夏季通风气象指数预报     

赵娜  张德山  邓长菊  马小会  穆启占 《气象科技》2008,36(6):779-781

随着人们生活水平的提高,对室内污染越来越关注,应"中国室内环境监测委员会"提出的需求,通风气象指数于2006年6月首次向北京公众发布,文章就首先研发并投入业务使用的夏季通风指数给出了详细论述.通过对2005年夏季(6～8月)的各气象要素(气压、温、湿、风、能见度、天空状况等)资料共1790个数据做检验分析,最终选取体感温度为主要预报因子并综合考虑夏季特殊天气条件和风力以及污染的影响,得出夏季通风指数在一天中7个时段的预报公式,并划分出相应的指数等级.  相似文献   

沙尘气溶胶光学厚度的全球分布及分析   总被引：6，自引：1，他引：5  

马井会  张华  郑有飞  孙治安 《气候与环境研究》2007,12(2):156-164

利用全球气溶胶数据GADS(Global Aerosol Data Set)计算了冬夏两季4种类型(积聚型、核型、粗粒型和传输型)沙尘气溶胶0.55μm光学厚度的全球分布。通过分析得出,气溶胶的消光系数和垂直厚度对光学厚度的影响很大。全球沙尘气溶胶分布具有明显的季节和地理差异,4个沙尘暴多发区,分别位于北非、中亚地区、澳大利亚西部和北美西部。中亚地区冬季沙尘气溶胶强度和范围比夏季大,北美和澳大利亚地区则相反,冬季光学厚度最大值位于北非的中部地区,而夏季其最大值位于非洲北部靠近大西洋的地区。沙尘气溶胶对<8μm的辐射吸收作用很弱,散射能力较强;对于>8μm的辐射吸收能力很强,吸收带位主要于8~11μm范围内。  相似文献   

Forecasting the western Pacific subtropical high index during typhoon activity using a hybrid deep learning model     

Jianyin Zhou  Mingyang Sun  Jie Xiang  Jiping Guan  Huadong Du  Lei Zhou 《海洋学报(英文版)》2022,41(4):101-108

Seasonal location and intensity changes in the western Pacific subtropical high(WPSH) are important factors dominating the synoptic weather and the distribution and magnitude of precipitation in the rain belt over East Asia. Therefore, this article delves into the forecast of the western Pacific subtropical high index during typhoon activity by adopting a hybrid deep learning model. Firstly, the predictors, which are the inputs of the model, are analysed based on three characteristics: the first...  相似文献   

哈大齐工业走廊经济与环境协调发展评价指标体系——基于脆弱性视角的研究   总被引：1，自引：0，他引：1  

万鲁河  张茜  陈晓红 《地理研究》2012,31(9):1673-1684

采用聚类分析与方差分析相结合并借助碎石图的方法,并结合哈大齐工业走廊建设的特点,建立了包括经济和环境两大系统的一整套评价指标体系,在此基础上,构建了脆弱性评价模型及分级标准,并对哈大齐三个城市的经济与环境协调发展系统进行了评价。结果表明:(1)该指标体系构建方法较好的解决了指标在选取时的信息重叠和筛选后的指标存在片面性的问题;(2)哈大齐三个城市经济与环境协调发展系统综合脆弱性总体上随着城市的发展由重度脆弱逐渐过渡到轻度脆弱状态,且经济系统脆弱性基本好于环境系统脆弱性;(3)2007年,制约哈尔滨经济与环境协调发展系统脆弱性主要是环境治理指数,制约大庆和齐齐哈尔的主要是环境污染指数。  相似文献   

Assessing probability of surface manifestation of liquefaction at a given site in a given exposure time using CPTU     

C. Hsein Juang  Chih-Chieh Lu  Jin-Hung Hwang 《Engineering Geology》2009,104(3-4):223-231

This paper is a follow-up to a previous paper on the subject of liquefaction potential index (LPI), a parameter that is often used to characterize the potential for surface manifestation of liquefaction at a given site subjected to a given shaking level (represented by a pair of peak ground surface acceleration a_max and moment magnitude M_w). In the previous paper by Juang and his coworkers, the LPI was re-calibrated for a piezocone penetration test (CPTU) model, and a simplified model based on LPI was created for computing the conditional probability of surface manifestation of liquefaction (P_G). In this paper, the model for this conditional probability P_G is extended into a complete framework for assessing the probability of surface manifestation of liquefaction in a given exposure time at a given site subjected to all possible ground motions at all seismic hazard levels. This new framework is formulated and demonstrated with an example site in 10 different seismic regions in the United States.  相似文献   

