盐岩蠕变相似模型及相似材料研究   总被引：2，自引：0，他引：2  

任松  郭松涛  姜德义  杨春和 《岩土力学》2011,32(Z1):106-110

相似材料模型试验是研究岩土工程的重要手段之一。基于相似理论,应用量纲分析法,推导考虑盐岩蠕变特性的相似模型,得到相关参数的相似判据,并以不同粒径的工业盐、精铁粉为骨料,环氧树脂、乙二胺为黏合剂构成相似材料,经过大量的材料配比力学试验,得到了一种基本满足金坛盐岩蠕变相似模型要求的材料配比,为开展盐岩地下油气储库建造及运营期的变形、破坏相似材料模型试验打下了坚实的基础  相似文献   

基于数字散斑技术的深埋隧道围岩岩爆倾向相似材料试验研究     

陈智强  张永兴  周检英 《岩土力学》2011,32(Z1):141-148

利用相似材料模拟方法,借助数字散斑观测技术,对深埋隧道围岩岩爆倾向进行试验研究。分析考虑材料强度、开挖速度和支护作用影响下的岩爆发生和破坏规律,寻求岩爆发生与深埋隧道变形破坏之间内在的联系。试验结果与现场实际发生岩爆强度较高的岩石类型花岗岩、闪长岩等相比,破坏特征相似,且围岩强度越高,岩爆发生可能性越大;在高地应力状态和完整岩体中开挖速度对岩爆的发生影响较大;锚网支护对隧道围岩变形有一定的控制作用,也可一定程度上避免岩爆发生。支护试验结果与现场实际支护效果一致,随支护强度提高,隧道抵抗力增加,整体变形减小、稳定性提高。所得试验结论为深埋隧道的合理设计和安全开挖提供技术指导和理论依据,对革新深埋隧道开挖技术和支护技术具有重要的意义  相似文献   

Procedures for calibration of linear models for damage limitation in design of masonry‐infilled RC frames          下载免费PDF全文

Paolo Ricci  Maria Teresa De Risi  Gerardo Mario Verderame  Gaetano Manfredi 《地震工程与结构动力学》2016,45(8):1315-1335

Recent earthquakes have confirmed the role played by infills in the seismic response of reinforced concrete buildings. The control and limitation of damage to such nonstructural elements is a key issue in performance‐based earthquake engineering. The present work is focused on modeling and analysis of damage to infill panels, and, in particular, it is aimed towards linear analysis procedures for assessing the damage limitation limit state of infilled reinforced concrete frames. First, code provisions on infill modeling and acceptance criteria at the damage limitation limit state are reviewed. Literature contributions on damage to unreinforced masonry infill panels and corresponding displacement capacity are reported and discussed. Two procedures are then proposed aiming at a twofold goal: (i) the determination of ‘equivalent’ interstory drift ratio limits for a bare frame model and (ii) the estimation of the stiffness of equivalent struts representing infill walls in a linear model. These two quantities are determined such that a linear model ensures a reliable estimation of seismic capacity at the damage limitation limit state, providing the same intensity level as that obtained from nonlinear analyses carried out on structural models with infills. Finally, the proposed procedures are applied to four‐story and eight‐story case study‐infilled frames, designed for seismic loads according to current technical codes. The results of these application examples are presented and discussed. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Prediction of input energy spectrum: attenuation models and velocity spectrum scaling          下载免费PDF全文

F. S. Alıcı  Halûk Sucuoğlu 《地震工程与结构动力学》2016,45(13):2137-2161

  相似文献   

Numerically based proposals for the stiffness and strength of masonry infills with openings in reinforced concrete frames          下载免费PDF全文

Farhad Akhoundi  Paulo B. Lourenço  Graça Vasconcelos 《地震工程与结构动力学》2016,45(6):869-891

