Analysis on the sources of mercury in soils in the Chengdu Basin, China     

Limin REN Bing QIN Wenchun TANG Zhendong MA Yikeng HU 《中国地球化学学报》2006,25(B08):10-10

Mercury is a pollutant of concern due to its toxic and bioaccumulative properties. Studies on the distribution and hazard of mercury in the environment are mainly focused on its forms, toxicity and the environment standard, and progresses and results have been achieved. But these studies in the past were concentrated on the scales of laboratory or smaller districts merely, such as a small unit of mineral area, vegetable base, paddy field, lake, etc. Multi-target regional geochemical survey carried out by China Geological Survey from the 1990s to now is a fundamental and commonweal geological survey, large-scale and systematical inquisition and research were conducted in 19 provinces （or municipalities directly under the Central Government） in the eastern overlay region of China, and the purpose is to provide the basic geochemical data for national economic construction, adjustment of industrial and agricultural structures and sustainable social development. Geochemical studies aim at investigating soils in these regions and 52 elements have been tested, producing a great amount of data at the same time. Methods： based on the data from 3061 samples of surface soil and 832 samples of deep soil from the project of multi-purpose geochemical survey in the Chengdu Basin, Sichuan, China, this paper describes the correlation relationship between Hg and other 48 elements and their spatial distribution in surface and deep soils of these areas by applying the method of linear regression and factor analysis.  相似文献   

保持主分量变换结果信息的量化方法     

李超群朱宝山  朱述龙 《测绘学院学报》2005,22(3):175-177

从主分量变换后图像信息保持的角度出发，充分分析了变换结果存储导致信息丢失的原因；同时以直接线性变换为基础，提出了另外两种新的对主分量变换结果进行量化的方法；并对这3种方法进行了充分的比较，文中最后以信息熵为指标评价了3种方法的优劣。  相似文献   

北京54坐标转换至WGS-84坐标的方法   总被引：9，自引：0，他引：9  

蔡昌盛高井祥  郑南山张华海 《四川测绘》2005,28(3):125-127,134

本文首先阐述了北京54坐标转换至WGS-84坐标的意义,介绍了北京54坐标转换至WGS-84坐标的实现过程及其方法.最后通过计算江苏省北京54坐标数据和C级GPS网数据对两种坐标转换方法进行了比较分析,并得出了有益的结论.  相似文献   

水库下游河流再造床过程中的河岸侵蚀   总被引：3，自引：0，他引：3       下载免费PDF全文

张春燕  陈立  张俊勇  王志国 《水科学进展》2005,16(3):356-360

根据实测河道地形资料,分析了水库下游河床演变中的河岸侵蚀现象,包括不同横向边界约束条件、不同床沙组成和不同河型河段的河岸侵蚀的特征及规律。结果表明:①水库下游均会有河岸侵蚀发生,但初期一般以下切为主,后期以展宽为主。②对于横向边界约束较强的河段,河岸侵蚀相对较弱;相反,则河岸坍塌严重,河岸侵蚀强烈;③对不同的河床组成和边滩组成的河段:河床较粗特别是形成抗冲粗化层,且边滩组成较细的河段,河岸侵蚀现象非常剧烈;河床组成较细的河段,如果边滩抗冲性较强,则河岸侵蚀现象相对较弱,如果滩地组成较细、容易坍塌,河岸侵蚀也会较强;④不同的河型有着不同的河岸侵蚀现象。分汊河段以主汊为主;游荡段的游荡特性在初期受到抑制;弯曲河段的撇弯切滩现象较普遍。  相似文献   

基于线性四叉树的全球离散格网索引   总被引：8，自引：0，他引：8  

白建军  赵学胜  陈军 《武汉大学学报(信息科学版)》2005,30(9):805-808

将四元三角剖分的三角形格网组织成四叉树剖分的菱形块格网,以菱形块单元来进行数据的组织索引,通过线性四叉树成熟的Morton编码作为关键字来标识查找菱形块,并在此基础上经过改进来索引三角形格网、进行邻域搜索。  相似文献   

T市平面控制网的扩建及与1954北京坐标系的关系     

覃辉 《测绘科学与工程》2005,25(4):40-44

本文论证了58T市独立坐标系与87T市独立坐标系的区别，使用T市扩建二等GPS网的平差成果，给出了87T市独立坐标系精确变换到1954北京坐标系的方法与参数。  相似文献   

