内蒙古中西部地区震源参数和场地响应反演   总被引：15，自引：0，他引：15       下载免费PDF全文

高立新  郑斯华  丁风和 《地震工程学报》2005,27(2):109-114

采用Atkinson方法，基于遗传算法，利用呼和浩特数字地震台网7个子台记录的9次质量较高的地震事件资料，计算了内蒙古中西部地区的品质因子Q值和非弹性衰减系数c（f）。在所研究的频率范围内，前者和频率．厂有很好的线形关系：Q（f）=116．8f^1.000后者与频率．厂的变化关系不明显。在此基础上采用Moya方法反演了7个地震台的场地响应和地震的震源参数，并对它们之间的相互关系进行了讨论。结果显示在所研究的频率域内7个基岩台站的场地均不同程度的存在放大作用，其次震源参数间具有较好的线性关系。本文还详细介绍了Atkinson方法和Moya方法的原理和计算步骤。  相似文献   

Probabilistic approach for active control of structures: experimental verification     

Jae‐Seung Hwang  Kyung‐Won Min  Sang‐Hyun Lee  Hongjin Kim 《地震工程与结构动力学》2005,34(3):207-225

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Evolutionary aseismic design and retrofit of structures with passive energy dissipation     

G. F. Dargush  R. S. Sant 《地震工程与结构动力学》2005,34(13):1601-1626

A new computational framework is developed for the design and retrofit of building structures by considering aseismic design as a complex adaptive process. For the initial phase of the development within this framework, genetic algorithms are employed for the discrete optimization of passively damped structural systems. The passive elements may include metallic plate dampers, viscous fluid dampers and viscoelastic solid dampers. The primary objective is to determine robust designs, including both the non‐linearity of the structural system and the uncertainty of the seismic environment. Within the present paper, this computational design approach is applied to a series of model problems, involving sizing and placement of passive dampers for energy dissipation. In order to facilitate our investigations and provide a baseline for further study, we introduce several simplifications for these initial examples. In particular, we employ deterministic lumped parameter structural models, memoryless fitness function definitions and hypothetical seismic environments. Despite these restrictions, some interesting results are obtained from the simulations and we are able to gain an understanding of the potential for the proposed evolutionary aseismic design methodology. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

大菱鲆体重和主要体型比率性状的遗传动态分析     

王新安  马爱军 《海洋学报(英文版)》2020,39(2):22-27

The objective of this study was to estimate genetic parameters of body width(BW)to body length(BL)ratio(BW/BL)and of body weight traits(BWT)in turbot,and to elucidate the genetic mechanism of the two traits during ontogeny by dynamic genetic analysis.From 3 to 27 months,BW,BL and BWT of each communally stocked fish were measured every 3 months.The BW/BL ratio was measured at different sampling ages.A twotrait animal model was used for genetic evaluation of traits.The results showed that the heritability values of BW/BL ratio ranged from 0.2168 to 0.3148,corresponding to moderate heritability.The BWT heritability values ranged from 0.2702 to 0.3479 corresponding to moderate heritability.The heritability of BW/BL ratio was lower than that of BWT,except at 3 months of age.Genetic correlation between BW/BL ratio and BWT decreased throughout the measurement period.Genetic correlations were higher than the phenotypic correlations.The current results for estimating genetic parameters demonstrate that the BW/BL ratio could be used as a phenotypic marker of fast-growing turbot,and the BW/BL ratio and BWT could be improved simultaneously through selective breeding.  相似文献   

一种顾及有色噪声的四星座GNSS动态导航滤波算法     

孙清峰  蔡昌盛  崔先强  易重海 《大地测量与地球动力学》2019,39(6):625-628

经典Kalman滤波要求噪声是高斯白噪声，而动态GNSS定位的观测误差和状态预测误差往往是有色噪声。本文提出一种简便的有色噪声函数模型拟合滤波算法，采用前面历元的观测残差和状态残差建立有色噪声模型，削弱有色噪声对动态导航解算的影响。采用四星座GNSS接收机观测数据进行动态导航实验，结果表明，顾及有色噪声的动态导航滤波算法比未顾及有色噪声的经典Kalman滤波算法定位精度更高，三维位置精度提升9%以上。  相似文献   

An adaptive finite element model for wellbore breakout simulation     

Diogo L. Cecílio  Philippe R. B. Devloo  Sônia M. Gomes  Erick S.R. Santos 《国际地质力学数值与分析法杂志》2019,43(4):814-828

A finite element formulation is proposed and implemented for analysing the stability of excavated wells using the DiMaggio-Sandler constitutive elastoplastic model with a typical carbonate reservoir configuration. The quality of the finite element approximation is ensured by applying smooth curved elements adapted to the wellbore geometry, and h − p adaptive finite element meshes in the plastic zone. General purpose procedures are defined to transfer the elastoplastic deformation history to newly created integration points. A breakout damage criterion is proposed based on the second invariant of the deviatoric plastic deformation tensor. This damage criterion is used to apply a mesh movement algorithm to represent material collapse. The automatic successive application of the breakout damage criterion results in elliptical realistically looking geometries obtained in experiments reported in the literature.  相似文献   

