共查询到20条相似文献，搜索用时 31 毫秒
1.
Loudi Yap Ludovic Houetchak Kandé Robert Nouayou Nasser Abdou Ngouh Marie Brigitte Makuate 《International Journal of Digital Earth》2019,12(5):500-524
Digital Elevation Models (DEMs) contain topographic relief data that are vital for many geoscience applications. This study relies on the vertical accuracy of publicly available latest high-resolution (30?m) global DEMs over Cameroon. These models are (1) the ALOS World 3D-30?m (AW3D30), (2) the Shuttle Radar Topography Mission 1 Arc-Second C-Band Global DEM (SRTM 1) and (3) the Advanced Spaceborne Thermal Emission and Reflection Global DEM Version 2 (ASTER GDEM 2). After matching their coordinate systems and datums, the horizontal positional accuracy evaluation was carried out and it shows that geolocation errors significantly influence the vertical accuracy of global DEMs. After this, the three models are compared among them, in order to access random and systematic effects in the elevation data each of them contains. Further, heights from 555 GPS/leveling points distributed all over Cameroon are compared to each DEM, for their vertical accuracy determination. Traditional and robust statistical measures, normality test, outlier detection and removal were used to describe the vertical quality of the DEMs. The test of the normality rejected the hypothesis of normal distribution for all tested global DEMs. Overall vertical accuracies obtained for the three models after georeferencing and gross error removal in terms of Root Mean Square (RMS) and Normalized Median Absolute Deviation (NMAD) are: AW3D30 (13.06?m and 7.75?m), SRTM 1 (13.25?m and 7.41?m) and ASTER GDEM 2 (18.87?m and 13.30?m). Other accuracy measures (MED, 68.3% quantile, 95% quantile) supply some evidence of the good quality of AW3D30 over Cameroon. Further, the effect of land cover and slope on DEM vertical accuracy was also analyzed. All models have proved to be worse in the areas dominated by forests and shrubs areas. SRTM 1 and AW3D30 are more resilient to the effects of the scattering objects respectively in forests and cultivated areas. The dependency of DEMs accuracy on the terrain roughness is evident. In all slope intervals, AW3D30 is performing better than SRTM 1 and ASTER GDEM 2 over Cameroon. AW3D30 is more representative of the external topography over Cameroon in comparison with two others datasets and SRTM 1 can be a serious alternative to AW3D30 for a range of DEM applications in Cameroon. 相似文献
2.
Xiaoping Du Huadong Guo Xiangtao Fan Junjie Zhu Zhenzhen Yan Qin Zhan 《International Journal of Digital Earth》2016,9(3):252-271
The frequency of coastal flood damages is expected to increase significantly during the twenty-first century as sea level rises in the coastal floodplain. Coastal digital elevation model (DEM) data describing coastal topography are essential for assessing future flood-related damages and understanding the impacts of sea-level rise. The Shuttle Radar Topography Mission (SRTM) and Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM) are currently the most accurate and freely available DEM data. However, an accuracy assessment specifically targeted at DEMs over low elevation coastal plains is lacking. The present study focuses on these areas to assess the vertical accuracy of SRTM and ASTER GDEM using Ice, Cloud, and land Elevation Satellite, Geoscience Laser Altimeter System (ICESat/GLAS) and Real Time Kinematic (RTK) Global Positioning System (GPS) field survey data. The findings show that DEM accuracy is much better than the mission specifications over coastal plains. In addition, optical remote sensing image analysis further reveals the relationship between DEM vertical accuracy and land cover in these areas. This study provides a systematic approach to assess the accuracy of DEMs in coastal zones, and the results highlight the limitations and potential of these DEMs in coastal applications. 相似文献
3.