登陆台风Winnie(1997)的数值模拟研究Ⅱ:结构演变特征分析   总被引：26，自引：14，他引：26  

朱佩君  陈敏  陶祖钰  王洪庆 《气象学报》2002,60(5):560-567

利用“登陆台风Winnie(1997)的数值模拟研究Ⅰ”的数值模拟结果 ,讨论了Winnie(1997)台风在登陆后变性阶段和重新加强阶段的环流、动力和热力结构特征以及演变过程。在结构上 ,变性阶段主要完成了从基本对称的垂直分布到斜压非对称分布的转换。在变性阶段的初期 ,热力和动力以及环流结构上都还留有一些热带气旋的影子 ,但是在强度和空间分布上已经发生了明显的变化 ,同时也反映了台风登陆后由于下垫面的变化 ,使来自海面的暖湿水汽输送呈明显的不对称分布 ,导致热力结构上的不对称分布。到变性阶段的后期 ,无论从环流结构还是动力结构上 ,都形成了和冷暖锋相对应的倾斜分布特征 ,并且和冷空气对应的锋区在低层侵入到气旋中心 ,使热带气旋经过变性阶段最终演变为锋面气旋。在重新发展阶段 ,通过与西风带低槽的结合 ,变性后的气旋获得了重新发展的机会。并且在此过程中得到了一次来自附近洋面的高暖湿能量的输送 ,也为发展提供了有利的条件 ,使变性后的气旋进一步加强为成熟的温带气旋。  相似文献   

改进的切线性模式对一个边界层模式变分资料同化的改善   总被引：7，自引：0，他引：7  

Zhu Jiang  Wang Hui  Masafumi Kamachi 《大气科学进展》2002,19(4):563-582

大气、海洋中边界层物理过程的强非线性会对切线性模式近似（尤其是当积分时间长时）有较大的影响，从而给相应的4维变分资料同化问题的求解造成困难。本构造了Mellor-Yamada湍流封闭模式（level 2.5)的一个改进的切线性模式，相比通常的切线性模式和简化的切线性模式可以提高对非线性扰动的逼近。利用这个改进的切线性模式的伴随模式分别进行了1到7天的变分资料同化试验，得到了满意的结果。而用通常的伴随模式和简化的伴随模式都无法得到令人满意的结果。  相似文献   

Seismic response of self‐centring hysteretic SDOF systems     

Constantin Christopoulos  Andr Filiatrault  Bryan Folz 《地震工程与结构动力学》2002,31(5):1131-1150

The seismic response of single‐degree‐of‐freedom (SDOF) systems incorporating flag‐shaped hysteretic structural behaviour, with self‐centring capability, is investigated numerically. For a SDOF system with a given initial period and strength level, the flag‐shaped hysteretic behaviour is fully defined by a post‐yielding stiffness parameter and an energy‐dissipation parameter. A comprehensive parametric study was conducted to determine the influence of these parameters on SDOF structural response, in terms of displacement ductility, absolute acceleration and absorbed energy. This parametric study was conducted using an ensemble of 20 historical earthquake records corresponding to ordinary ground motions having a probability of exceedence of 10% in 50 years, in California. The responses of the flag‐shaped hysteretic SDOF systems are compared against the responses of similar bilinear elasto‐plastic hysteretic SDOF systems. In this study the elasto‐plastic hysteretic SDOF systems are assigned parameters representative of steel moment resisting frames (MRFs) with post‐Northridge welded beam‐to‐column connections. In turn, the flag‐shaped hysteretic SDOF systems are representative of steel MRFs with newly proposed post‐tensioned energy‐dissipating connections. Building structures with initial periods ranging from 0.1 to 2.0s and having various strength levels are considered. It is shown that a flag‐shaped hysteretic SDOF system of equal or lesser strength can always be found to match or better the response of an elasto‐plastic hysteretic SDOF system in terms of displacement ductility and without incurring any residual drift from the seismic event. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions     

M. C. Griffith  A. Kawano  R. F. Warner 《地震工程与结构动力学》2002,31(10):1879-1888

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献