易门式大型铜矿床构造成矿动力学模型   总被引：5，自引：1，他引：5  

韩润生  刘丛强  马德云  王红才  马更生 《地质科学》2003,38(2):200-213

针对金属矿床隐伏矿定位预测的关键问题,在提出构造成矿动力学的分支学术方向的基础上,以易门式大型铜矿床为例,从成矿地质背景、矿田构造、构造地球化学和成矿构造应力场等方面进行构造成矿动力学研究,阐述在构造应力场控制下成矿流体运移和聚集的规律。构造地球化学研究认为,构造地球化学异常反映矿体的原生晕;构造地球化学异常受构造控制,其分带特征可指示成矿流体的流向,并提供矿床成因和隐伏矿(化)体相对埋深的信息。构造应力场的控矿特征主要表现在:构造应力场导致控矿构造的形成,并驱动成矿流体的运移;构造应力场控制了成矿能量场;应力和能量的高值集中区分布特点可反映某些构造型式。在此基础上建立构造成矿动力学模型,概括隐伏矿成矿预测准则,据此提出若干重点找矿靶区和靶位,其中部分靶区得到工程验证,表明构造成矿动力学方法对隐伏矿定位预测和评价具有重要的指导意义。  相似文献   

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel     

Ian J. Walker  William G. Nickling 《地球表面变化过程与地形》2003,28(10):1111-1124

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Mathematical Definitions of Operators for Cartographic Generalization     

王晓妮  张洁等 《地球空间信息科学学报》2003,6(1):70-73

  相似文献   

磷脂脂肪酸在地下水微生物生态学中的应用及存在的若干问题   总被引：6，自引：0，他引：6  

潘响亮  邓伟  张道勇 《地理科学》2003,23(6):740-745

磷脂脂肪酸(PLFA)是研究地下水微生物生态的一种新兴技术，它比基于培养基的传统方法有许多明显的优势，但同时也存在一些需要解决的问题。样品中的PLFA总量可以通过转换因子估算地下水微生物的生物量，但微生物群落组成的差异和环境的物理变化都是潜在的误差来源，以传统微生物技术互补和选择合适的转换因子可提高结果的可靠性；PLFA还可以被用来指示地下水微生物在各种环境压力下的生理状态；用特定的PLFA生物标志物、PLFA的组成模式、指纹技术来描述地下水微生物的群落结构和变化特征时，存在的主要问题是不同微生物PLFA的重叠、背景值的干扰和环境因子变化的影响，以PLFA技术为主导，借助于数学统计方法，结合传统微生物技术、核酸鉴定、同位素示踪等多种技术可望有效地消除各种干扰因子，从而揭示完整的地下水微生物的生理生态，为地下水污染的生物修复提供理论指导。  相似文献   

2-D deformation analysis of a half-space due to a long dip-slip fault at finite depth     

Sushil K. Tomar  Naresh K. Dhiman 《Journal of Earth System Science》2003,112(4):587-596

Closed form analytical expressions of stresses and displacements at any field point due to a very long dip-slip fault of finite width buried in a homogeneous, isotropic elastic half-space, are presented. Airy stress function is used to derive the expressions of stresses and displacements which depend on the dip angle and depth of the upper edge of the fault. The effect of dip angle and depth of the upper edge of the fault on stresses and displacements is studied numerically and the results obtained are presented graphically. Contour maps for stresses and displacements are also presented. The results of Rani and Singh (1992b) and Freund and Barnett (1976) have been reproduced.  相似文献   

APPLICATION OF SOME MECHANICAL CONCEPTS TO STRUCTURAL GEOLOGY     

WUHongling WANGWei 《大地构造与成矿学(英文版)》2003,27(1):120-129

This paper discusses some mechanical concepts that have been largely applied to structural geology and tectonics, and addresses the problems and misunderstandings in use of these mechanical terms. The purpose is to stimulate the interests for structural geologists in using the mechanical principles and methods correctly to solve the geodynamic problems.  相似文献   

