空腔结构复合填充墙-钢框架抗侧力性能试验研究   总被引：4，自引：0，他引：4  

管克俭  李捍无  彭少民 《世界地震工程》2003,19(3):73-77

通过空腔结构复合填充墙-钢框架和同尺寸纯钢框架的对比试验，分析了空腔结构复合填充墙-钢框架的抗侧力性能和滞回性能。研究结果证明空腔结构复合填充墙是一种理想的抗侧力体系，可用于多层或小高层钢结构住宅，作为结构的抗侧力构件。  相似文献   

Exploration and Study on Deep Crust Structural Characteristics in the Jiashi-Artux Seismic Region     

Zhao Jinren  Zhang Xiankang  Zhang Chengke  Ren Qingfang  Cheng Shuangxi  Zhang Jianshi  Nie Wenying  PAN Shuzhen 《中国地震研究》2003,17(2):103-112

The data from two deep seismic sounding profiles was processed and studied comprehensively. The results show that crnst-mantle structures in the investigated region obviously display layered characteristics and velocity structures and tectonic features have larger distinction in different geological structure blocks. The boundary interface C between the upper and lower crust and Moho fluctuate greatly. The shallowest depths of C (30.0km) and Moho (45.5km) under Jiashi deepen sharply from Jiashi to the western Kunlun mountain areas, where the depths of C and Moho are 44.0km and 70.0km, respectively. The higher velocity structures in the Tarim massif determine its relatively “stable“ characteristics in crust tectonics. The phenomenon in the Jiashi region, where the distribution of earthquake foci mostly range from 20kin to 40kin in depth, may infer that the local uplift of C and Moho interface, anomalonsly lower velocity bodies and deep large faults control earthquake occurrence and seismogenic processes in the Jiashi strong earthquake swarm.  相似文献   

Inelastic displacement ratios for evaluation of existing structures     

Jorge Ruiz‐García  Eduardo Miranda 《地震工程与结构动力学》2003,32(8):1237-1258

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes     

Jann N. Yang  Ying Lei  Shuwen Pan  Norden Huang 《地震工程与结构动力学》2003,32(10):1533-1554

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Detection of major geological structures in the Eastern offshore of India using Geosat altimeter data     

T. J. Majumdar  K. K. Mohanty  A. K. Srivastava 《Journal of Earth System Science》1997,106(1-2):27-32

Satellite altimetry can be used to infer subsurface geological structures analogous to gravity anomaly maps generated through ship-borne survey. The Eastern offshore was taken up for analysis using Geosat Exact Repeat Mission (ERM) altimeter data. A methodology is developed to use altimeter data as an aid to offshore hydrocarbon exploration. Processing of altimeter data involves corrections for various atmospheric and oceanographic effects, stacking and averaging of repeat passes, cross-over correction, removal of deeper earth and bathymetric effects, spectral analysis and conversion into free-air gravity anomaly. The final processed results were derived for Eastern offshore in the form of prospecting geoid and gravity anomaly maps and their spectral components. The highs and lows observed in those maps were derived in terms of a number of prominent megastructures e.g., gravity linears, 85°E and 90°E ridges, the Andaman trench complex etc. Satellite-derived gravity profiles along 12°N latitude match well with the existing structures.  相似文献   

Frequency domain modal analysis of earthquake input energy to highly damped passive control structures     

Izuru Takewaki 《地震工程与结构动力学》2004,33(5):575-590

A new complex modal analysis‐based method is developed in the frequency domain for efficient computation of the earthquake input energy to a highly damped linear elastic passive control structure. The input energy to the structure during an earthquake is an important measure of seismic demand. Because of generality and applicability to non‐linear structures, the earthquake input energy has usually been computed in the time domain. It is shown here that the formulation of the earthquake input energy in the frequency domain is essential for deriving a bound on the earthquake input energy for a class of ground motions and for understanding the robustness of passively controlled structures to disturbances with various frequency contents. From the viewpoint of computational efficiency, a modal analysis‐based method is developed. The importance of overdamped modes in the energy computation of specific non‐proportionally damped models is demonstrated by comparing the energy transfer functions and the displacement transfer functions. Through numerical examinations for four recorded ground motions, it is shown that the modal analysis‐based method in the frequency domain is very efficient in the computation of the earthquake input energy. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