Pratima Pandey Surendar Manickam Avik Bhattacharya AL. Ramanathan Gulab Singh G. Venkataraman 《国际地球制图》2017,32(4):442-454
Glaciers have a high impact in the socio-economic sectors including water supply, energy production, flood and avalanches. A high precision digital elevation model (DEM) is required to monitor glaciers and to study various glacier processes. The present study deals with the qualitative and quantitative evaluation of the DEM generated from the bistatic TanDEM-X data by comparing it with GPS, Ice, Cloud, and land Elevation Satellite (ICESat) data and standard global DEMs such as Shuttle Radar Topography Mission (SRTM) and Advanced Space-borne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM). The study area consists of highly undulating glaciated terrain in western Himalaya, India. The results reveal that TanDEM-X is slightly better than SRTM both qualitatively and quantitatively, whereas ASTER GDEM showing maximum discrepancy among the three DEMs. The Root Mean Square Error (RMSE) of the TanDEM-X DEM with respect to GPS is 3.5 m at lower relief and 11.9 m at glaciated terrain, against 6.7 and 12.5 m for SRTM and 9.3 and 19.8 m for ASTER GDEM, respectively, for the same sites. On an average, for the whole study area, the RMSE of TanDEM-X is 7.9 m, SRTM is 9.3 m and ASTER GDM is 14.2 m. The RMSE of TanDEM-X, SRTM and ASTER GDEM with respect to ICESat are 16.3, 19.9 and 101.1 m, respectively. It is evident from the analysis that though SRTM is closer to TanDEM-X in terms of accuracy in the mountainous terrain, however, TanDEM-X will be more useful for studying glacier dynamics and topography. 相似文献
4.
ASTER GDEM与SRTM3高程差异影响因素分析 总被引：3，自引：0，他引：3
作为最新发布的全球地形数据,ASTER GDEM比目前常用的SRTM3数据有着更高的分辨率和更广的覆盖范围,对于相关地学分析具有重要意义。本文以华中地区为研究区域,对ASTER GDEM与SRTM3数据进行了比较,重点分析了坡度、坡向、地形起伏度、土地利用类型、植被覆盖度、生成ASTER GDEM栅格点高程数据所用的ASTER DEM影像数等因素对2种DEM数据高程差异的影响。结果表明,在研究区域内,ASTER GDEM高程比SRTM3高程平均低5.42 m,两种DEM数据高程差异的RMS值为16.90 m;ASTER GDEM与SRTM3之间的高程差异随着坡度、地形起伏度、植被覆盖度的增大而增大,而ASTER DEM影像数越大,高程差异越小;坡向、土地利用类型对高程差异也有影响。 相似文献
5.
在无控制点的卫星影像正射校正中,大多采用DSM/DEM数据作为辅助数据来消除或限制因地形起伏引起的形变,然而经不同格网密度的DSM/DEM正射校正后的影像对后续处理会产生不同程度的影响,如对地物分类精度产生影响。针对这一问题,本文分别采用不同的DSM/DEM数据(China DSM 15 m、ASTER GDEM 30 m和SRTM 90 m)对资源三号影像进行正射校正,然后对正射校正后影像利用支持向量机进行分类,比较正射校正后影像结果的分类精度。结果表明:在相同重采样方法下,影像经China DSM 15 m DSM正射校正后结果的分类精度优于ASTER GDEM 30 m DEM和SRTM 90 m DEM。 相似文献
6.
Digital elevation model (DEM) data of Shuttle Radar Topography Mission (SRTM) are distributed at a horizontal resolution of 90 m (30 m only for US) for the world, Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) DEM data provide 30 m horizontal resolution, while CARTOSAT-1 (IRS-P5) gives 2.6 m horizontal resolution for global coverage. SRTM and ASTER data are available freely but 2.6 m CARTOSAT-1 data are costly. Hence, through this study, we found out a horizontal accuracy for selected ground control points (GCPs) from SRTM and ASTER with respect to CARTOSAT-1 DEM to implement this result (observed from horizontal accuracy) for those areas where the 2.6-m horizontal resolution data are not available. In addition to this, the present study helps in providing a benchmark against which the future DEM products (with horizontal resolution less than CARTOSAT-1) with respect to CARTOSAT-1 DEM can be evaluated. The original SRTM image contained voids that were represented digitally as ?140; such voids were initially filled using the measured values of elevation for obtaining accurate DEM. Horizontal accuracy analysis between SRTM- and ASTER-derived DEMs with respect to CARTOSAT-1 (IRS-P5) DEM allowed a qualitative assessment of the horizontal component of the error, and the appropriable statistical measures were used to estimate their horizontal accuracies. The horizontal accuracy for ASTER and SRTM DEM with respect to CARTOSAT-1 were evaluated using the root mean square error (RMSE) and relative root mean square error (R-RMSE). The results from this study revealed that the average RMSE of 20 selected GCPs was 2.17 for SRTM and 2.817 for ASTER, which are also validated using R-RMSE test which proves that SRTM data have good horizontal accuracy than ASTER with respect to CARTOSAT-1 because the average R-RMSE of 20 GCPs was 3.7 × 10?4 and 5.3 × 10?4 for SRTM and ASTER, respectively. 相似文献
7.
