Experimental and numerical studies of rock salt strain hardening     

M. Hamami 《Geotechnical and Geological Engineering》2006,24(5):1271-1292

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.  相似文献   

The log-normal distribution for hydraulic conductivity of compacted clays: Two or three parameters?     

Huaming Zhai  Craig H. Benson 《Geotechnical and Geological Engineering》2006,24(5):1149-1162

Risk and uncertainty assessments for waste containment systems employing clay barriers often include spatial variability in the hydraulic conductivity as part of the analysis. The two-parameter log-normal distribution is often used to describe the spatial variability, but for compacted clays the three-parameter form can be more appropriate. A statistical hypothesis test was developed that can be used to determine if the two- or three-parameter form of the log-normal distribution is more appropriate. The test is based on a likelihood ratio, comparing likelihood functions for the two- and three-parameter forms at their maximums. Likelihood functions are used assuming that a data set can be segregated into a set of distinct groups of hydraulic conductivities. A step-by-step calculation procedure is described and the test is applied to data collected from 45 sites.  相似文献   

Permeability of Hydraulic Fills and Barricade Bricks     

Nagaratnam Sivakugan  Kirralee Rankine  Rudd Rankine 《Geotechnical and Geological Engineering》2006,24(3):661-673

Permeability is one of the most important parameters in the design of hydraulic backfilling of mine stopes. A simple and reproducible method was developed for preparing reconstituted hydraulic fill sample in the laboratory, that is representative of the hydraulic fill in the mine stope, replicating the slurry sedimentation process taking place in the mine. Constant head and falling head permeability tests were carried out on the samples, giving consistent results. A brick permeameter was developed to study the flow characteristics of the porous barricade bricks under one-dimensional flow, simulating the flow conditions in the mine. Three different methods were used to determine the permeability of the brick and the results showed very good agreement. This is the first rational attempt to measure the permeability of the porous barricade bricks that are used to close the horizontal access drives in the mines, thus retaining the hydraulic fill. The measurements show that the permeability of the barricade brick is about two to three orders of magnitude greater than that of the hydraulic fill.  相似文献   

Dynamics and interaction of organic carbon, turbidity and bacteria in a karst aquifer system   总被引：9，自引：8，他引：9  

Michiel Pronk  Nico Goldscheider  Jakob Zopfi 《Hydrogeology Journal》2006,14(4):473-484

The dynamics of organic carbon (OC), turbidity, faecal indicator bacteria and physicochemical parameters was studied in a karst system near Yverdon, Switzerland. Online measurements and sampling were done at a swallow hole draining an agricultural surface (the input), and two groups of springs (the outputs) that often show bacterial contamination. A fluorescent tracer that was injected into the swallow hole during low-flow conditions first arrived at the springs 10–12 days after injection; the total recovery rate was 29%. Previous tracer tests during high-flow conditions gave shorter travel times. After a major rainfall event, a primary turbidity peak was observed at the springs. It coincides with the rising limb of the hydrograph, indicating remobilisation of autochthonous particles from the aquifer. A secondary turbidity peak occurs several days later, suggesting the arrival of allochthonous particles from the swallow hole. Wider peaks of OC and bacteria were observed simultaneously. Applying methods from molecular microbiology (PCR-DGGE) allowed characterisation of the bacterial communities at the swallow hole and the springs. The results demonstrate that the swallow hole is an important source of groundwater contamination, while its contribution to aquifer recharge is insignificant. OC appears to be a better indicator for bacterial contamination than turbidity.  相似文献   

Practical Research of IKONOS-2 Geopositioning and Its Accuracy in Tibet of China     

CHENChujiang LIDeren ZHUQing 《地球空间信息科学学报》2005,8(1):33-38

This paper presents the studies of the refining of IKONOS-2 RPC, the transform of the datum, the mode of the control point distribution and the method of IKONOS stereo triangulation, so that IKONOS imagery can be used to collect the precise geospatial data and produce the large scale map. The transform between the IKONOS-2 image space and the national coordinate system based on the RPC have been developed, and the results of block adjustment with various control schemes in a practical project near Himalayas have been examined and analysed. The encouraging results of high positioning accuracy have been obtained.  相似文献   

