IMD法在多光谱图像分类中的应用     

郑战辉张书华  朱述龙朱宝山 张艳 《测绘学院学报》2004,21(3):193-195

数学形态学着重于分析和处理图像的几何结构信息。根据这一原理，在图像分类预处理过程中，对各种地物区域的几何结构特点进行分析，构造相应的结构元素，然后对图像进行形态迭代分解法(IMD，Iterative Morphological Decompostion)变换。在变换结果中，地物区域的灰度信息进行了归一化处理，同时区域的几何结构特点和独立地物得到了有效保留。将多光谱图像的IMD变换结果进行分类实验的结果表明，该方法可以有效提高多光谱图像分类的精度和效率，具有较强的适用性。  相似文献   

Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam     

Jonathan D. Phillips  Michael C. Slattery  Zachary A. Musselman 《地球表面变化过程与地形》2005,30(11):1419-1439

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Relief-rejuvenation and topographic length scales in a fluvial drainage basin, Napf area, Central Switzerland   总被引：2，自引：2，他引：2  

Fritz Schlunegger  Heinz Schneider 《Geomorphology》2005,69(1-4):102-117

This paper explores how, and to what extent, a phase of relief-rejuvenation modifies the mode of surface erosion in an approximately 63 km² drainage basin located at the northern border of the Swiss Alps (Luzern area). In the study area, the retreat of the Alpine glaciers at the end of the Last Glacial Maximum (LGM) caused base level to lower by approximately 80 m. The fluvial system adapted to the lowered base level by headward erosion. This is indicated by knickzones in the longitudinal stream profiles and by the continuous upstream narrowing of the width of the valley floor towards these knickzones. In the headwaters above these knickzones, processes are still to a significant extent controlled by the higher base level of the LGM. There, frequent exposure of bedrock in channels and especially on hillslopes implies that sediment flux is to a large extent limited by weathering rates. In the knickzones, however, exposure of bedrock in channels implies that sediment flux is supply-limited, and that erosion rates are controlled by stream power.The morphometric analysis reveals the existence of length scales in the topography that result from distinct geomorphic processes. Along the tributaries where the upstream sizes of the drainage basins exceed 100,000–200,000 m², the mode of sediment transport and erosion changes from predominantly hillslope processes (i.e., landsliding, creep of regolith, rock avalanches and to some extent debris flows) to processes in channels (fluvial processes and debris flows). This length scale reflects the minimum size of the contributing area for channelized processes to take over in the geomorphic development (i.e., threshold size of drainage basin). This threshold size depends on the ratio between production rates of sediment on hillslopes, and export rates of sediment by processes in channels. Consequently, in the headwaters, erosion rates and sediment flux, and hence landscape evolution rates, are to a large extent limited by weathering processes. In contrast, in the lower portion of the drainage basin that adjusts to the lowered base-level, rates of channelized erosion and relief formation are controlled mainly by stream power. Hence, this paper shows that base-level lowering, headward erosion and establishment of knickzones separate drainage basins in two segments with different controls on rates of surface erosion, sediment flux and relief formation.  相似文献   

土钉与锚杆联合支护在深基坑工程中的应用     

方东 《地质科技情报》2005,24(Z1):62-64

结合深圳市星海阁办公楼的工程实例,从周边环境对深基坑支护的特殊要求及复杂的地质条件出发,论述了采用土钉与锚杆联合支护形式的依据.介绍了在深基坑支护施工中采取的具体措施后期效果.同时分析了这种联合支护结构形式的力学特点,通过将两者联合使用,可实现锚杆支护结构水平侧移小和土钉支护结构受力合理的优点.且土钉与锚杆联合支护,使得上部锚杆和中下部的土钉墙两者形成了统一的受力整体,共同抵抗荷载和变形.  相似文献   

锚杆支护及在高承压水土层基坑中的应用     

方东 《地质科技情报》2005,24(Z1):74-76

在邻海地区富含高承压水的土层中施工预应力锚杆支护工程的难度很大.介绍了锚杆的构造、作用机理、施工工艺以及决定锚杆施工质量的关键技术.以深圳某商住楼基坑施工为例,探讨了在承压水土层中采用锚杆支护的方法,创造性地提出了"先堵水后注浆"的施工工艺,可供沿海、沿江地区的类似工程借鉴.  相似文献   

Intensity of in‐lake processes in floodplain lakes within the Bug River zone of fluvial activity          下载免费PDF全文

Jarosław Dawidek  Beata Ferencz 《水文研究》2014,28(24):5965-5971

The paper presents a new approach to calculating the erosion and deposition values of floodplain lake basins, the erosion–deposition index (EDI). The EDI is a sum of the basin geometry indices (BGIs), which can be calculated for a separate cross section of the lake. The distribution of processes within the basin was investigated in two selected floodplain lakes with the use of BGIs. Field research was carried out in the Bug River valley from 1 November 2006 to 31 October 2011. The highest erosion was observed in the lakes located close to the parent river. Deposition processes were observed in lakes with high inflow of groundwater. The results showed that EDI values of 48 out of the 71 floodplain lakes ranged from ?0.2 to 0.2. Spatial distribution of erosion and deposition processes within the lake basins resulted from a velocity of water inflowing or flowing through the basin. This was observed especially in contrafluent–confluent lake. Inflow of rivers water via upstream crevasse occurred later than via downstream one, but energy of flowing water was higher, which favoured erosion of this part of the lake basin. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Variability in the vertical hyporheic water exchange affected by hydraulic conductivity and river morphology at a natural confluent meander bend          下载免费PDF全文

