土壤入渗特性的空间变异性及土壤转换函数   总被引：4，自引：0，他引：4       下载免费PDF全文

刘继龙  马孝义  张振华 《水科学进展》2010,21(2):214-221

以在杨陵一级阶地上进行的入渗试验为基础,利用多重分形和联合多重分形方法,研究分析了土壤入渗特性在多尺度上的空间变异性及与土壤物理特性的相关性,并在此基础上建立了土壤入渗特性的土壤转换函数。研究表明:土壤入渗特性具有多重分形特征,观测尺度上,稳定入渗率、前30 min累积入渗量的空间变异都主要由粗粉粒和粘粒含量的空间变异造成。在多尺度上,稳定入渗率的空间变异受土壤容重、粗粉粒和粘粒含量的空间分布影响显著,前30 min累积入渗量的空间变异受粗粉粒和粘粒含量的空间分布影响显著,与观测尺度上的影响因素相同。基于联合多重分形分析建立的稳定入渗率的土壤转换函数的计算误差较小,前30 min累积入渗量的土壤转换函数的计算误差较大。  相似文献   

紫色土典型三角形层状剖面入渗模拟   总被引：1，自引：1，他引：0       下载免费PDF全文

程冬兵  张平仓  李亚龙  蔡崇法 《水科学进展》2010,21(3):315-320

通过室内特制的土壤水分入渗试验装置,分别设置上粗下细和上细下粗两种典型不同质地紫色土三角形层状剖面,探讨典型不规则层次结构的土壤入渗特性。结果显示,同一三角形层状剖面入渗,粗质土半剖面的垂直湿润锋随时间推进速度快于细质土。对于粗质土,上细下粗剖面设置下其半剖面的垂直湿润锋随时间推进速度快于上粗下细,但对于细质土,两种层状剖面设置下其垂直湿润锋随时间推进速度差异不明显。无论上粗下细,还是上细下粗,两种层状剖面对斜面湿润锋变化曲线影响不大。两种层状剖面入渗,湿润锋、入渗速率与时间均呈极显著幂函数关系。建立的紫色土典型三角形层状剖面入渗模型,经验证,模拟值与实测值具有非常好的一致性,且可与经验模型相互转换,模型参数也具有一定的物理意义。  相似文献   

基于点入渗参数计算土质渠床自由渗漏损失的方法   总被引：1，自引：0，他引：1       下载免费PDF全文

李红星  樊贵盛 《水科学进展》2010,21(3):321-326

基于非饱和土质渠床有压单点入渗试验,对自由渗漏情况下土壤有压入渗入渗率随时间的变化过程进行了系统性的分析,建立了渠床土壤有压点入渗经验模型,研究了土壤入渗模型参数与水深之间的函数关系。基于点入渗参数与水深之间的函数关系,提出了沿断面积分计算渠道输水渗漏量的模型。该计算模型通过入渗模型参数全面反映了渠道土质、干容重、含水量和水深对渗漏量的影响。计算实例表明:与考斯加科夫公式计算结果相比较,该计算结果可更真实地反映渠道渗漏量随时间的变化过程,并具有更高的精度,证明利用点入渗参数计算渠道输水渗漏量是可行的。  相似文献   

含砾石土壤降雨入渗过程模拟   总被引：6，自引：2，他引：4       下载免费PDF全文

朱元骏  邵明安 《水科学进展》2010,21(6):779-787

在室内模拟降雨试验的基础上,利用多重相互作用连续体(MINC)组件,对含砾石土壤降雨入渗过程进行了数值模拟,以期深入理解含砾石土壤中的水土过程.研究结果表明,土壤中砾石的存在能够导致土壤水分饱和度增加,使得土壤总入渗量以及降雨入渗深度降低.含砾石土壤中存在一个陡的湿润锋面,在湿润锋面上土壤水分饱和度急剧下降.MINC组件可以很好地模拟含砾石土壤降雨入渗过程,其对含砾石土壤湿润锋和土壤含水率变化的模拟值与实测值吻合较好.降雨期间土壤水分饱和度沿土壤剖面的变化可用来解释含砾石土壤降雨入渗深度降低的原因.  相似文献   

