GPS高程异常拟合精度的探讨     

戴玉民 《测绘与空间地理信息》2012,35(9):115-116

GPS技术在测量领域已广泛应用,但GPS拟合高程精度制约了其在领域内的推广普及。选择不同的高程异常拟合模型,对GPS高程拟合精度非常重要。通过对驿城区城市控制网进行不同数学模型的GPS高程异常拟合,验证了选择合适的拟合模型及分布合理的高精度水准点,能够解算出高精度的GPS拟合高程,满足一般测量工程的需要。  相似文献   

温度对武夷山不同海拔土壤有机碳矿化的影响   总被引：1，自引：0，他引：1  

郭剑芬  陈玲  林雪婷  孙杰 《福建地理》2012,(3):1-7

采用碱吸收法测定武夷山不同海拔土壤分别在15℃、25℃、35℃下培养35d时土壤有机碳矿化速率及矿化量的变化．结果表明,土壤有机碳矿化速率随培养时间延长而逐渐降低,尤以培养3d～7d时下降最为明显．各海拔土壤累积矿化量均随培养温度升高而逐渐增加．培养35d时15℃和35℃下土壤累积矿化量随海拔升高而增加,但25℃下黄红壤的累积矿化量高于红壤和黄壤而低于山地草甸土．各培养温度下,土壤有机碳平均矿化速率均以山地草甸土最高,红壤最低．而对于各海拔土壤,不同温度下土壤有机碳平均矿化速率大小顺序为：15℃〈25℃〈35℃．培养3d时温度为15℃／25℃黄壤的Q10值显著高于其他海拔土壤（P〈0．05）,但培养35d时15℃／25℃下的土壤Q10值以黄红壤的最高．培养3d和35d时,25℃／35℃下不同海拔土壤Q10值差异均不显著（P〉0．05）．根据土壤平均矿化速率计算的Q10值在温度范围为15℃／25℃时以黄壤的最高,但25℃／35℃时红壤的Q10值最大．  相似文献   

基于GIS和遥感的中国城市分布与自然环境关系的定量研究     

刘沁萍  田洪阵  杨永春 《地理科学》2012,(6):686-693

利用ArcGIS10、ENVI4.5、Visual FoxPro6.0等软件,采用空间分析技术手段,定量分析了中国655个建制城市的空间分布与河流、植被、地形起伏度、高程4种自然环境因素的关系,结论如下:①城市对水的依赖程度高,城市等级越高,依赖程度越强;②总体趋势上,植被状况越好,城市分布数目越多;城市对植被的依赖程度高,城市等级越高,依赖程度越强;③总体趋势上,地形起伏度越大,城市分布数目越少;地形起伏度对城市分布有较大影响,城市等级越高,影响程度越大;④高程对城市分布有较大影响,城市等级越高,影响程度越大。综合评价全国不同区域的城市发展适宜度,分析了适合城市发展的区域。  相似文献   

Topodata: Brazilian full coverage refinement of SRTM data   总被引：2，自引：0，他引：2  

Márcio de Morisson Valeriano  Dilce de Fátima Rossetti 《Applied geography (Sevenoaks, England)》2012,32(2):300-309

This work presents the selection of a set of geostatistical coefficients suitable for a unified SRTM data refinement from 3″ to 1″ through kriging over the entire Brazilian territory. This selection aimed at data potential for geomorphometric derivations, given by the preservation of detailed geometric characteristics of the resulting digital elevation models (DEM), which are sensitive to refining procedures. The development contained a long-term experimentation stage, when data refinement through kriging was locally developed to support distinct regional projects, followed by a unified selection stage, where the acquired experience was applied to select a single and unified interpolation scheme. In this stage, the selected geostatistical models with promising performances were tested for unified refinement on 40 Brazilian areas with distinct geological settings. Tested areas encompass reliefs varying from mountainous to plain. The effects of data preparation were observed on the perception of patterns (texture and roughness), as well as of singularities (edges, peaks, thalwegs etc.). Results were evaluated mainly through the examination of shaded reliefs, transects and perspectives observed in different scales. Terrains with low slopes and small amplitudes had their DEM promptly affected by the refining methods, as opposed to mountainous terrains. The evaluation, unambiguously confirmed by all consulted interpreters, converged into a refining model with outstanding performance in all tested conditions.  相似文献   

Stepped palaeosurfaces in southern Norway - interpretation of DEM -derived topographic profiles     