新疆博格达山分段及深浅构造转换关系   总被引：15，自引：1，他引：15  

李涛  王宗秀  周高志  柳永清  李寅 《地学前缘》2004,11(3):103-114

研究表明 ,天山及邻区自中生代以来一直处于热衰减状态 ,博格达山新生代再造山具有“冷隆升”性 ,盆山边界断裂多限于上地壳内 ,而非直通中地壳低速体甚至上地幔的“深大断裂”。造山带内的韧性剪切带是在古生代形成的 ,而不是再造山期的断裂 ,它对造山带隆升及盆山耦合无贡献 ,博格达山的隆升为复式背斜构造所支持。博格达山与准东的关系为背斜北翼与盆地平缓基底构成的挠曲构造 ,而不是被深大断裂分隔的断块。博格达山具有独特鲜明的分段性 ,造山带的两个弧形构造与新生代再生前陆盆地构成独特的“斜方对称”分布样式。以板条观点为指导 ,从盆山单元的平面配置关系和深浅构造转换关系入手 ,探讨了博格达山板内造山阶段的几何学和运动学分段性的成因 ,构建了盆山耦合模式  相似文献   

Spatial and Temporal Cusp Structures Observed by Multiple Spacecraft and Ground Based Observations     

K. J. Trattner  S. A. Fuselier  T. K. Yeoman  C. Carlson  W. K. Peterson  A. Korth  H. Reme  J. A. Sauvaud  N. Dubouloz 《Surveys in Geophysics》2005,26(1-3):281-305

Downward precipitating ions in the cusp regularly exhibit sudden changes in ion energy distributions, forming distinctive structures that can be used to study the temporal/spatial nature of reconnection at the magnetopause. When observed simultaneously with the Polar, FAST, and Interball satellites, such cusp structures revealed remarkably similar features. These similar features could be observed for up to several hours during stable solar wind conditions. Their similarities led to the conclusion that large-scale cusp structures are spatial structures related to global ionospheric convection patterns created by magnetic merging and not the result of temporal variations in reconnection parameters. The launch of the Cluster fleet allows cusp structures to be studied in great detail and during changing solar wind conditions using three spacecraft with identical plasma and field instrumentation. In addition, Cluster cusp measurements are linked with ionospheric convection cells by combining the satellite observations with SuperDARN radar observations that are used to derive the convection patterns in the ionosphere. The combination of satellite observations with ground-based observations during variable solar wind conditions shows that large-scale cusp structures can be either spatial or temporal. Cusp structures can be described as spatial features observed by satellites crossing into spatially separated flux tubes. Cusp structures can also be observed as poleward-traveling (temporal) features within the same convection cell, most probably caused by variations in the reconnection rate at the magnetopause.  相似文献   

The dynamic characteristics and migration of a pyramid dune   总被引：6，自引：0，他引：6  

TAO WANG  WEIMIN ZHANG  ZHIBAO DONG  JIANJUN QU  ZHEFAN JING  WANFU WANG  JIANMIN FENG 《Sedimentology》2005,52(3):429-440

The results of wind tunnel experiments and field observations show that when the intersection angle between airflow direction and dune crest (ridge) line is > 30°, a reverse vortex is formed. Because of the convergence of sand streams from the windward and lee slopes at the crest, sand accumulates in the crestal region, causing vertical growth. Nevertheless, studies also show that the common asymmetry of the two slopes of a dune may significantly influence the evolution of arms of a pyramid dune. The migration rates of pyramid dunes are mediated by the interplay of their arms moving transversely and the vertical growth in response to the variations in wind regimes. Comparing the effects of airflow transverse to a given arm with longitudinal airflow, it is indicated that the transverse airflow is more significant in controlling the arms of pyramid dunes. The whole body of the studied pyramid dune, particularly the upper quarter section, migrated SE direction during the monitoring period. The patterns of wind erosion and deposition change alternately with seasonal variations in wind directions. The W, NE and SE sides undergo constant erosion, deposition and both erosion and deposition, respectively. The results of long-term monitoring of a pyramid dune show that southerly winds, resulting from a local circulation, markedly affect the transverse migration of the whole pyramid dune.  相似文献   

三维遥感影像在遥感地质构造解译中的应用——以福建平和植被覆盖区为例          下载免费PDF全文

史超  李书  任正情  王学平 《地质找矿论丛》2016,31(1):127-134

文章通过建立福建平和矾山三维遥感影像和线环构造解译标志,对区内芦溪—霞寨断裂、坪水断裂等典型断裂以及钟腾破火山口进行了解译。基于三维遥感影像可较好地识别构造解译标志,提高遥感构造解译的精度,降低解译的难度。  相似文献