A high‐resolution relative time scale for the Viséan Stage (Carboniferous) of the Kulm Basin (Rhenish Mountains,Germany)     

Dieter Korn  Bernd Kaufmann 《Geological Journal》2009,44(3):306-321

The Viséan (Carboniferous) sedimentary succession of the basinal Kulm facies (Rhenish Mountains) was investigated in detail in order to achieve a high‐resolution stratigraphic subdivision and correlation. Additionally, the ranges of fossil index taxa (ammonoids), fossil marker beds, volcaniclastic horizons and sedimentary features (e.g. colour changes) were integrated in the correlation. As a result, a comprehensive database was compiled, which contains 190 stratigraphic events of the Viséan interval of this area. Several sections are almost completely composed of shales, which are regarded to represent a slow but constant basinal background sedimentation of the Kulm facies. The thickness of lithological homogeneous sections thus indicates an approximately linear record of time and the average thicknesses of biozones and positions of stratigraphic events can easily be calculated from the compiled database. The result is an approximately time‐linear biostratigraphic scale for the Viséan Stage of the Kulm Basin. Given a numerical length of the Viséan Stage of ca. 19 Ma, 190 stratigraphic events give a mean resolution of 100 000 years. This is unique in Palaeozoic stratigraphy. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

海拉尔盆地上库力组重矿物组合特征   总被引：2，自引：0，他引：2       下载免费PDF全文

刘彤彦  邵红梅  孙先达 《地质科学》2009,44(2):707-714

海拉尔盆地兴安岭群上库力组自下而上可分出5个重矿物组合：磁黄铁矿-锆石-白钛石-锐钛矿组合,黄铁矿高含量组合,黑云母-白钛石-锆石-钛铁矿组合,菱铁矿-白钛石-黑云母-电气石组合,白钛石-黑云母-菱铁矿-石榴子石组合.不稳定矿物含量高,不同层段呈现高低韵律性变化则与火山-沉积作用强弱交替变化的环境有关.较高的ATi指数反映母岩应为中-酸性火山岩.ZTR指数不高说明重矿物的成熟度较低.由下至上陆源重矿物变少,尤其是上库力组D段（凝灰岩段）,自生黄铁矿占很高的百分比.  相似文献   

联合PROSAIL模型和植被水分指数的低矮植被含水量估算     

江海英  柴琳娜  贾坤  刘进  杨世琪  郑杰 《遥感学报》2021,25(4):1025-1036

植被冠层含水量CWC (Canopy Water Content)和植被地上部分含水量VWC (Vegetation Water Content)对于植被健康状况和土壤干旱监测具有重要意义。本文联合PROSAIL辐射传输模型和植被水分指数NDWI(Normalized Difference Water Index),发展了一种简单、通用性较好的低矮植被CWC和VWC反演方法,可实现中、高空间分辨率下的CWC和VWC估算。首先对PROSAIL模型输入参数进行敏感性分析,明确各参数对模型输出反射率的影响机制,以优化PROSAIL模型输入参数设置并生成低矮植被的反射率模拟数据。基于模拟数据,计算了4个植被水分指数NDWI_((860,1240))、NDWI_((860,1640))、NDWI_((1240,1640))和NDWI_((860,970))用于反演低矮植被CWC和VWC。基于模拟数据的结果表明,4个植被水分指数与ln (CWC)都存在明显的线性关系,基于该关系建立了CWC估算模型。该模型可以直接用于低矮植被CWC估算,并通过VWC与CWC之间的经验关系间接计算得到VWC。模型模拟结果也表明,由于NDWI_((860,1640))和NDWI_((1240,1640))高度相关(R~2=0.99),两者可以提供相似且相对较好的低矮植被CWC估算精度。基于地面实测数据的验证结果与基于模拟数据的结果表现出很好的一致性,即基于NDWI_((860,1640))和NDWI_((1240,1640))估算的VWC都有相似且较高的精度,决定系数(R~2)都为0.88,均方根误差(RMSE)分别为0.4558 kg/m~2和0.4380 kg/m~2。利用Landsat 5 TM数据对NDWI_((860,1640))估算效果的验证结果显示,模型估算CWC与地面实测CWC的R~2为0.84,RMSE为0.1342 kg/m~2,估算VWC的RMSE为0.5651 kg/m~2。本文提出的基于NDWI_((860,1640))和NDWI_((1240,1640))的CWC/VWC估算模型可被用于低矮植被的长势监测和干旱监测,为低矮植被覆盖地表的土壤水分反演提供高质量的植被水分信息。  相似文献   

