首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 375 毫秒
1.
The Digital Elevation Model (DEM) is one of the important parameters of soil erosion assessment and notable uncertainties are found in using different resolutions of the DEM. Revised Universal Soil Loss Equation model has been applied to analyze the effect of open-source DEMs with different resolution and accuracy on the uncertainties of soil erosion modelling in a part of the Narmada river basin in Madhya Pradesh in central India. Selected open-source DEMs are GTOPO30 (1 km), SRTM (30 and 90 m), CARTOSAT (30 m) and ASTER (30 m), used for estimating erosion rate. Results with better accuracy are achieved with the high-resolution DEMs (30 m) with higher vertical accuracy than the coarse resolution DEMs with lower accuracy. This study has presented potential uncertainties introduced by the open-source DEMs in soil erosion modelling for better understanding of appropriate selection and acceptable errors for researchers.  相似文献   

2.
Airborne laser scanning (ALS) is a widely used technology in the mapping of environment and forests. Data acquisition costs and the accuracy of the forest inventory are closely dependent on some extrinsic parameters of the ALS survey. These parameters have been assessed in numerous studies about a decade ago, but since then ALS devices have developed and it is possible that previous findings do not hold true with newer technology. That is why, the effect of flying altitudes (2000, 2500 or 3000 m), scanning angles (±15° and ±20° off nadir) and scanning modes (single- and multiple pulses in air) with the area-based approach using a Leica ALS70HA-laser scanner was studied here. The study was conducted in a managed pine-dominated forest area in Finland, where eight separate discrete-return ALS data were acquired. The comparison of datasets was based on the bootstrap approach with 5-fold cross validation. Results indicated that the narrower scanning angle (±15° i.e. 30°) led to slightly more accurate estimates of plot volume (RMSE%: 21–24 vs. 22.5–25) and mean height (RMSE%: 8.5–11 vs. 9–12). We also tested the use case where the models are constructed using one data and then applied to other data gathered with different parameters. The most accurate models were identified using the bootstrap approach and applied to different datasets with and without refitting. The bias increased without refitting the models (bias%: volume 0 ± 10, mean height 0 ± 3), but in most cases the results did not differ much in terms of RMSE%. This confirms previous observations that models should only be used for datasets collected under similar data acquisition conditions. We also calculated the proportions of echoes as a function of height for different echo categories. This indicated that the accuracy of the inventory is affected more by the height distribution than the proportions of echo categories.  相似文献   

3.
Validation of Indian National DEM from Cartosat-1 Data   总被引：1，自引：0，他引：1  
CartoDEM is an Indian National DEM generated from Cartosat-1 stereo data. Cartosat-1, launched in May, 2005, is an along track (aft ?5°, Fore +26°) stereo with 2.5 m GSD, give base-height ratio of 0.63 with 27 km swath. The operational procedure of DEM generation comprises stereo strip triangulation of 500?×?27 km segment with 10 m posting along with 2.5 m resolution ortho image and free—access posting of 30 m has been made available (bhuvan.nrsc.gov.in). A multi approach evaluation of CartoDEM comprising (a) absolute accuracy with respect to ground control points for two sites namely Jagatsinghpur -flat and Dharamshala- hilly; second site i.e. Alwar-plain and hilly with high resolution aerial DEM, (b) relative difference between SRTM and ASTERDEM (c) absolute accuracy with ICESat GLAS for two sites namely Jagatsinghpur-plain and Netravathi river, Western Ghats-hilly (d) relative comparison of drainage delineation with respect to ASTERDEM is reported here. The absolute height accuracy in flat terrain was 4.7 m with horizontal accuracy of 7.3 m, while in hilly terrain it was 7 m height with a horizontal accuracy of 14 m. While comparison with ICESat GLAS data absolute height difference of plain and hilly was 5.2 m and 7.9 m respectively. When compared to SRTM over Indian landmass, 90 % of pixels reported were within ±8 m difference. The drainage delineation shows better accuracy and clear demarcation of catchment ridgeline and more reliable flow-path prediction in comparison with ASTER. The results qualify Indian DEM for using it operationally which is equivalent and better than the other publicly available DEMs like SRTM and ASTERDEM.  相似文献   

