再生混凝土框架顶层角节点的抗震性能试验研究     

王晓菡  柳炳康  田雨  秦一如 《地震工程与工程振动》2012,32(4):118-124

通过对3榀再生混凝土框架顶层角节点(再生粗骨料掺量为100%)在低周反复荷载作用下的抗震性能试验,对试件的破坏形态、延性、耗能能力等进行了分析。研究表明,再生混凝土框架顶层角节点试件在低周反复荷载作用下经历初裂、通裂、极限、破坏4个阶段,最终呈节点核心区剪切破坏。位移延性系数在3.27～3.95之间,具有良好的抗震性能,可用于有抗震设防要求的框架。采用ANSYS软件建立了节点的有限元计算模型,进行了单调荷载下的有限元非线性分析,得到了骨架曲线和试件的应力分布形态,有限元计算结果与试验结果吻合较好。采用《混凝土结构设计规范》规定的公式对角节点抗剪强度进行了计算并与试验数据相比较,发现计算值偏于不安全。  相似文献   

Effect of structural characteristics distribution on strength demand and ductility reduction factor of MDOF systems considering soil-structure interaction     

Behnoud Ganjavi 《地震工程与工程振动(英文版)》2012,11(2):205-220

It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings.The effect of using different code-specified lateral load patterns on the seismic performance of fixed-base buildings has been investigated by researchers during the past two decades.However,no investigation has yet been carried out for the case of soil-structure systems.In the present study,through intensive parametric analyses of 21,600 linear and nonlinear MDOF systems and considering five different shear strength and stiffness distribution patterns,including three code-specified patterns as well as uniform and concentric patterns subjected to a group of earthquakes recorded on alluvium and soft soils,the effect of structural characteristics distribution on the strength demand and ductility reduction factor of MDOF fixed-base and soil-structure systems are parametrically investigated.The results of this study show that depending on the level of inelasticity,soil flexibility and number of degrees-of-freedoms(DOFs),structural characteristics distribution can significantly affect the strength demand and ductility reduction factor of MDOF systems.It is also found that at high levels of inelasticity,the ductility reduction factor of low-rise MDOF soil-structure systems could be significantly less than that of fixed-base structures and the reduction is less pronounced as the number of stories increases.  相似文献   

小剪跨比格构式混凝土墙体抗震性能试验     

周静海  王鹏里  孟宪宏  朱静雯  侯延泽  张志伟 《地震工程与工程振动》2011,31(3):127-133

文章旨在研究不同剪跨比的格构式混凝土墙体抗震性能.将生产车间预制成EPS保温模块拼接成墙体模板,在横向和纵向孔洞中分别布置钢筋,然后在孔内浇筑自密实混凝土,形成“EPS新型节能”格构式混凝土墙体,然后对6个参数不同的试件进行低周反复水平荷载作用的试验.结果,墙体破坏形态为:首先墙体相邻格构柱间的连梁出现环状裂缝和“X”...  相似文献   

平面不对称结构非弹性地震反应分析的平扭耦联Bouc-Wen模型     

余波  杨绿峰 《地震工程与工程振动》2011,31(6):78-87

综合考虑强度退化、刚度退化、捏拢效应等典型滞回特性的影响,建立了双向地震作用下平面不对称结构非弹性地震动力响应分析的平扭耦联Bouc-Wen模型.该模型采用圆形屈服面来描述双向抗侧恢复力之间的耦合效应,而采用锥体或球体屈服面来描述双向抗侧和抗扭恢复力之间的耦合效应,并结合69条强震记录,定量地分析了平扭耦联效应对平面不...  相似文献   

Effect of hysteretic smoothness on inelastic response spectra with constant‐ductility     

Jong‐Keol Song  Henri P. Gavin 《地震工程与结构动力学》2011,40(7):771-788

This paper presents an efficient methodology for computing constant‐ductility inelastic response spectra. The computation of constant‐ductility spectra involves numerical root‐finding algorithms to find the strongest structure providing a desired ductility response. Smooth inelastic structural behavior is modeled using a first‐order nonlinear differential equation and the transient structural response is solved using an implicit algorithm requiring Newton iterations at each time step. For structural models with smooth hysteretic behavior (not piece‐wise linear), a simple root‐finding method involving a combination of hyperbolic fits, linear interpolation, and Newton's method converges upon the highest strength (conservative) solution with a small number of iterations. The effect of the hysteretic smoothness on the occurrence of multiple roots is examined for two near‐fault and two far‐fault earthquake records, and for two measures of ductility and for normalized hysteretic energy. The results indicate how the smoothness of the hysteretic behavior affects ductility demand and constant‐ductility response spectra. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Seismic performance of a 3D full‐scale high‐ductility steel–concrete composite moment‐resisting structure—Part I: Design and testing procedure     

A. Braconi  O. S. Bursi  G. Fabbrocino  W. Salvatore  R. Tremblay 《地震工程与结构动力学》2008,37(14):1609-1634

  相似文献   

Seismic performance of a 3D full‐scale high‐ductile steel–concrete composite moment‐resisting frame—Part II: Test results and analytical validation     

