Within and Above) around an oxygen minimum zone (OMZ), this being a layer of water within which dissolved oxygen concentrations can be as low as 0.1–1.0 mL/L. Using these same samples and the foraminiferal assemblage demarcations relative to the OMZ, this paper examines the associated and rich ostracode fauna of the Brasso Formation.The mean recovery of ostracode valves per sample was approximately three times greater in the Within OMZ sample group than in either of the Beneath OMZ or Above OMZ groups, perhaps reflecting the exclusion of macro-predators from within the OMZ. Individual rarefaction of species richness S to N = 300 valves was conducted for each sample group. This showed that S did not differ between the sample groups, ranging from 22.4 to 24.8. We used all ostracode species to model group separation. Based upon the Mahalanobis’ criterion, we obtained significant group separation using a model with four taxa: Munseyella ex gr. minuta, Argilloecia posterotruncata, Munseyella sp. and Xestoleberis sp., while a fifth, Argilloecia spp., provided a significant but minor increase in separation probabilities over all groups. The two most abundant species (Bradleya sp., Gangamocytheridea reticulata) were thus not the best species for detecting the OMZ. Platycopid ostracodes of the genus Cytherella were found throughout the section, rather than concentrated within the OMZ, which contradicts the Platycopid Signal Hypothesis that OMZs are characterized by platycopid dominance. The total distribution and turnover of both ostracodal and foraminiferal assemblages were compared and contrasted quantitatively using a total assemblage turnover index (ATI) and the paleoenvironmental importance evaluated. The correlated between-sample ATI is for both groups lowest within the OMZ.  相似文献   

钟房环境自动监测系统的研制     

和康元  安卫  刘春霞  王改霞  张裔功 《时间频率学报》2001,24(2):139-146

介绍了一种自行研制的钟房环境自动监测系统，该系统由温度、湿度、电压、烟雾等的传感器、信号调理、数据采集和报警等部分组成。长期试运行的结果表明系统达到了预期设计要求。  相似文献   

Reducing background effects in orchards through spectral vegetation index correction     

《International Journal of Applied Earth Observation and Geoinformation》2015

Satellite remote sensing provides an alternative to time-consuming and labor intensive in situ measurements of biophysical variables in agricultural crops required for precision agriculture applications. In orchards, however, the spatial resolution causes mixtures of canopies and background (i.e. soil, grass and shadow), hampering the estimation of these biophysical variables. Furthermore, variable background mixtures obstruct meaningful comparisons between different orchard blocks, rows or within each row. Current correction methodologies use spectral differences between canopies and background, but struggle with a vegetated orchard floor. This background influence and the lack of a generic solution are addressed in this study.Firstly, the problem was demonstrated in a controlled environment for vegetation indices sensitive to chlorophyll content, water content and leaf area index. Afterwards, traditional background correction methods (i.e. soil-adjusted vegetation indices and signal unmixing) were compared to the proposed vegetation index correction. This correction was based on the mixing degree of each pixel (i.e. tree cover fraction) to rescale the vegetation indices accordingly and was applied to synthetic and WorldView-2 satellite imagery. Through the correction, the effect of background admixture for vegetation indices was reduced, and the estimation of biophysical variables was improved (ΔR² = 0.2–0.31).  相似文献   

风廓线雷达估算大气返回信号功率方法研究   总被引：3，自引：1，他引：2  

马建立  阮征  葛润生  何建新 《气象科技》2009,37(1):89-92

基于风廓线雷达大气返回信号功率谱中噪声电平的估算方法,统计分析了北京延庆对流层风廓线雷达（CFL-08）2006年10～12月的探测数据。对该频段风廓线雷达环境噪声的空间和时间变化进行了分析,观测期间环境噪声在5km以下随高度递减,10月的平均环境噪声大于11月、12月的平均分布。给出目前风廓线雷达用信噪比估算大气返回信号功率的两种方法,并对两种方法进行了环境噪声的剔除,经过修正后的大气返回信号功率输出结果趋于一致。  相似文献   