4.
Voids caused by shadow, layover, and decorrelation usually occur in digital elevation models (DEMs) of mountainous areas that are derived from interferometric synthetic aperture radar (InSAR) datasets. The presence of voids degrades the quality and usability of the DEMs. Thus, void removal is considered as an integral part of the DEM production using InSAR data. The fusion of multiple DEMs has been widely recognized as a promising way for the void removal. Because the vertical accuracy of multiple DEMs can be different, the selection of optimum weights becomes a key problem in the fusion and is studied in this article. As a showcase, two high-resolution InSAR DEMs near Mt. Qilian in northwest China are created and then merged. The two pairs of InSAR data were acquired by TerraSAR-X from an ascending orbit and COSMO-SkyMed from a descending orbit. A maximum likelihood fusion scheme with the weights optimally determined by the height of ambiguity and the variance of phase noise is adopted to syncretize the two DEMs in our study. The fused DEM has a fine spatial resolution of 10 m and depicts the landform of the study area well. The percentage of void cells in the fused DEM is only 0.13 %, while 6.9 and 5.7 % of the cells in the COSMO-SkyMed DEM and the TerraSAR-X DEM are originally voids. Using the ICESat/GLAS elevation data and the Chinese national DEM of scale 1:50,000 as references, we evaluate vertical accuracy levels of the fused DEM as well as the original InSAR DEMs. The results show that substantial improvements could be achieved by DEM fusion after atmospheric phase screen removal. The quality of fused DEM can even meet the high-resolution terrain information (HRTI) standard.  相似文献   

5.
Three-dimensional (3D) spatial information is crucial for improving the quality of human life through urban planning and management, and it is widely utilized due to its rapid, periodic and inexpensive acquisition. In this context, extraction of digital surface and elevation models (DSM and DEM) is a significant research topic for space-borne optical and synthetic aperture radar (SAR) remote sensing. The DSMs include visible features on the earth’s surface such as vegetation, forest and elevated man-made objects, while DEMs contain only the bare ground. In this paper, using TerraSAR-X (TSX) high resolution Spotlight (HS) images, high-resolution interferometric DEM generation in a part of Istanbul urban area is aimed. This is not an easy task because of SAR imaging problems in complex geometry of urban settlements. The interferometric processing steps for DSM generation were discussed including critical parameters and thresholds to improve the quality of the final product and a 3 m gridded DSM was generated. The DSM-DEM conversion was performed by filtering and the quality of generated DEM was verified against a reference DEM from stereo photogrammetry with 3 m original grid spacing. The achieved root mean square error of height differences (RMSZ) varies from 7.09 to 8.11 m, depending on the terrain slope. The differential DEM, illustrates the height differences between generated DEM and the reference DEM, was generated to show the correlation between height differences and the coherence map. Finally, a perspective view of test area was created draping extracted DEM and a high-resolution IKONOS panchromatic image.  相似文献   

6.
In this paper, the digital elevation model (DEM) for a forest area is extracted from multi-baseline (MB) polarimetric interferometric synthetic aperture radar (PolInSAR) data. On the basis of the random-volume-over-ground (RVoG) model, the weighted complex least-squares adjustment (WCLSA) method is proposed for the ground phase estimation, so that the MB PolInSAR observations can be constrained by a generalized observation function and the observation contribution to the solution can be adjusted by a weighting strategy. A baseline length weighting strategy is then adopted to syncretize the DEMs estimated with the ground phases. The results of the simulated experiment undertaken in this study demonstrate that the WCLSA method is sensitive to the number of redundant observations and can adjust the contributions of the different observations. We also applied the WCLSA method to E-SAR L- and P-band MB PolInSAR data from the Krycklan River catchment in Northern Sweden. The results show that the two extracted DEMs are in close agreement with the Light Detection and Ranging (Lidar) DEM, with root-mean-square errors of 3.54 and 3.16 m. The DEM vertical error is correlated with the terrain slope and ground-cover condition, but not with the forest height.  相似文献   