本文侧重于介绍智能化摄影测量机器学习的高差拟合神经网络方法。观测手段和处理方式等限制导致全球高质量无缝DEM数据的缺乏,进而制约了它在水文、地质、气象及军事等领域的应用。本文提出了一种基于高差拟合神经网络的多源DEM融合方法,尝试融合全球DEM产品SRTM1、ASTER GDEM v2和激光雷达测高数据ICESat GLAS。首先,根据ICESat GLAS的相关参数及与DEM数据的高程差值,结合坡度自适应的思想设置高差阈值对ICESat GLAS进行滤波,剔除异常数据点。然后,以ICESat GLAS数据为控制点,利用神经网络模型拟合ASTER GDEM v2的误差分布。以地形坡度信息和经纬度坐标作为网络输入,ICESat GLAS和ASTER GDEM v2的高程差值作为目标输出,训练得到预测高差,将其与ASTER GDEM v2高程值相加即可获得校正结果。最后,引入TIN差分曲面的方法,利用校正后的ASTER GDEM v2高程值对SRTM1的数据空洞进行填充,融合生成空间无缝DEM。本文通过随机选取数据进行真实试验,对模型进行了精度验证,并给出了处理结果的定量评价和目视效果。结果表明,不论是空洞还是整体区域,本文方法相比其他DEM数据集和其他方法的处理结果都能够在RMSE上表现出优势,同时,本文提出的方法能够有效克服ASTER GDEM中异常值的影响,得到空间无缝DEM。 相似文献
8.
作为"云控制"摄影测量理论和方法的发展,研究了DEM约束的立体卫星影像区域网平差方法。与DEM仅作为高程控制信息使用,或者是通过DEM表面匹配实现绝对定向的间接定位方法不同,DEM作为平高控制信息被直接引入至基于RFM模型的卫星影像区域网平差之中。本文方法将连接点地面高程与DEM格网内插高程之差作为虚拟观测值构建约束方程,不仅利用了DEM高程信息,并且利用了其地形曲面包含的平面信息,以"云控制"方式在区域网平差过程中有效消除卫星影像RPC参数中包含的整体偏移及区域网内部的扭曲变形,实现了无地面控制点条件下卫星影像平面及高程绝对定位精度的大幅提升。使用覆盖山东全境的330景天绘一号立体卫星影像进行试验,分别以AW3D30、ASTER GDEM和SRTM GL3共3种开源DEM作为控制信息,并使用100个外业实测控制点进行精度评测。试验表明,以DEM作为控制可显著提高区域网平差的平面与高程精度,卫星影像绝对定位精度与DEM自身精度有关。当使用AW3D30作为控制时,可以取得与使用100个外业控制点平差同等精度,平面中误差为5.0 m(约1像素),高程中误差为2.9 m。试验结果证明了DEM替代外业控制点作为平差控制信息的有效性与可行性。 相似文献
9.
Digital Elevation Model (DEM) is a quantitative representation of terrain and is important for Earth science and hydrological applications. DEM can be generated using photogrammetry, interferometry, ground and laser surveying and other techniques. Some of the DEMs such as ASTER, SRTM, and GTOPO 30 are freely available open source products. Each DEM contains intrinsic errors due to primary data acquisition technology and processing methodology in relation with a particular terrain and land cover type. The accuracy of these datasets is often unknown and is non-uniform within each dataset. In this study we evaluate open source DEMs (ASTER and SRTM) and their derived attributes using high postings Cartosat DEM and Survey of India (SOI) height information. It was found that representation of terrain characteristics is affected in the coarse postings DEM. The overall vertical accuracy shows RMS error of 12.62 m and 17.76 m for ASTER and SRTM DEM respectively, when compared with Cartosat DEM. The slope and drainage network delineation are also violated. The terrain morphology strongly influences the DEM accuracy. These results can be highly useful for researchers using such products in various modeling exercises. 相似文献
10.