Aimed at investigating the effect of openings on the in‐plane behaviour of masonry infills in reinforced concrete frames, a parametric study is presented based on model calibration via experimental tests. Two types of openings are investigated: central window openings and different combinations of door and window openings based on the typologies of southern European countries. First, a finite element model of the structure is made using the DIANA software program. Then, after calibration with experimental results, a parametric analysis is carried out to investigate the effect of the presence and location of the different types of openings on the in‐plane behaviour of the infilled frame. Finally, different equations for predicting the initial stiffness and lateral strength of infilled frames with any types of openings were obtained. An α factor related to the geometry of the piers between openings is proposed to take into account the location of the openings in the developed equations. Subsequently, the masonry infill panel is replaced by a diagonal strut. An empirical equation is also proposed for the width of an equivalent strut to replace a masonry infill panel with openings in such a way that they possess the same initial stiffness. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

多空隙组合地质单元渗流理论分析与试验     

夏伟  符文熹  赵敏  周勇 《岩土力学》2016,37(11):3175-3183

岩体通常是以孔隙岩石为基质并包含各种成因的裂隙和溶隙的复杂多空隙组合地质材料。为研究孔隙-裂隙-溶隙多空隙组合介质的渗流特性,在简要介绍多孔介质渗流Darcy定律、平板窄缝流Poiseuille定律和圆形管道流Darcy-Weibach理论的基础上,分析了几种孔隙-裂隙-溶隙组合情况的多空隙介质渗流特性,推导出相应组合的等效渗透系数KE,给出了描述多空隙组合介质KE的一般表达式,讨论了影响各种空隙组合KE的主要因素。以普通砖模拟岩石基质,通过砖身钻孔填充及砖间缝隙填充,试验模拟了岩溶岩体和裂隙岩体中溶孔和裂隙填充后的渗透情况。试验结果与所推求理论公式计算出的KE在同一量级且误差很小,很好地验证了所推导的多空隙组合介质渗透系数表达式的有效性。  相似文献   

基于节理网络有限元的柱状节理岩体等效变形模量结构效应研究     

崔臻  魏倩  侯靖  盛谦  李良权 《岩土力学》2016,37(10):2921-2928

因其特殊的地质成因,柱状节理成为一种具有强烈非连续性及各向异性的特殊岩体结构。以白鹤滩水电工程设计、建设中所遇到的柱状节理玄武岩体为背景,针对柱状节理岩体的等效变形模量问题,在探讨了其结构效应表征参数的基础上,利用节理网络有限元为工具,研究各结构效应表征参数对柱状节理岩体等效变形模量的影响。研究结果表明：在柱轴线横向平面上,对于柱体不规则程度,当柱体完全不规则相对于完全规则情况,等效模量提高大约10%左右;在其他条件不变情况下,当柱体平均边长从0.1 m增加至0.5 m时,等效模量从5.36 GPa增加至23.4 GPa;对不同加载方向的研究结果表明,柱状节理在柱轴横向平面上可以视作各向同性;当节理刚度线性递增时,相应的岩体等效模量也基本符合线性递增的规律。在平行柱体轴线平面,节理组2间距越大,柱状节理岩体的等效变形模量越大;随着错距比的增加,柱状节理岩体的等效变形模量呈现先增加后减少的趋势,当错距比为50%时,节理岩体的等效变形模量取最大值;对于节理刚度的影响,与柱轴横向平面类似的,随柱体轴线平面上节理刚度的线性增加,相应的岩体模量也基本符合线性递增的规律。该研究成果与已有的现场研究成果及三维数值模型成果相比,吻合良好。说明了文中提供的研究结论具有较好的可信度及参考价值。  相似文献   