黄骅坳陷北大港构造带古近系沙河街组高分辨率层序地层格架及其对储层非均质性的控制   总被引：9，自引：1，他引：9  

范乐元  朱筱敏  宋鹍  朱之春  谢楠 《地层学杂志》2005,29(4):355-361,367

陆相湖盆层序的发育是在湖盆蓄水量周期性变化的条件下实现的。层序发育过程实际上是基准面旋回变化过程中湖泊冲刷沉积作用彼此消长的过程。北大港构造带古近系沙河街组可划分为2个长期基准面旋回、8个中期基准面旋回和43个短期基准面旋回。在等时地层格架内,基于基准面变化过程中的沉积响应及其伴生的可容空间变化的分析,探讨了基准面旋回变化与储层展布及储层非均质性之间的相关关系:基准面旋回的升降变化对储层的非均质性、空间展布以及有利储层的分布等均具有明显的控制作用;短期基准面旋回控制储层砂体内部的非均质模式,中长期基准面旋回控制了储层砂体的层间非均质性特征;在中长期基准面低位处,尤其是在基准面旋回的转换点处,储层发育良好,砂体厚度、展布面积均较大,物性相对较好;而在中长起基准面较高位处,则出现相反的储层特征。  相似文献   

条带开采煤柱稳定性的试验模拟与数值分析——以山东省济宁市太平煤矿为例   总被引：1，自引：0，他引：1  

杨伟峰夏筱红  黄治灿刘汪威 魏永军 《中国煤田地质》2005,17(2):29-31,55

以山东省济宁市太平煤矿为例，采用煤柱模拟试验和数值分析手段，对薄基岩条带开采时所留设煤柱的应力应变状态、煤柱强度结构及煤柱长期稳定性进行了深入的分析与研究，揭示了煤柱稳定性及煤柱应力分布与条采尺寸、采出率、覆岩特征的相互关系，进行了条带煤柱的稳定性评价，为工程实践提供了理论依据。  相似文献   

粉煤灰浸出特性试验研究     

郭建新 《地下水》2005,27(5):405-407

利用浸出试验方法,对火电厂粉煤灰进行浸出特性的测定,对其有害特性进行鉴别并分析其浸出规律,从而为地下水受粉煤灰排水影响后的水质预测、堆灰场选址、环境影响评价提供依据.  相似文献   

地下导线随盾构推进逐段接测中的可靠性检验     

高俊强  潘庆林 《现代测绘》2005,28(1):17-19

盾构法施工的要点是需要在井下布设高精度的控制支导线，当我们根据盾构推进进度对导线接测时，由于观测条件、观测方法、观测仪器基本相同，但观测、的成果往往会存在一定的差异，有时我们无法直接判断成果的正确与否，此时，采用测量平差中的统计检验的方法来分析这些观测数据，可以取得比较满意的结果。  相似文献   

Integer aperture bootstrapping: a new GNSS ambiguity estimator with controllable fail-rate   总被引：1，自引：0，他引：1  

P.J.G. Teunissen 《Journal of Geodesy》2005,79(6-7):389-397

In this contribution, we introduce a new bootstrap-based method for Global Navigation Satellite System (GNSS) carrier-phase ambiguity resolution. Integer bootstrapping is known to be one of the simplest methods for integer ambiguity estimation with close-to-optimal performance. Its outcome is easy to compute due to the absence of an integer search, and its performance is close to optimal if the decorrelating Z-transformation of the LAMBDA method is used. Moreover, the bootstrapped estimator is presently the only integer estimator for which an exact and easy-to-compute expression of its fail-rate can be given. A possible disadvantage is, however, that the user has only a limited control over the fail-rate. Once the underlying mathematical model is given, the user has no freedom left in changing the value of the fail-rate. Here, we present an ambiguity estimator for which the user is given additional freedom. For this purpose, use is made of the class of integer aperture estimators as introduced in Teunissen (2003). This class is larger than the class of integer estimators. Integer aperture estimators are of a hybrid nature and can have integer outcomes as well as non-integer outcomes. The new estimator is referred to as integer aperture bootstrapping. This new estimator has all the advantages known from integer bootstrapping with the additional advantage that its fail-rate can be controlled by the user. This is made possible by giving the user the freedom over the aperture of the pull-in region. We also give an exact and easy-to-compute expression for its controllable fail-rate.  相似文献