滑坡治理中格构锚固结构的解析解分析   总被引：17，自引：0，他引：17  

许英姿  唐辉明 《地质科技情报》2002,21(3):89-93

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中  相似文献   

不同参考椭球体的GIS数据转换探讨     

杨友长 《安徽地质》2002,12(3):225-229

通过一项工程和不同参考椭球转换软件的实现过程,探讨了不同参考椭球GIS数据的转换问题.首先介绍了转换的数学模型和软件的实现过程.其次介绍了几种转换方法,并通过一个工程实例介绍了具体的操作步骤.最后对这个工程实例进行了可行性分析.  相似文献   

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28   总被引：1，自引：0，他引：1  

Jean S. Kane 《Geostandards and Geoanalytical Research》2002,26(1):7-29

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.  相似文献   

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1   总被引：2，自引：0，他引：2  

Takashi Okai  Atsushi Suzuki  Hodaka Kawahata  Shigeru Terashima  Noboru Imai 《Geostandards and Geoanalytical Research》2002,26(1):95-99

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.  相似文献   

Chemical equilibria of thermal waters for the application of geothermometers from the Guanzhong basin, China     

Zheng Xilai  Halldor Armannsson  Li Yongle  Qiu Hanxue 《Journal of Volcanology and Geothermal Research》2002,113(1-2)

In this study, representative samples from thermal wells and springs were chemically analyzed and geothermometers were used to calculate the deep temperatures of geothermal reservoirs on the basis of water–mineral equilibrium. In some cases, however, the chemical components are not in equilibrium with the minerals in the reservoir. Therefore, log(Q/K) diagrams are used to study the chemical equilibrium for the minerals that are likely to participate. The Na–K–Mg triangular diagram is also applied to evaluate the equilibrium of water with reservoir rocks. Standard curves at the reference temperatures are prepared to reveal which type of silica geothermometer is appropriate for the specified condition. This study shows that water samples from geothermal wells W9 and W12 are in equilibrium with the selective minerals, and chalcedony may control the fluid–silica equilibrium. It is estimated that there is an exploitable low-temperature reservoir with possible temperatures of 80–90°C in the Guanzhong basin.  相似文献   

高层钢框架-支撑结构二阶非线性随机地震响应分析   总被引：1，自引：0，他引：1  

陈兰  汤海波  梁启智 《地震工程与工程振动》2002,22(3):170-174

针对常用的高层钢框架－支撑结构，考虑材料非线性和几何非线性，建立了框架部分、支撑部分的二阶动力分析模型。用等效线性方法对结构进行非线性随机地震响应分析，结合工程算例，论述不同场地土、不同层数、不同支撑情况下，二阶效应对结构地震响应统计量的影响。  相似文献   

国际地磁参考场在我国地磁基础研究中的应用     

王文 《国际地震动态》2002,(5):4-6,7

国际地磁参考场资料在我国得到广泛应用。利用国际地磁参考场资料，我国学者研究了高斯分析、地球磁场模型及其源场可能位置、重磁关系、核幔耦合、地磁场能量、地球非偶极子磁场西向漂移等。在绘制中国地磁等值图中也利用了某些国际地磁参考场资料。  相似文献   

基于应变模态法识别刚架桥梁的损伤   总被引：6，自引：0，他引：6  

杜思义  陈淮 《世界地震工程》2003,19(2):112-115

基于应变模态方法，对刚架桥的损伤识别进行了研究。通过对某刚架桥在不同损伤工况下的数值仿真计算，探讨了应变模态方法用于刚架桥损伤识别的能力。计算结果表明：利用应变模态差曲线能比较准确地识别出刚架桥的损伤位置；应变模态差曲线在刚架桥损伤单元处的跳跃幅值随单元损伤程度的增加而增大，依此可定性地识别出刚架桥的损伤程度。  相似文献   

空腔结构复合填充墙-钢框架抗侧力性能试验研究   总被引：4，自引：0，他引：4  

管克俭  李捍无  彭少民 《世界地震工程》2003,19(3):73-77

通过空腔结构复合填充墙-钢框架和同尺寸纯钢框架的对比试验，分析了空腔结构复合填充墙-钢框架的抗侧力性能和滞回性能。研究结果证明空腔结构复合填充墙是一种理想的抗侧力体系，可用于多层或小高层钢结构住宅，作为结构的抗侧力构件。  相似文献   

Steel frames with bracing mechanism and hysteretic dampers     

M. C. Phocas  A. Pocanschi 《地震工程与结构动力学》2003,32(5):811-825

A new earthquake resistant structural system for multi‐storey frame structures, based on a dual function of its bracing components, is developed. This consists of a hysteretic damper device and a cross‐bracing mechanism with a kinetic closed circuit, working only in tension, so that cable members can be used for this purpose. Solutions are presented regarding the connections' design of three types of structural frame system, that are concerned throughout the study: braced moment free frame, braced moment resisting frame with moment free supports, and with moment resisting supports. The dynamic behaviour of the system is investigated on the basis of an SDOF model, and based on the response spectra method an approximate design approach of the controlled structures is shown. From the time history analysis of the structural systems for the El Centro earthquake the areas of appropriate stiffness relations of the frames to the hysteretic dampers and the cable braces are deduced, so that the energy dissipation of the system may be controlled by the damper‐cable bracing mechanism. Based on the results of these studies, a predesign approach is developed for the implementation of the control system in frame structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献