SRTM、ASTER GDEM和AW3D是比较有代表性的全球数字高程模型。本文探讨了采用车载动态PPP技术对上述3类模型的区域高程精度进行检核,首先沿广州至肇庆公路进行连续数据采集,采用动态精密单点定位（PPP）技术解算动态点的WGS-84坐标;然后利用EGM2008重力场模型和仪器高获得动态点的正常高;最后采用4种不同的插值方法对SRTM、ASTER GDEM和AW3D模型进行高程检验。检核结果显示：不同的插值方法具有较好的一致性,SRTM3 V4.1、ASTER GDEM V2、AW3D30的高程标准差分别优于3.4 m、4.1 m和3.3 m,均优于其全球标称高程精度;本文检核方法快速高效,有较好的适用性。 相似文献
11.
This study reports results from evaluation of the quality of digital elevation model (DEM) from four sources viz. topographic map (1:50,000), Shuttle Radar Topographic Mission (SRTM) (90 m), optical stereo pair from ASTER (15 m) and CARTOSAT (2.5 m) and their use in derivation of hydrological response units (HRUs) in Sitla Rao watershed (North India). The HRUs were derived using water storage capacity and slope to produce surface runoff zones. The DEMs were evaluated on elevation accuracy and representation of morphometric features. The DEM derived from optical stereo pairs (ASTER and CARTOSAT) provided higher vertical accuracies than the SRTM and topographic map-based DEM. The SRTM with a coarse resolution of 90 m provided vertical accuracy but better morphometry compared to topographic map. The HRU maps derived from the fine resolution DEM (ASTER and CARTOSAT) were more detailed but did not provide much advantage for hydrological studies at the scale of Sitla Rao watershed (5800 ha). 相似文献
12.
13.
The drainage network of a sixth-order tropical river basin, viz. Ithikkara river basin, was extracted from different sources such as Survey of India topographic maps (1: 50,000; TOPO) and digital elevation data of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) (30 m) and Shuttle Radar Topography Mapping Mission (SRTM) (90 m). Basin morphometric attributes were estimated to evaluate the accuracy of the digital elevation model (DEM)-derived drainage networks for hydrologic applications as well as terrain characterization. The stream networks derived from ASTER and SRTM DEMs show significant agreement (with slight overestimation of lower order streams) with that of TOPO. The study suggests that SRTM (despite the coarser spatial resolution) provides better results, in drainage delineation and basin morphometry, compared to ASTER. Further, the variability of basin morphometry among the data sources might be attributed to spatial variation of elevation, raster grid size and vertical accuracy of the DEMs as well as incapability of the surface hydrologic analysis functions in the GIS platform. 相似文献
14.
作为我国首颗民用立体测绘卫星数据产品,ZY-3 DSM对于我国地学分析具有极其重要的作用。本文在顾及地貌情况前提下,选取云南省高海拔山区为试验区,辅以1∶10 000野外实测地形图DEM为参考值,将分辨率为15 m的ZY-3 DSM与90 m的SRTM DEM从高程精度和地形精度进行较为全面的数据质量比较。结果表明:ZY-3 DSM在高程精度和地形精度均有更好的表现。总体看来,ZY-3 DSM数据质量更高,具有更广泛的利用价值。 相似文献
15.
由于数据获取与后期处理方式不同,先进星载热发射和反射辐射仪全球数字高程模型(advanced spaceborne thermalemissionandreflectionradiometerglobaldigitalelevationmodel,ASTERGDEM)和航天飞机雷达地形测绘任务(shuttle radar topography mission,SRTM)数据在高程精度上存在差异,采用弹性反馈（resilient backpropagation,RProp）神经网络算法对二者进行融合处理,实现优势互补以提升高程精度。选取两个黄土丘陵沟壑地貌样区分别用于模型建立与效果验证,1∶10 000高程精度为参考数据,在建模样区应用RProp神经网络算法构建ASTER GDEM高程校正模型、SRTM1高程校正模型、ASTER GDEM与SRTM1高程融合模型,同时应用误差反向传播(back propagation,BP)神经网络建立ASTER GDEM与SRTM1高程融合模型,将这些模型的高程精度优化效果进行对比,并在验证样区检验RProp融合模型的可行性。结果表明,RProp融合模... 相似文献
16.