《Norsk geografisk tidsskrift. Norwegian journal of geography》2012,66(2):102-110

Bibliografien er selektiv, den søker å dekke arbeider av norske geografer og andre publikasjoner av spesiell geografisk interesse. Den omfatter en del utrykte arbeider som finnes i biblioteket ved Geografisk institutt ved Universitet i Oslo.  相似文献   

全野外数字化测图中高程数据出错的解决办法     

倪少华  姜志哲  徐庆 《东北测绘》2012,(3):184-186

在全野外数字化测图中,高程数据质量的好坏,直接影响地形图产品的质量,文章针对利用全站仪进行全野外数字化测图工作中,高程数据容易出错的几个环节,提出对高程数据出错的解决的方法。  相似文献   

工程常用坐标转换方法研究与分析     

朱元彪  陈华 《测绘信息与工程》2012,37(2):35-37

介绍了工程中常用的几种坐标转换方法,并开发程序对各种方法进行了试验分析,针对不同情况下的坐标转换问题,提出了一些解决方案。  相似文献   

基于DEM的江西潦河流域河网信息提取方法   总被引：2，自引：0，他引：2  

黄娟  申双和  殷剑敏 《气象与减灾研究》2008,31(1):49-53

介绍了GIS环境下数字高程模型（DEM）的预处理、水流方向确定、汇流累积量确定、河网生成,以及其他水文信息提取的原理和方法;基于DEM对江西潦河流域进行河网提取和流域边界的划分,并对试验结果进行了比较和分析。结果表明,利用GIS空间分析功能,基于DEM提取的潦河中上游数字河网与实际河网基本吻合;DEM精度和汇流能力阈值对提取的河网精度有着明显的影响,对于中小流域的潦河来说,1：50000精度的DEM和汇流能力为1000的阈值可满足实际应用的要求;基于DEM和ArcGIS提取的数字化河网,其水文要素（如坡度等）可直接作为流域预报模型参数,不仅大大提高了模型的效率,而且还可以方便地利用遥感等数据源,数据获取快速且成本低。从宏观效果上看,利用现有的GIS软件,基于DEM数据提取河网、流域范围等水文信息,从提取效率和结果的精度来说都是切实可行的;从微观上讲,已有的算法还无法确保计算结果与某些特殊地形区域（如平坦区域）的实际河网一致。  相似文献   

Effect of flying altitude and pulse repetition frequency on laser scanner penetration rate for digital elevation model generation in a tropical forest     

Chung-Cheng Lee  Chi-Kuei Wang 《地理信息系统科学与遥感》2018,55(6):817-838

In tropical forests, the penetration ability of airborne laser scanning (ALS) may be limited because of highly dense vegetation cover. However, in the typical planning of ALS surveys, the ability of laser pulses to penetrate forests is not considered. Nine round-trip flight lines covering the area of a tropical forest on the northeast side of the Tsengwen Reservoir in Taiwan were designed in this study. Five flight lines flew at altitudes of 1.525, 1.830, 2.135, 2.440, and 2.745 km, and the other four had pulse repetition frequencies (PRFs) of 100, 150, 200, and 250 kHz. The laser penetration index (LPI) is a quantitative index measuring the penetration ability of the ALS and consists of the ratio of the number of laser pulses reaching the forest floor to the total number of laser pulses. The LPI was used to represent the laser penetration rate and investigate the influence of flying altitude and PRF on the LPI. The results showed that as the flying altitude decreased by 1 km, the average LPI increased by 10%, and as the PRF decreased by 50 kHz, the average LPI increased by 2%. The effect of the LPI on digital elevation models (DEMs) was confirmed by visual images obtained by DEMs at five altitudes. The DEM obtained at an altitude of 2.745 km was coarsely textured, whereas that obtained at an altitude of 1.525 km was finely textured. The in-situ height data obtained from the electronic Global Navigation Satellite System (eGNSS) were compared with the data of the ALS-generated DEMs. The results indicated that when the LPI ≥60%, the height difference between the in situ data and DEM data was not prominent. However, when the LPI <60%, the ALS-derived DEM could be higher or lower than the in-situ height; the largest difference between the two was 1.7 m. The LPI of a forest should be considered for ALS survey planning, especially when consistent DEM precision for large tropical forest areas is paramount.  相似文献   

Effects of the intervals of tie points used in co-registration on the accuracy of digital elevation models generated by INSAR     

Weibao  Zou  Zhilin  Li  Xiaoli  Ding 《The Photogrammetric Record》2006,21(115):232-254

  相似文献