7.
High-resolution digital elevation models (DEMs) generated by airborne remote sensing are frequently used to analyze landform structures (monotemporal) and geomorphological processes (multitemporal) in remote areas or areas of extreme terrain. In order to assess and quantify such structures and processes it is necessary to know the absolute accuracy of the available DEMs. This study assesses the absolute vertical accuracy of DEMs generated by the High Resolution Stereo Camera-Airborne (HRSC-A), the Leica Airborne Digital Sensors 40/80 (ADS40 and ADS80) and the analogue camera system RC30. The study area is located in the Turtmann valley, Valais, Switzerland, a glacially and periglacially formed hanging valley stretching from 2400 m to 3300 m a.s.l. The photogrammetrically derived DEMs are evaluated against geodetic field measurements and an airborne laser scan (ALS). Traditional and robust global and local accuracy measurements are used to describe the vertical quality of the DEMs, which show a non Gaussian distribution of errors. The results show that all four sensor systems produce DEMs with similar accuracy despite their different setups and generations. The ADS40 and ADS80 (both with a ground sampling distance of 0.50 m) generate the most accurate DEMs in complex high mountain areas with a RMSE of 0.8 m and NMAD of 0.6 m They also show the highest accuracy relating to flying height (0.14‰). The pushbroom scanning system HRSC-A produces a RMSE of 1.03 m and a NMAD of 0.83 m (0.21‰ accuracy of the flying height and 10 times the ground sampling distance). The analogue camera system RC30 produces DEMs with a vertical accuracy of 1.30 m RMSE and 0.83 m NMAD (0.17‰ accuracy of the flying height and two times the ground sampling distance). It is also shown that the performance of the DEMs strongly depends on the inclination of the terrain. The RMSE of areas up to an inclination <40° is better than 1 m. In more inclined areas the error and outlier occurrence increase for all DEMs. This study shows the level of detail to which airborne stereoscopically derived DEMs can reliably be used in high mountain environments. All four sensor systems perform similarly in flat terrain.  相似文献   

8.
This paper discusses the quantification of vertical surface displacements by means of grid-based digital elevation models (DEMs). The surface changes are quantified by comparing altitude and different topographic parameters, which have a geomorphic significance with respect to surface changes. This paper describes the choice of different spatial calculation techniques, considering DEM accuracy and the propagation of error for the different topographic parameters involved. The techniques are illustrated on two grid-based DEMs from Finsterwalderbreen, a 35 km2 sized valley glacier on south-western Spitzbergen, Norwegian High Arctic.  相似文献   

9.
The accuracy of DEMs shows wide variations from one terrain to another and it needs to be determined. This study evaluates NRSC (National Remote Sensing Centre, Hyderabad, India) CartoDEM V1 and V1.1R1 with respect to resampled ADS80 DEM for parts of the Himalayas. Both the test DEMs were properly registered with reference to resampled ADS80 DEM and then individually subtracted to get the difference DEMs. Visual and statistical analyses were performed to assess the quality of the tested DEMs in terms of visible terrain and vertical accuracy. For calculating the accuracies in different terrain classes, slope and aspect maps were generated from the ADS80 DEM. Properly registered Landsat5 TM data were used for the development of the land cover map with four classes. The overall vertical accuracy measured for CartoDEM V1 was 269.9 m (LE90), while CartoDEM V1.1R1 showed huge improvement in the accuracy with 68.5 m (LE90).  相似文献   

10.
ABSTRACT

The landslide, which occurred at Umyeon mountain (Mt. Umyeon) in Seoul, Korea in 2011, was a prime example that raised awareness about the landslide in the highly urbanized area. Although many studies have been done on Umyeon landslide, there is a lack of research that detects the area where the landslide occurred and quantifies the elevation changes through remote sensing data. In this regard, this paper aims to detect and assess topographic changes quantitatively over Mt. Umyeon by using digital elevation models (DEMs) derived from airborne laser scanning (ALS) data. Since Mt. Umyeon was hilly and covered with dense trees during summer, traces of the landslide were detected by estimating the spatially distributed uncertainty of ALS-derived DEMs. The probabilistic analysis with Bayes'? theorem considering the spatially distributed DEM of difference (DoD) uncertainty enabled to detect the landslide traces efficiently and was less affected by the influence of ALS errors. The results indicated that ALS-derived DEMs have the potential to detect landslides with their uncertainty estimation, although the ALS data were acquired in hilly and densely vegetated areas. Moreover, quantifying topographic changes due to landslides with high reliability is considered to be beneficial and practically helpful for disaster recovery.  相似文献   