面波频散谱多模式高分辨率成像的多道信号比较法     

易佳  刘伊克  胡昊  张郁山  杨宗奇 《地球物理学报》2021,64(5):1710-1720

高分辨率的面波频散谱成像是浅层地震勘探领域基于频散性质反演横波速度结构中的一个关键步骤.在天然地震探测领域,仅利用两个台站记录的线性信号比较法(LSC),被广泛用来计算面波的频散谱,并用于大尺度的面波层析成像.然而互相关的成像方式会造成频散谱在低频端较低的分辨率.非线性信号比较法(NLSC)利用指数函数克服了这个问题,同时极大地提高了频散谱的成像分辨率.然而,在研究中我们发现,仅利用两个台站的地震记录,并不能将面波的频散特性完整地考虑在内,导致LSC和NLSC方法对高阶模式的成像存在较大的误差.由于主动源面波勘探多道采集的方式,基于信号比较理论的多道信号比较法(MSC)充分利用多道地震信号,可以获得准确的多模式成像,然而该方法需要计算任意两道的频散谱并叠加,存在冗余的计算,导致计算效率较低.因此,本研究对MSC方法进行了相应的改进,通过追踪炮集记录上的面波波组提高了原方法的计算效率,同时,利用理论频散曲线进行叠加分析,验证了改进的MSC方法的正确性和有效性.通过与相移法、LSC和NLSC方法的对比分析,展示了MSC方法是一种准确的、高分辨率的面波多模式频散谱成像方法.实际地震资料的应用,揭示了MSC方法在浅层地震勘探中用于提取面波多模式频散信息的巨大潜力.  相似文献   

Feasibility of signal enhancement with multiple grounded‐wire sources for a frequency‐domain electromagnetic survey          下载免费PDF全文

Haigen Zhou  Yao Yao  Changsheng Liu  Jun Lin  Lili Kang  Gang Li  Xinsen Zeng 《Geophysical Prospecting》2018,66(4):818-832

Frequency‐domain electromagnetic methods with a grounded‐wire source are powerful tools in geophysical exploration. However, the signal may be too weak to guarantee the quality of survey data in complex electromagnetic environments, especially when the receiver is located in the air for the newly developed grounded‐source airborne frequency‐domain electromagnetic method. In this paper, a signal enhancement method with multiple sources is proposed to solve this problem. To evaluate the signal enhancement effect, we compared the signals generated by a single source and multiple sources with equal electric moment. The signal differences caused by synchronisation error and separation distance between source elements were analysed, and the methods to achieve maximum signal were introduced. Besides, we discussed the interaction between adjacent source elements to ensure the system safety, including the changes in output current and the safe distance between two sources using a dual‐source model. Lastly, a comprehensive field experiment was designed and conducted to test the multiple‐source method. The data processing results are comparable for single and dual sources, and the signal‐to‐noise ratio of dual source is higher in the field test. The subsurface resistivity structure at the test site is consistent with the previous controlled‐source audio‐frequency magnetotellurics method. These results show that signal enhancement with multiple sources is feasible. This study provides guidance to the application of multiple sources in field surveys when the survey environment is complex and rigorous.  相似文献   

A study of the geophysical response of distributed fibre optic acoustic sensors through laboratory‐scale experiments          下载免费PDF全文

Bence Papp  Daniela Donno  James E. Martin  Arthur H. Hartog 《Geophysical Prospecting》2017,65(5):1186-1204

