排序方式： 共有88条查询结果，搜索用时 187 毫秒
51.
本文介绍了“工程结构性态抗震设计和控制研究”项目的立项背景、目标、所开展的主要工作、取得的成果及研究成果的社会效益,并展望了该领域研究的未来工作。 相似文献
52.
对基于位移的方钢管混凝土柱抗震设计方法进行了研究：介绍了基于位移抗震设计方法的概念、原理和设计的一般过程；探讨了方钢管混凝土柱的等效刚度、等效阻尼等设计中的关键问题，并确定了参数的具体取值；最后对方钢管混凝土柱进行了具体的基于位移的抗震设计，并研究了主要参数的影响。结果表明：在通常范围内，第二阶段刚度系数对滞回阻尼比影响不大；随着轴压比的增加，钢管壁厚度增加，柱延性系数增加；随着截面尺寸增加，钢管壁厚度减小，屈服弯矩也减小。 相似文献
53.
A general framework for multi-criteria optimal design is presented which is well suited for performance-based design of structural systems operating in an uncertain dynamic environment. A decision theoretic approach is used which is based on aggregation of preference functions for the multiple, possibly conflicting, design criteria. This allows the designer to trade off these criteria in a controlled manner during the optimization. Reliability-based design criteria are used to maintain user-specified levels of structural safety by properly taking into account the uncertainties in the modelling and seismic loads that a structure may experience during its lifetime. Code-based requirements are also easily incorporated into this optimal design process. The methodology is demonstrated with a simple example involving the design of a three-storey steel-frame building for which the ground motion uncertainty is characterized by a probabilistic response spectrum which is developed from available attenuation formulas and seismic hazard models. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
54.
The seismic design provisions of most building codes in the United States specify ground motion parameters for various regions of the country and provide simple formulae to determine a distribution of lateral forces for which the structure should be designed. Although the code provisions are very simple to use, they oversimplify a complex problem and are based on many implicit assumptions which many designers may not appreciate. Furthermore, the reliability of the final design is not easily determined. This paper describes a reliability-based seismic design procedure for building structures. It is a performance-based design procedure which requires the designer to verify that a particular structural design satisfies displacement-based performance criteria. An equivalent system methodology and uniform hazard spectra are used to evaluate structural performance. The performance criteria are expressed in probabilistic terms, and deterministic design-checking equations are derived from these criteria. The design-checking equations incorporate design factors (analogous to load and resistance factors) which account for the uncertainty in the seismic hazard, the uncertainty in predicting site soil effects, and the approximate nature of the simplified models of the structure. The alternative procedure should enable designers to achieve code-specified target performance objectives for moderate and severe levels of earthquake excitation. 相似文献
55.
基于建筑性能的非结构构件抗震设计研究 总被引：2，自引：0，他引：2
针对非结构构件在地震中破坏的现象、震害情况,分析破坏原因,给出了非结构构件的抗震设防目标。基于建筑物性能的基本思想,给出了非结构构件的性能设计要求;讨论了非结构构件和附属设备的抗震设计计算原则。对建筑的非结构构件提出了相应的抗震设防技术措施,以提高其抗震能力。 相似文献
56.
57.
An aspect of seismic design of bridges that has hardly received proper attention so far is the appropriate selection of joint gaps. End gaps define the boundary conditions of the bridge and affect its dynamic response; their proper design can lead to an improved structural performance under dynamic actions. The idea of the ‘Dynamic Intelligent Bridge’ is explored here, wherein current bridge joints that have a fixed width are substituted by variable-width joints and, under seismic loading, the joint gap is optimised either with a one-off adjustment, or continuously (in real time) through semi-active control. In all cases, a novel device is used that permits this improved behaviour of the joints, the moveable shear key (MSK), a device for blocking the movement of the bridge deck, which has the possibility to slide, hence varying the size of the existing joint gap. In this context, the effect of gap size on the seismic response of bridges is assessed herein and a methodology is put forward for optimising this size, using a number of criteria such as maintaining the functionality of the bridge for moderate earthquakes, and ensuring the safety of the bridge and its users under earthquakes stronger than that used for design. 相似文献
58.