11.
Cartosat–1 is the first Indian Remote Sensing Satellite capable of providing along-track stereo images. Cartosat–1 provides forward stereo images with look angles +26° and −5° with respect to nadir for generating Digital Elevation Models (DEMs), Orthoimages and value added products for various applications. A pitch bias of −21° to the satellite resulted in giving reverse tilt mode stereo pair with look angles of +5° and −26° with respect to nadir. This paper compares DEMs generated using forward, reverse and other possible synthetic stereo pairs for two different types of topographies. Stereo triplet was used to generate DEM for Himalayan mountain topography to overcome the problem of occlusions.For flat to undulating topography it was shown that using Cartosat-1 synthetic stereo pair with look angles of −26° and +26° will produce improved version of DEM. Planimetric and height accuracy (Root Mean Square Error (RMSE)) of less than 2.5 m and 2.95 m respectively were obtained and qualitative analysis shows finer details in comparison with other DEMs. For rugged terrain and steep slopes of Himalayan mountain topography simple stereo pairs may not provide reliable accuracies in DEMs due to occlusions and shadows. Stereo triplet from Cartosat-1 was used to generate DEM for mountainous topography. This DEM shows better reconstruction of elevation model even at occluded region when compared with simple stereo pair based DEM. Planimetric and height accuracy (RMSE) of nearly 3 m were obtained and qualitative analysis shows reduction of outliers at occluded region.  相似文献   

12.
Recent research results have shown that the performance of digital surface model extraction using novel high-quality photogrammetric images and image matching is a highly competitive alternative to laser scanning. In this article, we proceed to compare the performance of these two methods in the estimation of plot-level forest variables. Dense point clouds extracted from aerial frame images were used to estimate the plot-level forest variables needed in a forest inventory covering 89 plots. We analyzed images with 60% and 80% forward overlaps and used test plots with off-nadir angles of between 0° and 20°. When compared to reference ground measurements, the airborne laser scanning (ALS) data proved to be the most accurate: it yielded root mean square error (RMSE) values of 6.55% for mean height, 11.42% for mean diameter, and 20.72% for volume. When we applied a forward overlap of 80%, the corresponding results from aerial images were 6.77% for mean height, 12.00% for mean diameter, and 22.62% for volume. A forward overlap of 60% resulted in slightly deteriorated RMSE values of 7.55% for mean height, 12.20% for mean diameter, and 22.77% for volume. According to our results, the use of higher forward overlap produced only slightly better results in the estimation of these forest variables. Additionally, we found that the estimation accuracy was not significantly impacted by the increase in the off-nadir angle. Our results confirmed that digital aerial photographs were about as accurate as ALS in forest resources estimation as long as a terrain model was available.  相似文献   

13.
The drainage network of a sixth-order tropical river basin, viz. Ithikkara river basin, was extracted from different sources such as Survey of India topographic maps (1: 50,000; TOPO) and digital elevation data of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) (30 m) and Shuttle Radar Topography Mapping Mission (SRTM) (90 m). Basin morphometric attributes were estimated to evaluate the accuracy of the digital elevation model (DEM)-derived drainage networks for hydrologic applications as well as terrain characterization. The stream networks derived from ASTER and SRTM DEMs show significant agreement (with slight overestimation of lower order streams) with that of TOPO. The study suggests that SRTM (despite the coarser spatial resolution) provides better results, in drainage delineation and basin morphometry, compared to ASTER. Further, the variability of basin morphometry among the data sources might be attributed to spatial variation of elevation, raster grid size and vertical accuracy of the DEMs as well as incapability of the surface hydrologic analysis functions in the GIS platform.  相似文献   