遥感反演和站点观测的地气温度分布特征差异     

王念  卢致宇  徐建红  张红  张霄羽 《遥感学报》2021,25(8):1848-1861

地表温度和近地表大气温度是地球系统、大气系统以及地—气相互作用物理过程的重要参量。在陆地—大气的相互作用过程中,水汽含量、NDVI指数、下垫面变化等因素会对地—气热量传输造成一定的影响。本文首先利用地表温度产品（MYD11A1）以及气温站点数据（GSOD）获得全国尺度下地表温度年最大值、近地面气温年最大值。在此基础上,使用趋势分析法分析2003年—2018年地、气温度年最大值时空分布特征及变化趋势,以及地—气温差气候倾向率变化趋势。最后,结合大气总水汽含量产品（MYD05）、NDVI指数（MYD13A3）、二氧化碳平均浓度增长率分析导致地表温度年最大值与近地面气温年最大值趋势发生变化的原因。研究结果表明：（1）在全国尺度下,2003年—2018年地表温度年最大值呈现北高南低的空间分布特征。近地面气温年最大值的空间分布与地表温度年最大值相反。大气总水汽含量年最大值在热带、亚热带季风气候区内总体较高。水汽含量既影响近地面气温的大小,同时也受到近地面气温的影响,因此,水汽含量年最大值与近地面气温年最大值表现出一定的空间分布一致性特征。（2）在2003年—2018年期间,地表温度年最大值的气候倾向率在空间上表现出北高南低的分布特征。近地面气温年最大值的气候倾向率在空间上也表现为北高南低,与地表温度年最大值的气候倾向率变化基本一致。但地表温度年最大值的变化幅度要大于近地面气温年最大值,并且在个别区域表现不一致。主要分布在天山地区、三江平原以及秦岭南侧地区,地—气年最大值变化趋势相反即地—气差减小。（3）大气总水汽含量年最大值的增加可造成近地面气温年最大值的增加,而植被覆盖度的上升可造成地表温度年最大值下降。但在天山地区大气总水汽含量与地—气差的响应不明显,但天山地区的近地面气温年最大值与CO₂平均浓度增长率的关系较为明显。（4）遥感数据反演的地表温度年最大值和站点观测的近地面气温年最大值空间分布表现出差异,但时间变化趋势基本一致。  相似文献   

Effect of flying altitude and pulse repetition frequency on laser scanner penetration rate for digital elevation model generation in a tropical forest     

Chung-Cheng Lee  Chi-Kuei Wang 《地理信息系统科学与遥感》2018,55(6):817-838

In tropical forests, the penetration ability of airborne laser scanning (ALS) may be limited because of highly dense vegetation cover. However, in the typical planning of ALS surveys, the ability of laser pulses to penetrate forests is not considered. Nine round-trip flight lines covering the area of a tropical forest on the northeast side of the Tsengwen Reservoir in Taiwan were designed in this study. Five flight lines flew at altitudes of 1.525, 1.830, 2.135, 2.440, and 2.745 km, and the other four had pulse repetition frequencies (PRFs) of 100, 150, 200, and 250 kHz. The laser penetration index (LPI) is a quantitative index measuring the penetration ability of the ALS and consists of the ratio of the number of laser pulses reaching the forest floor to the total number of laser pulses. The LPI was used to represent the laser penetration rate and investigate the influence of flying altitude and PRF on the LPI. The results showed that as the flying altitude decreased by 1 km, the average LPI increased by 10%, and as the PRF decreased by 50 kHz, the average LPI increased by 2%. The effect of the LPI on digital elevation models (DEMs) was confirmed by visual images obtained by DEMs at five altitudes. The DEM obtained at an altitude of 2.745 km was coarsely textured, whereas that obtained at an altitude of 1.525 km was finely textured. The in-situ height data obtained from the electronic Global Navigation Satellite System (eGNSS) were compared with the data of the ALS-generated DEMs. The results indicated that when the LPI ≥60%, the height difference between the in situ data and DEM data was not prominent. However, when the LPI <60%, the ALS-derived DEM could be higher or lower than the in-situ height; the largest difference between the two was 1.7 m. The LPI of a forest should be considered for ALS survey planning, especially when consistent DEM precision for large tropical forest areas is paramount.  相似文献