降雨入渗补给地下水数值模拟研究     

何渊 《中国煤炭地质》2014,(7):36-41

针对在地下水资源评价中入渗补给量采用经验估算存在较大误差的问题,以神东矿区为例,在广泛调查矿区包气带岩性结构并结合野外取样、室内参数测定的基础上,采用数值模拟的方法建立包气带水分运移数值模拟模型,定量模拟矿区内不同地段降雨入渗强度,探讨影响降雨入渗强度的主要因素,计算得出研究区降雨入渗系数大致在0.18~0.27,分析认为影响降雨入渗强度的因素有降雨量、潜水埋深、包气带岩性等。其中在研究区广泛分布的风积沙对地下水资源起到了一定的保护作用。  相似文献   

A two‐dimensional model of hydraulic performance of stormwater infiltration systems     

D. Browne  A. Deletic  G. M. Mudd  T. D. Fletcher 《水文研究》2013,27(19):2785-2799

Stormwater infiltration systems are a popular method for urban stormwater control. They are often designed using an assumption of one‐dimensional saturated outflow, although this is not very accurate for many typical designs where two‐dimensional (2D) flows into unsaturated soils occur. Available 2D variably saturated flow models are not commonly used for design because of their complexity and difficulties with the required boundary conditions. A purpose‐built stormwater infiltration system model was thus developed for the simulation of 2D flow from a porous storage. The model combines a soil moisture–based model for unsaturated soils with a ponded storage model and uses a wetting front‐tracking approach for saturated flows. The model represents the main physical processes while minimizing input data requirements. The model was calibrated and validated using data from laboratory 2D stormwater infiltration trench experiments. Calibrations were undertaken using five different combinations of calibration data to examine calibration data requirements. It was found that storage water levels could be satisfactorily predicted using parameters calibrated with either data from laboratory soils tests or observed water level data, whereas the prediction of soil moistures was improved through the addition of observed soil moisture data to the calibration data set. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

On the prediction of the Toce alpine basin floods with distributed hydrologic models     

Nicola Montaldo  Giovanni Ravazzani  Marco Mancini 《水文研究》2007,21(5):608-621

With the objective of improving flood predictions, in recent years sophisticated continuous hydrologic models that include complex land‐surface sub‐models have been developed. This has produced a significant increase in parameterization; consequently, applications of distributed models to ungauged basins lacking specific data from field campaigns may become redundant. The objective of this paper is to produce a parsimonious and robust distributed hydrologic model for flood predictions in Italian alpine basins. Application is made to the Toce basin (area 1534 km²). The Toce basin was a case study of the RAPHAEL European Union research project, during which a comprehensive set of hydrologic, meteorological and physiographic data were collected, including the hydrologic analysis of the 1996–1997 period. Two major floods occurred during this period. We compare the FEST04 event model (which computes rainfall abstraction and antecedent soil moisture conditions through the simple Soil Conservation Service curve number method) and two continuous hydrologic models, SDM and TDM (which differ in soil water balance scheme, and base flow and runoff generation computations). The simple FEST04 event model demonstrated good performance in the prediction of the 1997 flood, but shows limits in the prediction of the long and moderate 1996 flood. More robust predictions are obtained with the parsimonious SDM continuous hydrologic model, which uses a simple one‐layer soil water balance model and an infiltration excess mechanism for runoff generation, and demonstrates good performance in both long‐term runoff modelling and flood predictions. Instead, the use of a more sophisticated continuous hydrologic model, the TDM, that simulates soil moisture dynamics in two layers of soil, and computes runoff and base flow using some TOPMODEL concepts, does not seem to be advantageous for this alpine basin. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Assessing the impact of the hydraulic properties of a crusted soil on overland flow modelling at the field scale     

Nane Chahinian  Marc Voltz  Roger Moussa  Gwenn Trotoux 《水文研究》2006,20(8):1701-1722