14.
Glaciers have a high impact in the socio-economic sectors including water supply, energy production, flood and avalanches. A high precision digital elevation model (DEM) is required to monitor glaciers and to study various glacier processes. The present study deals with the qualitative and quantitative evaluation of the DEM generated from the bistatic TanDEM-X data by comparing it with GPS, Ice, Cloud, and land Elevation Satellite (ICESat) data and standard global DEMs such as Shuttle Radar Topography Mission (SRTM) and Advanced Space-borne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM). The study area consists of highly undulating glaciated terrain in western Himalaya, India. The results reveal that TanDEM-X is slightly better than SRTM both qualitatively and quantitatively, whereas ASTER GDEM showing maximum discrepancy among the three DEMs. The Root Mean Square Error (RMSE) of the TanDEM-X DEM with respect to GPS is 3.5 m at lower relief and 11.9 m at glaciated terrain, against 6.7 and 12.5 m for SRTM and 9.3 and 19.8 m for ASTER GDEM, respectively, for the same sites. On an average, for the whole study area, the RMSE of TanDEM-X is 7.9 m, SRTM is 9.3 m and ASTER GDM is 14.2 m. The RMSE of TanDEM-X, SRTM and ASTER GDEM with respect to ICESat are 16.3, 19.9 and 101.1 m, respectively. It is evident from the analysis that though SRTM is closer to TanDEM-X in terms of accuracy in the mountainous terrain, however, TanDEM-X will be more useful for studying glacier dynamics and topography.  相似文献   

15.
Accurate forest biomass mapping methods would provide the means for e.g. detecting bioenergy potential, biofuel and forest-bound carbon. The demand for practical biomass mapping methods at all forest levels is growing worldwide, and viable options are being developed. Airborne laser scanning (ALS) is a promising forest biomass mapping technique, due to its capability of measuring the three-dimensional forest vegetation structure. The objective of the study was to develop new methods for tree-level biomass estimation using metrics derived from ALS point clouds and to compare the results with field references collected using destructive sampling and with existing biomass models. The study area was located in Evo, southern Finland. ALS data was collected in 2009 with pulse density equalling approximately 10 pulses/m2. Linear models were developed for the following tree biomass components: total, stem wood, living branch and total canopy biomass. ALS-derived geometric and statistical point metrics were used as explanatory variables when creating the models. The total and stem biomass root mean square error per cents equalled 26.3% and 28.4% for Scots pine (Pinus sylvestris L.), and 36.8% and 27.6% for Norway spruce (Picea abies (L.) H. Karst.), respectively. The results showed that higher estimation accuracy for all biomass components can be achieved with models created in this study compared to existing allometric biomass models when ALS-derived height and diameter were used as input parameters. Best results were achieved when adding field-measured diameter and height as inputs in the existing biomass models. The only exceptions to this were the canopy and living branch biomass estimations for spruce. The achieved results are encouraging for the use of ALS-derived metrics in biomass mapping and for further development of the models.  相似文献   

16.
Digital Elevation Model (DEM) is a quantitative representation of terrain and is important for Earth science and hydrological applications. DEM can be generated using photogrammetry, interferometry, ground and laser surveying and other techniques. Some of the DEMs such as ASTER, SRTM, and GTOPO 30 are freely available open source products. Each DEM contains intrinsic errors due to primary data acquisition technology and processing methodology in relation with a particular terrain and land cover type. The accuracy of these datasets is often unknown and is non-uniform within each dataset. In this study we evaluate open source DEMs (ASTER and SRTM) and their derived attributes using high postings Cartosat DEM and Survey of India (SOI) height information. It was found that representation of terrain characteristics is affected in the coarse postings DEM. The overall vertical accuracy shows RMS error of 12.62 m and 17.76 m for ASTER and SRTM DEM respectively, when compared with Cartosat DEM. The slope and drainage network delineation are also violated. The terrain morphology strongly influences the DEM accuracy. These results can be highly useful for researchers using such products in various modeling exercises.  相似文献   