改进A?的高层建筑逃生路径规划算法研究   总被引：1，自引：0，他引：1  

靳海亮  王赢乐  袁鸣  陈梦龙 《测绘通报》2019,(11):17-21,25

针对高层建筑内部结构复杂，发生火灾时没有疏散引导情况，逃生通道极易发生拥堵导致疏散效率降低的问题，本文基于对A*算法的改进，提出了高层建筑逃生路径规划算法。该算法以高层建筑内部路网节点为关键要素，综合火灾发生位置、人员密度、人员数量等因素，从逃生终点优化分配、节点扩展优化、权值优化3个方面进行改进，实现了火灾发生时高层建筑内部的逃生路径规划，并以某高层建筑为例，验证了本文算法的可行性。  相似文献   

一种移动视频与地理场景的融合方法     

赵维淞  钱建国  汤圣君  王伟玺  李晓明  郭晗 《测绘通报》2020,(12):11-16

快速准确地了解灾害现场状况是救灾过程中的重中之重。通常发生灾害都会使用无人机进行现场勘察，但是无人机视频难以与实际的地理场景关联起来，为此本文提出了一种移动视频与地理场景的融合方法。该方法首先采用具有仿射不变性的ASIFT算法检测特征点，将匹配后的特征点采用RANSAC算法进行迭代剔除噪点，计算视频与地理场景最优的透视变换矩阵模型参数；然后将计算得到的透视变换参数应用到视频数据，恢复视频角点坐标；最后通过内插得出所有视频帧的角点坐标，实现视频与DOM的精确融合。试验结果表明，对视频数据匹配的间隔帧越短，其整体融合精度越高，通过本文方法进行视频与地理场景融合的误差标准差低于10 m。  相似文献   

台湾以东黑潮路径识别与变化规律   总被引：1，自引：0，他引：1  

王辉赞  魏林进  张全礼  刘磊  刘科峰 《海洋与湖沼》2018,49(2):271-279

为研究对中国台湾以东海域黑潮路径及其变化,本文基于法国空间局AVISO中心提供的1993—2015年的卫星遥感海表流场逐日资料,对121°—125°E,22.4°—25°N海域黑潮路径进行了逐日识别,得到了共计23年累计8400天的台湾以东黑潮流轴的逐日路径,并研究其在不同纬度的流轴位置及其对应的表面黑潮流量的时空变化规律。主要结论如下:(1)采用模糊C-均值聚类法对台湾以东黑潮流轴路径进行聚类分析,发现台湾以东黑潮流轴在24°N以南出现明显摆动,形成正常和偏东两种路径;黑潮流轴存在明显的时间变化,流轴偏东现象年平均大约出现25次,大致每隔3年出现一次偏东较少的现象,各月流轴偏东次数以4、5月最少,10月至次年3月较多;(2)台湾以东黑潮表面流量大小在6.2—8.3×104m2/s之间;总体上来说,纬度越高流量越大,在23.5°N左右范围内存在一个流量低值中心;在24.3°N以北流量总体较大,且增长趋势稳定,同时表面流量大小具有较强的季节和年际变化特征。  相似文献   

高分五号热红外传感器多通道SST反演     

崔文杰  李家国  李忠  朱利  王殿忠  张宁 《遥感学报》2020,24(7):852-866

2018-05高分五号（GF-5）卫星发射升空，其上搭载的全谱段成像仪在热红外8—13 μm谱段范围内具有4个温度反演通道（B09,B10,B11,B12），空间分辨率设计优于40 m，在国内民用传感器领域实现了由单通道向多通道、中空间分辨率向高空间分辨率的跨越式突破，使得GF-5卫星热红外数据在地表热环境遥感领域具有极其重要应用价值。本研究基于GF-5的4个热红外通道的通道响应函数，利用全球742条TIGR（Thermodynamic Initial Guess Retrieval）探空廓线数据，进行不同观测角度、水汽含量和海表发射率条件下的MODTRAN4.0（Moderate resolution atmospheric Transmittance and Radiance code4.0)辐射传输过程模拟，基于模拟结果分别对两通道、三通道和四通道劈窗算法海表温度SST（ Sea Surface Temperature）反演系数进行修订，并分析观测角度、水汽含量和海表发射率对不同通道组合的精度影响，并通过GF-5卫星实际反演的SST结果进行验证。GF-5全谱段成像仪SST反演两通道劈窗算法组合共有6种，即B09-B10、B09-B11、B09-B12、B10-B11、B10-B12、B11-B12；三通道劈窗算法组合共有4种，即B09-B10-B11、B09-B10-B12、B09-B11-B12、B10-B11-B12；四通道劈窗算法组合1种，即B09-B10-B11-B12。通过对不同通道组合形式研究发现，水汽含量对SST反演精度有较大的影响，且温度反演的精度随着水汽含量的增加而降低；其次是观测角度，SST反演精度随着观测天顶角的增大而降低；最后是发射率的影响，两通道、三通道和四通道劈窗算法SST反演精度随着发射率的变化总体在0.1 K以内变化。最后以大亚湾核电站周围海域为验证区，用GF-5热红外遥感影像进行SST的反演并做误差分析，结果表明B09-B10通道SST反演实际误差为0.57 K，反演精度较高，实际误差与理论模拟误差相差0.24 K，差异的来源主要包括辐射定标和传感器噪声等要素影响，其他通道形式反演精度有待于传感器响应稳定后进一步验证。  相似文献