Jinxi Song  Guotao Zhang  Weize Wang  Qi Liu  Weiwei Jiang  Weiqiang Guo  Bin Tang  Haifeng Bai  Xinyi Dou 《水文研究》2017,31(19):3407-3420

River confluences and their associated tributaries are key morphodynamic nodes that play important roles in controlling hydraulic geometry and hyporheic water exchange in fluvial networks. However, the existing knowledge regarding hyporheic water exchange associated with river confluence morphology is relatively scarce. On January 14 and 15, 2016, the general hydraulic and morphological characteristics of the confluent meander bend (CMB) between the Juehe River and the Haohe River in the southern region of Xi'an City, Shaanxi Province, China, were investigated. The patterns and magnitudes of vertical hyporheic water exchange (VHWE) were estimated based on a one‐dimensional heat steady‐state model, whereas the sediment vertical hydraulic conductivity (K_v) was calculated via in situ permeameter tests. The results demonstrated that 6 hydrodynamic zones and their extensions were observed at the CMB during the test period. These zones were likely controlled by the obtuse junction angle and low momentum flux ratio, influencing the sediment grain size distribution of the CMB. The VHWE patterns at the test site during the test period mostly showed upwelling flow dominated by regional groundwater discharging into the river. The occurrence of longitudinal downwelling and upwelling patterns along the meander bend at the CMB was likely subjected to the comprehensive influences of the local sinuosity of the meander bend and regional groundwater discharge and finally formed regional and local flow paths. Additionally, in dominated upwelling areas, the change in VHWE magnitudes was nearly consistent with that in K_v values, and higher values of both variables generally occurred in erosional zones near the thalweg paths of the CMB, which were mostly made up of sand and gravel. This was potentially caused by the erosional and depositional processes subjected to confluence morphology. Furthermore, lower K_v values observed in downwelling areas at the CMB were attributed to sediment clogging caused by local downwelling flow. The confluence morphology and sediment K_v are thus likely the driving factors that cause local variations in the VHWE of fluvial systems.  相似文献   

Reconstructing fluvial bar surfaces from compound cross‐strata and the interpretation of bar accretion direction in large river deposits          下载免费PDF全文

Renato P. Almeida  Bernardo T. Freitas  Bruno B. Turra  Felipe T. Figueiredo  André Marconato  Liliane Janikian 《Sedimentology》2016,63(3):609-628

The interpretation of fluvial styles from the rock record is based for a significant part on the identification of different types of fluvial bars, characterized by the geometric relationship between structures indicative of palaeocurrent and surfaces interpreted as indicative of bar form and bar accretion direction. These surfaces of bar accretion are the boundaries of flood‐related bar increment elements, which are typically less abundant in outcrops than what would be desirable, particularly in large river deposits in which each flood mobilizes large volumes of sediment, causing flood‐increment boundary surfaces to be widely spaced. Cross‐strata set boundaries, on the other hand, are abundant and indirectly reflect the process of unit bar accretion, inclined due to the combined effect of the unit bar surface inclination and the individual bedform climbing angle, in turn controlled by changes in flow structure caused by local bar‐scale morphology. This work presents a new method to deduce the geometry of unit bar surfaces from measured pairs of cross‐strata and cross‐strata set boundaries. The method can be used in the absence of abundant flood‐increment bounding surfaces; the study of real cases shows that, for both downstream and laterally accreting bars, the reconstructed planes are very similar to measured bar increment surfaces.  相似文献   

乌南油田滨浅湖砂体储层构型及其油气意义          下载免费PDF全文

石金华  韩登林  于炳松  李仕远  王宝  陈景华 《地质科学》2016,(4):1310-1323

基于Miall储层构型研究思想,结合岩心、测井、测试等资料,对乌南油田砂坝砂体储层构型界面特征进行了研究,确定了储层构型界面识别标志;在此基础上,将砂坝内部构型分为坝主体和坝侧缘,同时通过动、静态结合,明确砂坝外部构型存在孤立、视连通、左侧向叠置和右侧向叠置4种模式;纵向上发育湖退（进积）和湖进（退积）两种砂体发育模式。坝主体是主力储层,具有良好油气显示;坝主体分布面积大、出现频率高为油气有利区域。  相似文献   

基于规则格网的DEM插值实验     

张一帆  王青山 《测绘工程》2016,25(2)

通过地形建模,将6个地形隶属函数按照101×101,112×112,126×126,144×144,168×168,201×201,257×257 7种格网密度生成6种局部地形单元的规则格网DEM;使用反距离加权(IDW)等7种插值算法,将前6种格网密度下的DEM插值成257×257规格;从原始257×257DEM中随机抽取检查点计算残差,并对残差中误差进行分析。通过分组插值实验,运用控制变量法、方差分析等方法研究地貌类型、采样密度和插值算法对DEM插值精度的影响。  相似文献