Dynamics of Saxothuringian subduction channel/wedge constrained by phase‐equilibria modelling and micro‐fabric analysis          下载免费PDF全文

S. Collett  P. Štípská  V. Kusbach  K. Schulmann  G. Marciniak 《Journal of Metamorphic Geology》2017,35(3):253-280

Subduction and exhumation dynamics can be investigated through analysis of metamorphic and deformational evolution of associated high‐grade rocks. The Erzgebirge anticline, which forms at the boundary between the Saxothuringian and Teplá‐Barrandian domains of the Bohemian Massif, provides a useful study area for these processes owing to the occurrence of numerous meta‐basites preserving eclogite facies assemblages, and coesite and diamond bearing quartzofeldspathic lithologies indicating subduction to deep mantle depths. The prograde and retrograde evolution of meta‐basite from the Czech portion of the Erzgebirge anticline has been constrained through a combination of thermodynamic modelling and conventional thermobarometry. Garnet growth zoning indicates that the rocks underwent burial and heating to peak conditions of 2.6 GPa and at least 615 °C. Initial exhumation occurred with concurrent cooling and decompression resulting in the growth of amphibole and zoisite poikiloblasts overgrowing and including the eclogite facies assemblage. The development of clinopyroxene–plagioclase–amphibole symplectites after omphacite and Al‐rich rims on matrix amphibole indicate later heating at the base of the lower crust. Omphacite microstructures, in particular grain size analysis and lattice‐preferred orientations, indicate that the prograde evolution was characterized by a constrictional strain geometry transitioning into plane strain and oblate fabrics during exhumation. The initial constrictional strain pattern is interpreted as being controlled by competing slab pull and crustal buoyancy forces leading to necking of the subducting slab. The transition to plane strain and flattening geometries represents transfer of material from the subducting lithosphere into a subduction channel, break‐off of the dense slab and rebound of the buoyant crustal material.  相似文献   

Characterizing spatial and temporal variation in 18O and 2H content of New Zealand river water for better understanding of hydrologic processes     

Jing Yang  Bruce D. Dudley  Kelsey Montgomery  Will Hodgetts 《水文研究》2020,34(26):5474-5488

Time series of hydrogen and oxygen stable isotope ratios (δ²H and δ¹⁸O) in rivers can be used to quantify groundwater contributions to streamflow, and timescales of catchment storage. However, these isotope hydrology techniques rely on distinct spatial or temporal patterns of δ²H and δ¹⁸O within the hydrologic cycle. In New Zealand, lack of understanding of spatial and temporal patterns of δ²H and δ¹⁸O of river water hinders development of regional and national-scale hydrological models. We measured δ²H and δ¹⁸O monthly, together with river flow rates at 58 locations across New Zealand over a two-year period. Results show: (a) general patterns of decreasing δ²H and δ¹⁸O with increasing latitude were altered by New Zealand's major mountain ranges; δ²H and δ¹⁸O were distinctly lower in rivers fed from higher elevation catchments, and in eastern rain-shadow areas of both islands; (b) river water δ²H and δ¹⁸O values were partly controlled by local catchment characteristics (catchment slope, PET, catchment elevation, and upstream lake area) that influence evaporation processes; (c) regional differences in evaporation caused the slope of the river water line (i.e., the relationship between δ²H and δ¹⁸O in river water) for the (warmer) North Island to be lower than that of the (cooler, mountain-dominated) South Island; (d) δ²H seasonal offsets (i.e., the difference between seasonal peak and mean values) for individual sites ranged from 0.50‰ to 5.07‰. Peak values of δ¹⁸O and δ²H were in late summer, but values peaked 1 month later at the South Island sites, likely due to greater snow-melt contributions to streamflow. Strong spatial differences in river water δ²H and δ¹⁸O caused by orographic rainfall effects and evaporation may inform studies of water mixing across landscapes. Generally distinct seasonal isotope cycles, despite the large catchment sizes of rivers studied, are encouraging for transit time analysis applications.  相似文献   

A hydropedological approach to simulate streamflow and soil water contents with SWAT+     