地震作用下,若斜拉桥主塔发生损伤,将使整体损伤风险明显提高。因此对斜拉桥主塔进行地震易损性分析来评定主塔的抗震能力,进而评估斜拉桥主塔在设计基准期内的地震损伤风险,具有重要的工程和经济意义。本文通过SAP2000有限元分析软件对某斜拉桥主塔进行了纵横向的地震易损性及危险性分析,结合地震易损性和危险性分析推导出概率地震风险函数,进而开展了斜拉桥的概率地震风险分析。分析结果证明,在100年设计基准期内,纵桥向或横桥向地震作用下,本文斜拉桥"H"型主塔均满足E3水准抗震设防要求。 相似文献
59.
Earthquakes are generally clustered, both in time and space. Conventionally, each cluster is made of foreshocks, the mainshock, and aftershocks. Seismic damage can possibly accumulate because of the effects of multiple earthquakes in one cluster and/or because the structure is unrepaired between different clusters. Typically, the performance-based earthquake engineering (PBEE) framework neglects seismic damage accumulation. This is because (i) probabilistic seismic hazard analysis (PSHA) only refers to mainshocks and (ii) classical fragility curves represent the failure probability in one event, of given intensity, only. However, for life cycle assessment, it can be necessary to account for the build-up of seismic losses because of damage in multiple events. It has been already demonstrated that a Markovian model (i.e., a Markov chain), accounting for damage accumulation in multiple mainshocks, can be calibrated by maintaining PSHA from the classical PBEE framework and replacing structural fragility with a set of state-dependent fragility curves. In fact, the Markov chain also works when damage accumulates in multiple aftershocks from a single mainshock of known magnitude and location, if aftershock PSHA replaces classical PSHA. Herein, this model is extended further, developing a Markovian model that accounts, at the same time, for damage accumulation: (i) within any mainshock–aftershock seismic sequence and (ii) among multiple sequences. The model is illustrated through applications to a series of six-story reinforced concrete moment-resisting frame buildings designed for three sites with different seismic hazard levels in Italy. The time-variant reliability assessment results are compared with the classical PBEE approach and the accumulation model that only considers mainshocks, so as to address the relevance of aftershocks for life cycle assessment. 相似文献
60.
In performance-based seismic design, as adopted by several building codes worldwide, the structural performance is verified against ground motions that have predetermined exceedance return periods at the site of interest. Such a return period is evaluated by means of probabilistic seismic hazard analysis (PSHA), and the corresponding ground motion is often represented by the uniform hazard spectrum (UHS). The structural performance for ground motions larger than those considered in this design approach is, typically, not explicitly controlled under the assumption that they are sufficiently rare. On one hand, this does not achieve uniform safety at sites characterized by different design ground motions corresponding to the same return period; on the other hand, exceedances of the design spectra are systematically observed over large areas, for example in Italy. The latter issue is because of the nature of UHS, the exceedance of which is likely-to-almost-certain when the construction site is in the epicentral area of moderate-to-high magnitude earthquakes (ie, the design spectrum may be not conservative at these locations), especially if PSHA is based on seismic source zones. The former is partially because of the systematic difference of ground motions for return periods larger than the design one at the different sites. Quantification of the expected ground motion given the exceedance of the design ground motions (ie, the recently introduced as the expected peak-over-threshold or POT) can be of help in quantitatively assessing these issues. In the study, a procedure to compute the POT distribution is derived first; second, POT spectra are introduced and used to help understanding why and how seismic structural reliability of code-conforming structures decreases as the seismic hazard of the site increases; third, expected and 95th percentile POT maps are shown for Italy to discuss how much high hazard sites are exposed to much larger peak-over-threshold with respect to mid-hazard and low-hazard sites; finally the POT is discussed with respect to the slope of the hazard curve (in log-log scale) at the threshold, a known proxy for ground motion beyond design. All data presented in the maps are made available for the interested reader as a supplemental archive. 相似文献