The Digital Elevation Model (DEM) is one of the important parameters of soil erosion assessment and notable uncertainties are found in using different resolutions of the DEM. Revised Universal Soil Loss Equation model has been applied to analyze the effect of open-source DEMs with different resolution and accuracy on the uncertainties of soil erosion modelling in a part of the Narmada river basin in Madhya Pradesh in central India. Selected open-source DEMs are GTOPO30 (1 km), SRTM (30 and 90 m), CARTOSAT (30 m) and ASTER (30 m), used for estimating erosion rate. Results with better accuracy are achieved with the high-resolution DEMs (30 m) with higher vertical accuracy than the coarse resolution DEMs with lower accuracy. This study has presented potential uncertainties introduced by the open-source DEMs in soil erosion modelling for better understanding of appropriate selection and acceptable errors for researchers. 相似文献
17.
在地形起伏较大的山区用干涉SAR生成DEM时,合适的入射角是获取高精度DEM的重要参数之一.本文基于ENVISAT/ASAR多角度干涉雷达数据,SRTM 90米分辨率的DEM以及1:5万的数字化DEM数据,从定性和定量的角度比较和分析了干涉SAR在获取山区DEM时,入射角对DEM精度的具体影响.结果表明:对于ASAR的多入射角干涉雷达数据,在不同入射角条件下由于雷达叠掩和透视收缩的影响,获取的DEM精度差别很大,入射角带来的影响相当显著,比如IS2和IS4角度得到的DEM的精度差超过了6米.因此,在山区干涉SAR地形成图时,必须对入射角的大小进行严格的选择. 相似文献
18.
针对数字高程模型数据源不同会带来一定的不确定性和差异性的问题,选取德国某露天矿为实验区,以高精度DEM数据TanDEM-X为参照,对比了SRTM、AW3D30、ASTER GDEM与TanDEM-X数据的高程精度,分析了DEM数据的差异。结果表明:(1)露天矿区的开采和复垦活动明显地体现在了不同时期获取的DEM高程变化中;(2)在非采矿区,不同DEM数据之间具有较好的一致性,TanDEM-X数据与其他数据的高差均方根误差分别为2.64 m、5.88 m、2.99 m;(3)DEM空间分辨率越高提取得到坡度最值越大,地形描述准确性越高。研究结果为露天矿区DEM应用提供参考。 相似文献
19.
为探究ASTER GDEMV3、SRTM1 DEM和AW3D30 DEM 3种开源DEM数据的高程精度,本文以高精度ICESat-2 ATLAS测高数据为参考数据,利用GIS统计分析、误差相关分析及数理统计对DEM的高程精度进行对比评价。结果表明：①AW3D30的质量最稳定;SRTM1 DEM在平原精度最高;在高原山地精度由高到低依次为AW3D30 DEM、ASTER GDEMV3、SRTM1 DEM。②DEM数据高程精度受地表覆盖影响较大,且与地形因素密切相关,在相同地表覆盖的两个研究区中DEM数据高程精度表现情况不一致,SRTM在平原地表覆盖下精度表现最好,平均误差为3.15 m,AW3D30 DEM在山地地表覆盖下精度表现最好,平均误差为7.61 m。③坡度对DEM数据的高程精度影响较大,在两个研究区3种DEM数据的高程误差均随坡度的增加而增加;坡向对DEM数据的高程精度影响较小,未发现明显的规律。 相似文献
20.
Topographic corrections of synthetic aperture radar (SAR) images over hilly regions are vital for retrieval of correct backscatter values associated with natural targets. The coarse resolution external digital elevation models (DEM) available for topographic corrections of high resolution SAR images often result into degradation of spatial resolution or improper estimation of backscatter values in SAR images. Also, many a times the external DEMs do not spatially co-register well with the SAR data. The present study showcases the methodology and results of topographic correction of ALOS-PALSAR image using high resolution DEM generated from the same data. High resolution DEMs of Jaipur region, India were generated using multiple pair SAR images acquired from ALOS-PALSAR using interferometric (InSAR) techniques. The DEMs were validated using differential global positioning system measured elevation values as ground control points and were compared with photogrammetric DEM (advanced spaceborne thermal emission and reflection radiometer – ASTER) and SRTM (Shuttle Radar Topography Mission) DEM. It was observed that ALOS-PALSAR images with optimum baseline parameters produced high resolution DEM with better height accuracy. Finally, the validated DEM was used for topographic correction of ALOS-PALSAR images of the same region and were found to produce better result as compared with ASTER and SRTM-DEM. 相似文献