Johan van Tol  Katrin Bieger  Jeffrey G. Arnold 《水文研究》2021,35(6):e14242

Reflecting internal catchment hydrological processes in hydrological models is important for accurate predictions of the impact of climate and land-use change on water resources. Characterizing these processes is however difficult and expensive due to their dynamic nature and spatio-temporal variability. Hydropedology is a relatively new discipline focusing on the synergistic integration of hydrology, soil physics and pedology. Hydropedological interpretations of soils and soil distribution can be used to characterize key hydrological processes, especially in areas with no or limited hydrometric measurements. Here we applied a hydropedological approach to reflect flowpaths through detailed routing in SWAT+ for a 157 ha catchment (Weatherley) in South Africa. We compared the hydropedological approach and a standard (no routing) approach against measured streamflow (two weirs) and soil water contents (13 locations). The catchment was treated as ‘ungauged’ and the model was not calibrated against hydrometric measurements in order to determine the direct contribution of hydropedology on modelling efficiency. Streamflow was predicted well without calibration (NSE > 0.8; R² > 0.82) for both approaches at both weirs. The standard approach yielded slightly better streamflow predictions. The hydropedological approach resulted in considerable improvements in the simulation of soil water contents (R² increased from 0.40 to 0.49 and PBIAS decreased from 40% to 20%). The routing capacity of SWAT+ as employed in the hydropedological approach reduced the underestimation of wetland water regimes drastically and resulted in a more accurate representation of the dominant hydrological processes in this catchment. We concluded that hydropedology can be a valuable source of ‘soft data’ to reflect internal catchment structure and processes and, potentially, for realistic calibrations in other studies, especially those conducted in areas with limited hydrometric measurements.  相似文献   

A thermo-mechanical coupled constitutive model for clay based on extended granular solid hydrodynamics     

《Computers and Geotechnics》2016

  相似文献   

广西官村岩溶溪流中生物地球化学控制的DIC和NO3-昼夜变化研究     

张陶  蒲俊兵  袁道先  李建鸿 《地质学报》2016,90(8):1965-1976

为了解岩溶区控制溪流中溶解无机碳(DIC)和NO_3~-昼夜变化的生物地球化学过程以及DIC和NO_3~-日变化量,于2014-07-22~2014-07-24期间,在广西壮族自治区融安县官村溪流中包括地下河出口(CK)和下游雷崖村(LY)设置两个监测点同时对水体物理化学参数以及C、N同位素(δ~(13) CDIC、δ~(15) N-NO_3~-和δ~(18) O-NO_3~-)展开了为期2d的高分辨率昼夜监测采样工作。结果发现CK点各物理化学参数没有表现出昼夜变化,但是LY点Ca2+、DIC以及PCO2表现出明显的昼夜变化规律,即白天下降夜间上升且与DO和pH表现出明显的负相关关系。相对于CK点,在白天水生光合生物光合作用导致LY点DIC下降的同时δ~(13) CDIC上升,而在夜间呼吸作用导致LY点DIC上升的同时δ~(13) CDIC下降且部分时间段要低于CK点δ~(13) CDIC值。溪流中的NH4+在监测期间基本上都在下降而NO_3~-离子在夜间和上午时间段都在上升,δ~(15) N-NO_3~-却表现出下降的趋势,且比较接近δ~(15) N-NO_3~-初始值,而NO_3~-离子在下午时间段出现下降的趋势。结果表明溪流中DIC昼夜变化主要受到水生植物的光合作用和呼吸作用控制,且通过质量平衡方程计算得知溪流中由于光合作用吸收无机碳而转为有机碳的量为0.94kgC/d,这部分有机碳可以形成相对长期稳定的自然C汇。溪流在夜间和上午时间段发生了N的硝化作用,增长量为2.08kgN/d,但在下午时间段(12:00~18:00)发生了N的同化作用,损失量为0.42kgN/d。溪流输出的NO_3~--N的量为1.66kgN/d,表明在富碳、富钙的岩溶溪流中,有利于水生光合生物的生长,促进N的同化作用的发生,从而减少溪流输出NO_3~--N的量,说明岩溶区溪流N的生物地球化学过程可能在昼夜尺度上改变水质。  相似文献   

内蒙古东升庙和炭窑口多金属硫化物矿床铁同位素地球化学特征及其成矿指示意义     

高兆富  朱祥坤  高文革  王炳林  孙剑  罗照华  包创  唐超 《地质学报》2016,90(2):352-360

本文报道了内蒙古狼山成矿带内两个最大的铅锌多金属硫化物矿床——东升庙矿床和炭窑口矿床中黄铁矿、黄铜矿单矿物的铁同位素研究结果。东升庙矿床绢云石墨片岩中不规则状黄铁矿的铁同位素组成δ~(56)Fe_(-IRMM)值在+0.04‰~+1.11‰之间,呈现铁的重同位素富集,指示了海水中的铁以氧化态沉淀并在成岩期转化成黄铁矿的矿化过程。东升庙和炭窑口矿床富硫化物矿石中黄铁矿和黄铜矿的铁同位素组成δ~(56)Fe_(-IRMM)值的变化范围为-1.33‰~+0.08‰,具有热液成矿特征,指示金属成矿物质来源于热液流体。另外,绢云石墨片岩中脉状黄铁矿的铁同位素组成δ~(56)Fe_(-IRMM)值的变化范围为-0.39‰~-0.04‰,处于矿石黄铁矿和围岩不规则状黄铁矿之间,指示脉状黄铁矿是热液矿化的产物,并在成矿过程中混入了围岩中早先形成的富集铁的重同位素的黄铁矿。绢云石墨片岩中广泛发育的不规则状黄铁矿与赋存在绢云石墨片岩中的富硫化物矿体具有完全不同的铁同位素组成,指示热液活动对不规则状黄铁矿没有明显成矿物质贡献,因此同沉积热液活动成矿的可能性不大。结合赋存在白云石大理岩中硫化物矿体的顶、底部常见硅化的白云石大理岩角砾,本文提出后生矿化是东升庙多金属硫化物矿体的主要成矿方式。另外,东升庙矿床和炭窑口矿床的矿石硫化物具有相似的铁同位素组成特征,指示两者的成矿物质来源具有相似性。  相似文献   