Soil surface crusts are widely reported to favour Hortonian runoff, but are not explicitly represented in most rainfall‐runoff models. The aim of this paper is to assess the impact of soil surface crusts on infiltration and runoff modelling at two spatial scales, i.e. the local scale and the plot scale. At the local scale, two separate single ring infiltration experiments are undertaken. The first is performed on the undisturbed soil, whereas the second is done after removal of the soil surface crust. The HYDRUS 2D two‐dimensional vertical infiltration model is then used in an inverse modelling approach, first to estimate the soil hydraulic properties of the crust and the subsoil, and then the effective hydraulic properties of the soil represented as a single uniform layer. The results show that the crust hydraulic conductivity is 10 times lower than that of the subsoil, thus illustrating the limiting role the crust has on infiltration. Moving up to the plot scale, a rainfall‐runoff model coupling the Richards equation to a transfer function is used to simulate Hortonian overland flow hydrographs. The previously calculated hydraulic properties are used, and a comparison is undertaken between a single‐layer and a double‐layer representation of the crusted soil. The results of the rainfall‐runoff model show that the soil hydraulic properties calculated at the local scale give acceptable results when used to model runoff at the plot scale directly, without any numerical calibration. Also, at the plot scale, no clear improvement of the results can be seen when using a double‐layer representation of the soil in comparison with a single homogeneous layer. This is due to the hydrological characteristics of Hortonian runoff, which is triggered by a rainfall intensity exceeding the saturated hydraulic conductivity of the soil surface. Consequently, the rainfall‐runoff model is more sensitive to rainfall than to the subsoil's hydrodynamic properties. Therefore, the use of a double‐layer soil model to represent runoff on a crusted soil does not seem necessary, as the increase of precision in the soil discretization is not justified by a better performance of the model. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Efficient stochastic analysis of unsaturated slopes subjected to various rainfall intensities and patterns     

《地学前缘(英文版)》2023,14(1):101490

Rainfall infiltration poses a disastrous threat to the slope stability in many regions around the world. This paper proposes an extreme gradient boosting (XGBoost)-based stochastic analysis framework to estimate the rainfall-induced slope failure probability. An unsaturated slope under rainfall infiltration in spatially varying soils is selected in this study to investigate the influences of the spatial variability of soil properties (including effective cohesion c′, effective friction angle φ′ and saturated hydraulic conductivity k_s), as well as rainfall intensity and rainfall pattern on the slope failure probability. Results show that the proposed framework in this study is capable of computing the failure probability with accuracy and high efficiency. The spatial variability of k_s cannot be overlooked in the reliability analysis. Otherwise, the rainfall-induced slope failure probability will be underestimated. It is found that the rainfall intensity and rainfall pattern have significant effect on the probability of failure. Moreover, the failure probabilities under various rainfall intensities and patterns can be easily obtained with the aid of the proposed framework, which can provide timely guidance for the landslide emergency management departments.  相似文献   

地震与强降雨作用下堆积体滑坡变形破坏机理及防治方案分析     

胡爱国  周伟 《中国地质灾害与防治学报》2022,33(1):27-34

位于西南山地堆积体滑坡常受到地震和强降雨的双重作用,查明此类滑坡变形破坏机理是地质灾害防治和风险防控的基础。文章的研究对象是鲜水河断裂带附近的炉霍县马居滑坡。研究表明,地震作用对位于斜坡地带堆积体滑坡体结构损伤明显,不但使滑坡整体稳定性下降,还促使坡体内裂隙大量发育,利于降雨入渗,进一步恶化滑坡的水文地质条件。强降雨形成的大规模洪水和泥石流下切坡脚沟道,牵引滑坡体整体向下。长历时强降雨入渗影响坡体稳定性,且在降雨结束后较长时间持续影响坡体稳定性。因此,对此类滑坡防治的对策应考虑坡脚防护和抗滑支挡设置。在对防治方案的有效性分析后,表明防护方案在极端条件下仍然能保障安全性,达防治和风险管控的目的。  相似文献