共查询到20条相似文献，搜索用时 532 毫秒
1.
Nonlinear response history analyses and use of strong ground motion data including near-field effects has become a common practice in both performance based design of tall buildings and design of base-isolated buildings. On the other hand, ordinary buildings are commonly analysed via response spectrum analysis following the rules of conventional seismic codes, most of which do not take near-field effects into account. This study evaluates the necessity and the adequacy of near-source factors for ordinary fixed-base buildings that are not specifically classified as tall, by comparing dynamic responses of 3, 8, and 15-story benchmark buildings obtained via(1) linear time history analyses using 220 record components from 13 historical earthquakes and 45 synthetic earthquake records of different magnitudes and fault distances and(2) response spectrum analyses in accordance with the Turkish Earthquake Code 2007-representing seismic codes not taking near-field effects into account- and the Uniform Building Code 1997 which takes near-field effects into account via near-source factors that amplify design response spectrum. It is shown that near-source factors are crucial for the safe design of not-so-tall ordinary fixed-base buildings but those defined in UBC97 may still not be adequate for those located in the vicinity of the fault. 相似文献
2.
IntroductionAt present, the proper design and construction of buildings for earthquake-resistance is the most effective measure to mitigate the earthquake damage. In a broad sense, the earthquake resistance design should include the following seven contents:1) Determining the seismic design criteria Determining the seismic design goals3) Determining the seismic design parameters (intensity or ground motion) and their numerical values4) Determining the category of importance for buildings and … 相似文献
3.
Modified consecutive modal pushover procedure for seismic investigation of one-way asymmetric-plan tall buildings 总被引：1，自引：1，他引：0
The effects of higher modes and torsion have a significant impact on the seismic responses of asymmetric-plan tall buildings.A consecutive modal pushover(CMP) procedure is one of the pushover methods that have been developed to consider these effects.The aim of this paper is to modify the(CMP) analysis procedure to estimate the seismic demands of one-way asymmetric-plan tall buildings with dual systems.An analysis of 10-,15-and 20-story asymmetric-plan buildings is carried out,and the results from the modified consecutive modal pushover(MCMP) procedure are compared with those obtained from the modal pushover analysis(MPA) procedure and the nonlinear time history analysis(NLTHA).The MCMP estimates of the seismic demands of one-way asymmetric-plan buildings demonstrate a reasonable accuracy,compared to the results obtained from the NLTHA.Furthermore,the accuracy of the MCMP procedure in the prediction of plastic hinge rotations is better than the MPA procedure.The new pushover procedure is also more accurate than the FEMA load distribution and the MPA procedure. 相似文献
4.
Wang Yayong 《地震工程与工程振动(英文版)》2008,7(3):255-262
Many different types of buildings were severely damaged or collapsed during the May 12, 2008 Great Wenchuan Earthquake. Based on survey data collected in regions that were subjected to moderate to severe earthquake intensities, a comparison between the observed building damage, and the three earthquake performance objectives and seismic conceptual design principles specified by the national ＂Code for Seismic Design of Buildings GB50011-2001,＂ was carried out. Actual damage and predicted damage for a given earthquake level for different types of structures is compared. Discussions on seismic conceptual design principles, with respect to multiple defense lines, strong column-weak beam, link beam of shear walls, ductility detailing of masonry structures, exits and staircases, and nonstructural elements, etc. are carried out. Suggestions for improving the seismic design of structures are also proposed. It is concluded that the seismic performance objectives for three earthquake levels, i.e., ＂no failure under minor earthquake level, ＂＂repairable damage under moderate earthquake level＂ and ＂no collapse under major earthquake level＂ can be achieved if seismic design principles are carried out by strictly following the code requirements and ensuring construction quality. 相似文献
5.
AshutoshBagchi 《地震工程与工程振动(英文版)》2004,3(2):223-236
This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames,while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design. 相似文献
6.
Aman Mwafy 《地震工程与工程振动(英文版)》2011,10(1):115-127
To verify the seismic design response factors of high-rise buildings, five reference structures, varying in height from 20- to 60-stories, were selected and designed according to modern design codes to represent a wide range of concrete wall structures. Verified fiber-based analytical models for inelastic simulation were developed, considering the geometric nonlinearity and material inelasticity of the structural members. The ground motion uncertainty was accounted for by employing 20 earthquake records representing two seismic scenarios, consistent with the latest understanding of the tectonic setting and seismicity of the selected reference region (UAE). A large number of Inelastic Pushover Analyses (IPAs) and Incremental Dynamic Collapse Analyses (IDCAs) were deployed for the reference structures to estimate the seismic design response factors. It is concluded that the factors adopted by the design code are adequately conservative. The results of this systematic assessment of seismic design response factors apply to a wide variety of contemporary concrete wall buildings with various characteristics. 相似文献
7.