In the past few years, distributed acoustic sensing has gained great interest in geophysics. This acquisition technology offers immense improvement in terms of efficiency when compared with current geophysical acquisition methods. However, the fundamentals of the measurement are still not fully understood because direct comparisons of fibre data with conventional geophysical sensors are difficult during field tests. We present downscaled laboratory experiments that enabled us to characterise the relationship between the signals recorded by conventional seismic point receivers and by distributed fibre optic sensors. Interrogation of the distributed optical fibre sensor was performed with a Michelson interferometer because this system is suited to compact test configurations, and it requires only a very simple data processing workflow for extracting the signal outputs. We show acoustic data that were recorded simultaneously by both the fibre optical interferometer and conventional three‐component accelerometers, thus enabling the comparison of sensor performance. We present results focused on the directionality of fibre measurements, on the amplitude variation with angle of incidence, and on the transfer function that allows accelerometer signals to be transformed into optical fibre signals. We conclude that the optical fibre response matches with the array of the displacement differences of the inline accelerometers deployed along the fibre length. Moreover, we also analysed the influence of various types of coupling and fibre cable coating on the signal responses, emphasising the importance of these parameters for field seismic acquisitions when using the distributed fibre optic technology.  相似文献   

高铁震源地震信号的挤压时频分析应用          下载免费PDF全文

王晓凯  陈文超  温景充  宁杰远  李嘉琪 《地球物理学报》2019,62(6):2328-2335

我国每天有数千趟高铁列车驰骋在纵横交错的高铁线路上,构成了十分理想的均布震源,但寻找适合高铁震源地震信号的处理方法是充分挖掘信息的关键.传统的频谱分析结果表明高铁震源所产生的地震信号具有明显的窄带分立谱特征,但无法精确获得高铁震源地震信号的时频变化规律.本文首次将挤压时频分析这种分析工具引入到高铁震源地震信号处理中,对中国南方某高铁沿线采集到的高铁震源地震数据进行了分析.处理结果表明:利用挤压时频分析能够更加精确地刻画频率成分随时间的变化,能够利用单检波器精确刻画高铁列车的运行状态(匀速、加速等);同时利用挤压时频变换还可高精度地重构出所需频带的信号,为提取高铁震源地震信号的特征成分提供了一种有力工具.  相似文献   

A high accurate automated first-break picking method for seismic records from high-density acquisition in areas with a complex surface     

Yinpo Xu  Cheng Yin  Xuefeng Zou  Yudong Ni  Yingjie Pan  Liangjun Xu 《Geophysical Prospecting》2020,68(4):1228-1252

As the application of high-density high-efficiency acquisition technology becomes more and more wide, the areas with complex surface conditions gradually become target exploration areas, and the first-break picking work of massive low signal-to-noise ratio data is a big challenge. The traditional method spends a lot of manpower and time to interactively pick first breaks, a large amount of interactive work affects the accuracy and efficiency of picking. In order to overcome the shortcoming that traditional methods have weak anti-noise to low signal-to-noise ratio primary wave, this paper proposes a high accurate automated first-break picking method for low signal-to-noise ratio primary wave from high-density acquisition in areas with a complex surface. Firstly, this method determines first-break time window using multi-azimuth spatial interpolation technology; then it uses the improved clustering algorithm to initially pick first breaks and then perform multi-angle comprehensive quality evaluation to first breaks according to the following sequence: ‘single trace → spread → single shot → multiple shots’ to identify the abnormal first breaks; finally it determines the optimal path through the constructed evaluation function and using the ant colony algorithm to correct abnormal first breaks. Multi-azimuth time window spatial interpolation technology provides the base for accurately picking first-break time; the clustering algorithm can effectively improve the picking accuracy rate of low signal-to-noise ratio primary waves; the multi-angle comprehensive quality evaluation can accurately and effectively eliminate abnormal first breaks; the ant colony algorithm can effectively improve the correction quality of low signal-to-noise ratio abnormal first breaks. By example analysis and comparing with the commonly used Akaike Information Criterion method, the automated first-break picking theory and technology studied in this paper has high picking accuracy and the ability to stably process low signal-to-noise ratio seismic data, has a significant effect on seismic records from high-density acquisition in areas with a complex surface and can meet the requirements of accuracy and efficiency for massive data near-surface modelling and statics calculation.  相似文献