17.
The TopoSys laser scanner system is designed to produce digital elevation models (DEMs) at a maximum accuracy of 0.5 m in x and y and 0.1 m in z. The regular scan pattern and the measurement frequency of 80 000 measurements per second (on average 5 measurements per m2) form the basis for high quality DEMs.
The mainly automated data processing makes it possible to generate DEMs of large areas in a short production time. The DEMs produced come into common use as basic data for different applications, some of which are water resources management, shoreline control, planning of utility lines and urban planning (simulation of noise and pollution distributions). The performance of the system is illustrated with the help of DEM sections produced with the TopoSys system.  相似文献   

18.
Si Chen  Zhi Huang 《GPS Solutions》2017,21(3):1049-1058
The three-dimensional global morphology and seasonal characteristics of the ionospheric scintillation index of the F-layer between 150 and 550 km altitudes are analyzed using the GPS radio occultation measurements from the Constellation Observing System for Meteorology, Ionosphere and Climate during the 7-year period of low and high sunspot activity from 2007 to 2013. The results show that the prominent scintillation intensity, which is confined within ±30° geomagnetic latitude, starts at post-sunset, reaches a maximum at around pre-midnight, and often persists until postmidnight. Moderate scintillation activity can be observed in the high-latitude region almost at any time, whereas weak scintillation prevails in the midlatitude region. The noticeable scintillation peak near midnight occurs at an altitude of approximately 250 km in most cases. However, the peak of the scintillation activity during the solar maximum extends to higher altitudes than observed during the solar minimum. Additionally, the local variation in time and altitude of the scintillation intensity is closely correlated with ionospheric HmF2. Statistical analysis indicates that an increase in solar activity or geomagnetic activity enhances the occurrence rate of scintillation and results in intense scintillation. The current research is beneficial for directly studying global ionospheric irregularities at GHz frequency based on high-rate L1 data and constructing a global scintillation model.  相似文献   

19.
Digital elevation models (DEMs) are essential to various applications in topography, geomorphology, hydrology, and ecology. The Shuttle Radar Topographic Mission (SRTM) DEM data set is one of the most complete and most widely used DEM data sets; it provides accurate information on elevations over bare land areas. However, the accuracy of SRTM data over vegetated mountain areas is relatively low as a result of the high relief and the penetration limitation of the C-band used for obtaining global DEM products. The objective of this study is to assess the performance of SRTM DEMs and correct them over vegetated mountain areas with small-footprint airborne Light Detection and Ranging (Lidar) data, which can develop elevation products and vegetation products [e.g., vegetation height, Leaf Area Index (LAI)] of high accuracy. The assessing results show that SRTM elevations are systematically higher than those of the actual land surfaces over vegetated mountain areas. The mean difference between SRTM DEM and Lidar DEM increases with vegetation height, whereas the standard deviation of the difference increases with slope. To improve the accuracy of SRTM DEM over vegetated mountain areas, a regression model between the SRTM elevation bias and vegetation height, LAI, and slope was developed based on one control site. Without changing any coefficients, this model was proved to be applicable in all the nine study sites, which have various topography and vegetation conditions. The mean bias of the corrected SRTM DEM at the nine study sites using this model (absolute value) is 89% smaller than that of the original SRTM DEM, and the standard deviation of the corrected SRTM elevation bias is 11% smaller.  相似文献   

20.
Accuracy assessment of GDEM,SRTM, and DLR-SRTM in Northeastern China   总被引：1，自引：0，他引：1  
This paper compares the accuracy of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Digital Elevation Model (GDEM), Shuttle Radar Topography Mission (SRTM) C-band and German Aerospace Centre (DLR)-SRTM X-band digital elevation models (DEMs) with the Ziyuan 3 (ZY-3) stereoscopic DEM and ground control points (GCPs). To date, the horizontal error of these DEMs has received little attention in accuracy assessments. Using the ZY-3 DEM as reference, this study examines (1) the horizontal offset between the three DEMs and the reference DEM using the normalised cross-correlation method, (2) the vertical accuracy of those DEMs using kinematic GPS data and (3) the relationship between the three DEMs and the reference ZY-3 DEM. The results show that the SRTM and DLR-SRTM have greater vertical accuracy after applying horizontal offset correction, whereas the vertical accuracy of the ASTER GDEM is less than the other two DEMs. These methods and results can be useful for researchers who use DEMs for various applications.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号