Predictive geochemical mapping using environmental correlation     

《Applied Geochemistry》2016

The distribution of chemical elements at and near the Earth's surface, the so-called critical zone, is complex and reflects the geochemistry and mineralogy of the original substrate modified by environmental factors that include physical, chemical and biological processes over time.Geochemical data typically is illustrated in the form of plan view maps or vertical cross-sections, where the composition of regolith, soil, bedrock or any other material is represented. These are primarily point observations that frequently are interpolated to produce rasters of element distributions. Here we propose the application of environmental or covariate regression modelling to predict and better understand the controls on major and trace element geochemistry within the regolith. Available environmental covariate datasets (raster or vector) representing factors influencing regolith or soil composition are intersected with the geochemical point data in a spatial statistical correlation model to develop a system of multiple linear correlations. The spatial resolution of the environmental covariates, which typically is much finer (e.g. ∼90 m pixel) than that of geochemical surveys (e.g. 1 sample per 10-10,000 km²), carries over to the predictions. Therefore the derived predictive models of element concentrations take the form of continuous geochemical landscape representations that are potentially much more informative than geostatistical interpolations.Environmental correlation is applied to the Sir Samuel 1:250,000 scale map sheet in Western Australia to produce distribution models of individual elements describing the geochemical composition of the regolith and exposed bedrock. As an example we model the distribution of two elements – chromium and sodium. We show that the environmental correlation approach generates high resolution predictive maps that are statistically more accurate and effective than ordinary kriging and inverse distance weighting interpolation methods. Furthermore, insights can be gained into the landscape processes controlling element concentration, distribution and mobility from analysis of the covariates used in the model. This modelling approach can be extended to groups of elements (indices), element ratios, isotopes or mineralogy over a range of scales and in a variety of environments.  相似文献   

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration     

WANG Guojian  TANG Yuping  CHENG Tongjin  TANG Junhong  FAN Ming  LU Li 《《地质学报》英文版》2016,90(6):2149-2162

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.  相似文献   

华南大规模低温成矿的主要科学问题   总被引：9，自引：7，他引：2  

胡瑞忠  付山岭  肖加飞 《岩石学报》2016,32(11):3239-3251

大面积低温成矿是全球独特的重要成矿事件。华南地区扬子地块西南部面积约50万平方千米的广大范围,低温矿床广泛发育,包括卡林型金矿床、MVT型Pb-Zn矿床和脉型锑、汞、砷等矿床,构成华南低温成矿域。该成矿域由川滇黔接壤区的Pb-Zn、右江盆地Au-Sb-As-Hg和湘中盆地Sb-Au等三个矿集区组成。其中的矿床主要赋存于沉积岩中,受断裂构造控制,形成于100~250℃的低温条件下。以往的研究取得了重要进展,但成矿时代、成矿动力学背景、成矿物质基础和成矿过程等关键科学问题一直悬而未决。近年的研究表明,这些矿床可能形成于200~230Ma(印支期)和130~160Ma(燕山期)两个时期,除川滇黔Pb-Zn矿集区由盆地卤水演化成矿外,其余两个矿集区的形成可能均受印支期和燕山期的深部岩浆活动驱动,尽管成矿流体中的水主要是大气成因地下水。本专题报道了近年来这些方面的最新研究进展,包括20篇文章,主要涉及这些低温矿床的地质地球化学特征、成矿时代、矿床成因和成矿动力学背景等。  相似文献   

青岛冷水团的消亡机理研究   总被引：1，自引：0，他引：1  

张启龙  刘志亮  齐继峰  杨德周  郑冬梅 《海洋学报》2016,38(5):27-33

本文基于多年月平均水温资料,分析了青岛冷水团的长消过程,并利用气候态月平均大气数据和数值模拟结果,探讨了青岛冷水团的消亡机理。结果表明,青岛冷水团3月出现,4月成型,5月最盛,6月减弱,7月消失;南黄海6-7月间偏南风的增强和温跃层以下反气旋涡的减弱是青岛冷水团消亡的动力机制,而海面净热通量的下传和水平热量的输入则是青岛冷水团消亡的热力机制。  相似文献