The tectonic regime in Italy inferred from borehole breakout data     

Maria Teresa Mariucci  Birgit Müller   《Tectonophysics》2003,361(1-2):21-35

In Italy, the horizontal stress directions are well constrained in many regions, but the tectonic regime is not well known because the stress magnitudes are unknown. Our intention is to improve the knowledge of crustal stress in Italy, both at shallow depth and in low seismicity areas. Therefore, we inferred the tectonic regime from the comparison between the depth of breakout occurrence and the physical properties of the rocks in 20 boreholes. The critical value of the maximum horizontal stress, for which the effective tangential stress at the borehole wall overcomes the rock strength to form breakouts, could be computed from rock strength and density. Comparing the theoretical stress distributions for different tectonic regimes with the depth distribution of breakout occurrence, it is possible to infer the tectonic regime that fits best to the breakout depth distribution. We investigated boreholes up to 6 km deep located in different tectonic environments over the Italian peninsula: the Po Plain, the Apenninic chain, the Adriatic foredeep and the Tyrrhenian Quaternary volcanic region. These wells are characterised by breakout data of good quality (A, B and C, according to World Stress Map quality ranking system). The results are in general agreement with the style of faulting derived from earthquake focal mechanisms and other stress indicators. Our results show a predominance of a normal faulting (NF) regime in the inner Apennines and both normal faulting and strike–slip faulting (SS) style in the surrounding regions, possibly also associated with changes in the tectonic regime with depth.  相似文献   

岩质边坡稳定性分析的探讨   总被引：2，自引：0，他引：2  

张飞  池秀文 《岩土力学》2003,(Z2)

通过最大剪应力等值线来确定边坡的滑动面,并与其结构面抗剪强度相比较,给出了确定边坡的稳定系数的方法。  相似文献   

风应力对SST气候场和年际变率作用的诊断及数值研究     

李明  吴洪宝  高维英 《南京气象学院学报》2003,26(2):155-163

相关方法分析Nino3区SSTA和风应力的关系，发现前期风应力距平场与Nino3区SSTA有很好的相关关系，这种相关性超前8个月时就有所显现。影响Nino3区SSTA的主要风应力区域的位置随风应力超前的时间缩短均向中太平洋扩展。数值试验方法研究不同区域的风应力对热带太平洋SST作用的结果表明，强相关区域的风应力对形成和维持热带太平洋SST的气候场的作用不明显，而对SST的年际变率有重要贡献；相反，强相关区域以外的风应力对形成和维持热带太平洋SST的气候场起重要作用，但是对SST的年际变率所起的作用很不理想。  相似文献   

全球观测应力场的短波分量分析   总被引：3，自引：0，他引：3       下载免费PDF全文

黄玺瑛  魏东平  陈棋福  陈虹 《地震学报》2003,25(1):40-46

世界应力图(WSM，World Stress Map)计划的应力指标，目前已累积数据共计10 920个，这些应力指标代表了该地区最大水平主应力的实际观测方向；与此同时，可以假定全球各个板块的绝对运动方向表征了相应各板块的最大水平主应力方向的长波分量．根据应力场的叠加原理，得到由该地区局部构造运动等因素贡献的短波分量的相对大小和方向．将全球划分成2.52.5的基本单元，对每个单元的WSM数据进行加权统计分析，得到其平均应力观测取向，利用HS2-NUVEL1全球绝对板块运动模型计算应力场的长波分量；平均观测应力取向和长波分量取向之间的夹角，决定了相应短波分量相对于观测应力场的大小及其取向的范围，并反映了特定研究地区局部应力场对总应力场的贡献程度．本文的计算结果表明，全球板块的绝大部分地区及各板块的平均效果，长波分量与短波分量对观测应力场的贡献程度相当．对于某些大陆板块内部，局部构造活动对观测应力场的贡献起到重要作用，因而控制着地震的孕育与发生．   相似文献