Artificial ground motion compatible with specified ground shaking peaks and target response spectrum 总被引：1，自引：0，他引：1
1 Introduction Time history analysis is usually needed not only for the seismic design of important structures, such as nuclear plants, large concrete dams and super high-rise buildings, but also for seismic performance based design. Performance-based design requires tha knowledge of the entire process of nonlinear seismic responses of structures be obtained, which depends on the ground motion time history as input for this analysis. However, because the observed strong-motion recordings are l… 相似文献
8.
Hemchandra Chaulagain Hugo Rodrigues Enrico Spacone Ramesh Guragain Radhakrishna Mallik Humberto Varum 《地震工程与工程振动(英文版)》2014,13(3):455-470
Most current seismic design includes the nonlinear response of a structure through a response reduction factor(R). This allows the designer to use a linear elastic force-based approach while accounting for nonlinear behavior and deformation limits. In fact, the response reduction factor is used in modern seismic codes to scale down the elastic response of a structure. This study focuses on estimating the actual ‘R' value for engineered design/construction of reinforced concrete(RC) buildings in Kathmandu valley. The ductility and overstrength of representative RC buildings in Kathmandu are investigated. Nonlinear pushover analysis was performed on structural models in order to evaluate the seismic performance of buildings. Twelve representative engineered irregular buildings with a variety of characteristics located in the Kathmandu valley were selected and studied. Furthermore, the effects of overstrength on the ductility factor, beam column capacity ratio on the building ductility, and load path on the response reduction factor, are examined. Finally, the results are further analyzed and compared with different structural parameters of the buildings. 相似文献
9.
Introduction In recent years some big cities in China commonly build subways in central urban areas to improve crowded surface transportation, and the subways usually are large-scale group cavities composed by two parallel cavities. Construction of large-scale group cavities will certainly affect the design ground motion near the cavities, and further affect seismic safety of the existing build-ings nearby. So it is of significance to estimate this effect on seismic design of the buildings. H… 相似文献
10.
Yanju Peng Yuejun Lu Jiaquan Yan Rongyu Tang Junqin Wang Jiagang Li 《地震工程与工程振动(英文版)》2010,9(2):223-231
This paper analyzes the seismicity in Bohai Sea,introducing a shape factor K to characterize the seismic risk distribution in sub-regions of the sea. Based on the seismic design ground motions for 46 platforms located in the Bohai Sea,a statistical analysis was performed for different peak ground acceleration (PGA) ratios at two different probability levels. In accordance with the two-stage design method,a scheme of two seismic design levels is proposed,and two seismic design objectives are established respectively for the strength level earthquake and the ductility level earthquake. By analogy with and comparison to the Chinese seismic design code for buildings,it is proposed that the probability level for the strength level earthquake and ductility level earthquake have a return period of 200 and 1000 - 2500 years,respectively. The validity of these proposed values is discussed. Finally,the PGAs corresponding to these two probability levels are calculated for different sub-regions of the Bohai Sea. 相似文献
11.
12.
13.
M. N. French R. L. Bras W. F. Krajewski 《Stochastic Environmental Research and Risk Assessment (SERRA)》1992,6(1):27-45
A procedure for short-term rainfall forecasting in real-time is developed and a study of the role of sampling on forecast ability is conducted. Ground level rainfall fields are forecasted using a stochastic space-time rainfall model in state-space form. Updating of the rainfall field in real-time is accomplished using a distributed parameter Kalman filter to optimally combine measurement information and forecast model estimates. The influence of sampling density on forecast accuracy is evaluated using a series of a simulated rainfall events generated with the same stochastic rainfall model. Sampling was conducted at five different network spatial densities. The results quantify the influence of sampling network density on real-time rainfall field forecasting. Statistical analyses of the rainfall field residuals illustrate improvement in one hour lead time forecasts at higher measurement densities. 相似文献
14.
15.
《中国科学:地球科学(英文版)》2014,(3)
正SCIENCE CHINA Earth Sciences,an academic journal cosponsored by the Chinese Academy of Sciences and the National Natural Science Foundation of China,and published by Science China Press and Springer,is committed to publishing high-quality,original results in both basic and applied research. 相似文献
16.
《国际泥沙研究》2014,(4)
正Director:Shangfu Kuang,China Vice-directors:Chunhong Hu,China Duihu Ning,China Guangquan Liu,China The International Research and Training Center on Erosion and Sedimentation(IRTCES)was jointly set up by the Government of China and UNESCO on July 21,1984.It aims at the promotion of international exchange of knowledge and cooperation in the studies of erosion and 相似文献
17.
18.
20.
《地震工程与工程振动(英文版)》2014,(4)
正This journal is established by the Institute of Engineering Mechanics(IEM),China Earthquake Administration,to promote scientific exchange between Chinese and foreign scientists and engineers so as to improve the theory and practice of earthquake hazards mitigation,preparedness,and recovery.To accomplish this purpose,the journal aims to attract a balanced number of papers between Chinese and 相似文献