A. Braconi  O. S. Bursi  G. Fabbrocino  W. Salvatore  F. Taucer  R. Tremblay 《地震工程与结构动力学》2008,37(14):1635-1655

This paper presents the results of a multi‐level pseudo‐dynamic seismic test program that was performed to assess the performance of a full‐scale three‐bay, two‐storey steel–concrete composite moment‐resisting frame built with partially encased composite columns and partial‐strength beam‐to‐column joints. The system was designed to develop a ductile response in the joint components of beam‐to‐column joints including flexural yielding of beam end plates and shear yielding of the column web panel zone. The ground motion producing the damageability limit state interstorey drift caused minor damage while the ultimate limit state ground motion level entailed column web panel yielding, connection yielding and plastic hinging at the column base connections. The earthquake level chosen to approach the collapse limit state induced more damage and was accompanied by further column web panel yielding, connection yielding and inelastic phenomena at column base connections without local buckling. During the final quasi‐static cyclic test with stepwise increasing displacement–amplitudes up to an interstorey drift angle of 4.6%, the behaviour was ductile although cracking of beam‐to‐end‐plate welds was observed. Correlations with numerical simulations taking into account the inelastic cyclic response of beam‐to‐column and column base joints are also presented in the paper together. Inelastic static pushover and time history analysis procedures are used to estimate the structural behaviour and overstrength factors of the structural system under study. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Pseudo‐dynamic test of a full‐scale CFT/BRB frame—Part II: Seismic performance of buckling‐restrained braces and connections     

Keh‐Chyuan Tsai  Po‐Chien Hsiao 《地震工程与结构动力学》2008,37(7):1099-1115

This paper is Part II of a two‐part paper describing a full‐scale 3‐story 3‐bay concrete‐filled tube (CFT)/buckling‐restrained braced frame (BRBF) specimen tested using psuedo‐dynamic testing procedures. The first paper described the specimen design, experiment, and simulation, whereas this paper focuses on the experimental responses of BRBs and BRB‐to‐gusset connections. This paper first evaluates the design of the gusset connections and the effects of the added edge stiffeners in improving the seismic performance of gusset connections. Test results suggest that an effective length factor of 2.0 should be considered for the design of the gusset plate without edge stiffeners. Tests also confirm that the cumulative plastic deformation (CPD) capacity of the BRBs adopted in the CFT/BRBF was lower than that found in typical component tests. The tests performed suggest that the reduction in the BRB CPD capacities observed in this full‐scale frame specimen could be due to the significant rotational demands imposed on the BRB‐to‐gusset joints. A simple method of computing such rotational demands from the frame inter‐story drift response demand is proposed. This paper also discusses other key experimental responses of the BRBs, such as effective stiffness, energy dissipation, and ductility demands. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Parametric study of ductile moment‐resisting steel frames: A first step towards Eurocode 8 calibration     

L. Sanchez‐Ricart  A. Plumier 《地震工程与结构动力学》2008,37(7):1135-1155

A parametric study of 13 608 ductile moment‐resisting steel frames designed according to Eurocodes 3 and 8 is performed. A flowchart for the evaluation of the seismic‐resistant capacity of the designed frames is developed based on the N2 method. The design structural overstrength, ductility supply, plastic redistribution parameter, supply reduction factor and performance ratio of the frames are analysed. We determine that the frames have performance ratios higher than 1, mostly due to high values of design structural overstrength, showing that the seismic supply produced by the restraints of Eurocodes 3 and 8 is always higher than the seismic demand. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Seismic vulnerability evaluation of axially loaded steel built-up laced members Ⅱ： evaluations   总被引：3，自引：2，他引：1  

Kangmin Lee  ;Michel Bruneau 《地震工程与工程振动(英文版)》2008,7(2):125-136

The test results described in Part 1 of this paper （Lee and Bruneau, 2008） on twelve steel built-up laced members （BLMs） subjected to quasi-static loading are analyzed to provide better knowledge on their seismic behavior. Strength capacity of the BLM specimens is correlated with the strength predicted by the AISC LRFD Specifications. Assessments of hysteretic properties such as ductility capacity, energy dissipation capacity, and strength degradation after buckling of the specimen are performed. The compressive strength of BLMs is found to be relatively well predicted by the AISC LRFD Specifications. BLMs with smaller kl/r were ductile but failed to reach the target ductility of 3.0 before starting to fracture, while those with larger kl/r could meet the ductility demand in most cases. The normalized energy dissipation ratio, EC/ET and the normalized compressive strength degradation, Cr″/Cr of BLMs typically decrease as normalized displacements δ/δb,exp increase, and the ratios for specimens with larger kl/r dropped more rapidly than for specimens with smaller kl/r; similar trends were observed for the monolithic braces. The BLMs with a smaller slenderness ratio, kl/r, and width-to-thickness ratio, b/t, experienced a larger number of inelastic cycles than those with larger ratios.  相似文献