非饱和土增湿变形的实用计算方法     

刘兰兰  李鸿儒  常秋影  李晓乐  王洪宇  赵传海 《吉林大学学报(地球科学版)》2016,46(6):1790-1798

非饱和土力学研究目前还未进入实用阶段,主要原因在于吸力量测困难。本文提出了用等效吸力代替真实吸力的试验方法。首先以常规静三轴试验得到的原状饱和土以及非饱和土的应力-应变曲线为基础,根据变形等效的原则确定与某一饱和度相当的围压即为等效吸力;然后建立饱和度与等效吸力之间的非线性关系,并验证了该数学公式的正确性;再根据试验结果分析含水量对非饱和土强度的影响,建立了非饱和土的实用抗剪强度公式;最后按照邓肯-张模型的参数整理方法得到了不同饱和度非饱和土的模型参数,探索这些参数随饱和度的变化规律,建立了引入饱和度的非饱和黄土实用非线性模型,并进行了降雨入渗情况下非饱和土增湿变形的计算。结果表明,饱和度最大值为95%,等效吸力最大值为160 kPa,最大水平位移与竖向位移分别为0.6 cm和20.0 cm,均出现在浸水位置。计算结果合理地反映了非饱和土变形的分布趋势,验证了方法的合理性。  相似文献   

Performance spectra based method for the seismic design of structures equipped with passive supplemental damping systems     

Jack Wen Wei Guo  Constantin Christopoulos 《地震工程与结构动力学》2013,42(6):935-952

A new direct performance‐based design method utilizing design tools called performance‐spectra (P‐Spectra) for low‐rise to medium‐rise frame structures incorporating supplemental damping devices is presented. P‐Spectra are graphic tools that relate the responses of nonlinear SDOF systems with supplemental dampers to various damping parameters and dynamic system properties that structural designers can control. These tools integrate multiple response quantities that are important to the performance of a structure into a single compact graphical format to facilitate direct comparison of different potential solutions that satisfy a set of predetermined performance objectives under various levels of seismic hazard. An SDOF to MDOF transformation procedure that defines the required supplemental damping properties for the MDOF structure to achieve the response defined by the target SDOF system is also presented for hysteretic, linear viscous and viscoelastic damping devices. Using nonlinear time‐history analyses of idealized shear structures, the accuracy of the transformation procedure is verified. A seismic performance upgrade design example is presented to demonstrate the usefulness of the proposed method for achieving design performance goals using supplemental damping devices. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Reconstruction of a flash flood with large wood transport and its influence on hazard patterns in an ungauged mountain basin   总被引：2，自引：0，他引：2  

V. Ruiz‐Villanueva  J. M. Bodoque  A. Díez‐Herrero  M. A. Eguibar  E. Pardo‐Igúzquiza 《水文研究》2013,27(24):3424-3437

The reconstruction of past flash floods in ungauged basins leads to a high level of uncertainty, which increases if other processes are involved such as the transport of large wood material. An important flash flood occurred in 1997 in Venero Claro (Central Spain), causing significant economic losses. The wood material clogged bridge sections, raising the water level upstream. The aim of this study was to reconstruct this event, analysing the influence of woody debris transport on the flood hazard pattern. Because the reach in question was affected by backwater effects due to bridge clogging, using only high water mark or palaeostage indicators may overestimate discharges, and so other methods are required to estimate peak flows. Therefore, the peak discharge was estimated (123 ± 18 m³ s^–1) using indirect methods, but one‐dimensional hydraulic simulation was also used to validate these indirect estimates through an iterative process (127 ± 33 m³ s^–1) and reconstruct the bridge obstruction to obtain the blockage ratio during the 1997 event (~48%) and the bridge clogging curves. Rainfall–Runoff modelling with stochastic simulation of different rainfall field configurations also helped to confirm that a peak discharge greater than 150 m³ s^–1 is very unlikely to occur and that the estimated discharge range is consistent with the estimated rainfall amount (233 ± 27 mm). It was observed that the backwater effect due to the obstruction (water level ~7 m) made the 1997 flood (~35‐year return period) equivalent to the 50‐year flood. This allowed the equivalent return period to be defined as the recurrence interval of an event of specified magnitude, which, where large woody debris is present, is equivalent in water depth and extent of flooded area to a more extreme event of greater magnitude. These results highlight the need to include obstruction phenomena in flood hazard analysis. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献