Design of backfilled thin-seam coal pillars using earth pressure theory     

James G. Donovan  Mario G. Karfakis 《Geotechnical and Geological Engineering》2004,22(4):627-642

In underground coal mining any increase in coal recovery rate is dependent on a decrease in pillar size. Backfilling is one way of reducing the required size of pillars and hence the volume of coal left underground. Therefore any comparisons made between a self-supported mine layout and backfill supported mine layout are based directly on pillar design. The most effective way to examine the effect of backfill on pillar support, and subsequently the rate of recovery, would be to incorporate the mechanisms of backfill support directly into the current design procedure for coal pillars. This paper presents a review of the mechanics of backfill support, a method of estimating the magnitude of that support based on earth pressure theory, and an example that incorporates backfill support into current coal pillar design.  相似文献   

Fitting the Linear Model of Coregionalization by Generalized Least Squares   总被引：2，自引：0，他引：2  

Bernard Pelletier  Pierre Dutilleul  Guillaume Larocque  James W. Fyles 《Mathematical Geology》2004,36(3):323-343

In geostatistical studies, the fitting of the linear model of coregionalization (LMC) to direct and cross experimental semivariograms is usually performed with a weighted least-squares (WLS) procedure based on the number of pairs of observations at each lag. So far, no study has investigated the efficiency of other least-squares procedures, such as ordinary least squares (OLS), generalized least squares (GLS), and WLS with other weighing functions, in the context of the LMC. In this article, we compare the statistical properties of the sill estimators obtained with eight least-squares procedures for fitting the LMC: OLS, four WLS, and three GLS. The WLS procedures are based on approximations of the variance of semivariogram estimates at each distance lag. The GLS procedures use a variance–covariance matrix of semivariogram estimates that is (i) estimated using the fourth-order moments with sill estimates (GLS₁), (ii) calculated using the fourth-order moments with the theoretical sills (GLS₂), and (iii) based on an approximation using the correlation between semivariogram estimates in the case of spatial independence of the observations (GLS₃). The current algorithm for fitting the LMC by WLS while ensuring the positive semidefiniteness of sill matrix estimates is modified to include any least-squares procedure. A Monte Carlo study is performed for 16 scenarios corresponding to different combinations of the number of variables, number of spatial structures, values of ranges, and scale dependence of the correlations among variables. Simulation results show that the mean square error is accounted for mostly by the variance of the sill estimators instead of their squared bias. Overall, the estimated GLS₁ and theoretical GLS₂ are the most efficient, followed by the WLS procedure that is based on the number of pairs of observations and the average distance at each lag. On that basis, GLS₁ can be recommended for future studies using the LMC.  相似文献   

Numerical model of convection in sills     

A. Rozmarynowska  L. Czechowski 《Studia Geophysica et Geodaetica》2005,49(3):383-402

The numerical model of convection in magma sills is developed. The model is based on a full system of equations of fluid dynamics and includes heat transfer, buoyancy effects and diffusion of some minor component (marker). Solidification is treated as a phase transition. The results indicate that there are some qualitative differences between very thin sills with Rayleigh number Ra = 10⁵ and thin sills with Ra = 10⁶. For a basaltic magma the first case corresponds to the thickness of the sills of approximately 30 cm and the second case corresponds to the thickness of 60 cm. In the first case mixing is inefficient and conduction is the dominant form of heat transfer. In the second case mixing is efficient and convection is the dominant form of heat transfer. Some of the results can be scaled for the more viscous magmas in thicker sills.  相似文献   

ZDY12000LD型履带液压钻机机身立柱断裂分析          下载免费PDF全文

李骏  焉忠方  路前海 《探矿工程》2021,48(S1):339-342

钻机立柱是煤矿井下设备工作重要的承载部件,其性能直接影响整车工作的安全性和可靠性。通过建立立柱三维模型,对ZDY12000LD型定向钻机立柱的有限元分析,在最大起拔力下对立柱进行强度校核。将原立柱材料Q345钢改为Q550钢,显著提高了立柱的力学性能,立柱可承受的弯曲应力提高了43%,变形量减小4%,承载能力和安全可靠性显著提高,增强了钻机运行的稳定性、安全性和可靠性。  相似文献   

Soft rock pillars     

J. F. Abel Jr. 《Geotechnical and Geological Engineering》1988,6(3):215-248

Summary Soft rock pillars can be designed by several methods available in the mining literature. All of these methods include the effect of shape, or geometry, on the average strength of specimens and pillars. All of the pillar design methods include some measurement of the strength of specimens of the pillar rock. The most common rock specimen strength property measured is the unconfined compressive strength. However, the average strength of triaxially confined rock specimens is much greater than the unconfined specimen strength, which can be more important to pillar strength. The estimation of the strength of a pillar is complicated by the decrease in rock specimen strength with increase in specimen size.Editor's note: In common with North American engineering practise, the paper uses English units throughout, where feasible conversions are included in the text. Where not, the following factors may be used: 1 inch=25.4 mm; 1 ft=0.3048 m; 1 lbf/in.^–2=6.895 kn/m^–2; 1Tonf.=8.896 kN.  相似文献   

In situ yield behaviour of a coal pillar     

David A. Newman 《Geotechnical and Geological Engineering》1989,7(2):163-170

Summary An indication of the complete stress-strain behaviour of coal was obtained through instrumenting a headgate yield pillar and monitoring the changes in vertical and horizontal pillar stress, pillar strain, and roof-floor convergence as a function of time and distance from the moving longwall face. A semiautomated monitoring program was conducted over a 5 month period as the longwall face advanced toward and eventually passed the instrumented pillar. The development of a confined core and yield zone within the pillar was confirmed by the vertical and horizontal stress changes. Thein situ pre-failure (208 to 661 MPa) and post-failure moduli (55 to 208 MPa) of the coal were determined from the change in pillar stress versus pillar strain. Thein situ moduli are an order of magnitude lower than the 3450 MPa, commonly assumed for coal.  相似文献   

Behaviour of abandoned room and pillar mines in Illinois     

G. G. Marino  R. A. Bauer 《Geotechnical and Geological Engineering》1989,7(4):271-281

Summary Little comprehensive information has been reported on the behaviour of room-and-pillar mines. The objective of this paper is to present case data on mine failures in the Illinois basin for use in practice. Presented are results of an ongoing study and details on the site characteristics of cases where sags have developed on the surface. Site data are reported to show the geologic, mining, and sag conditions that existed. Sags mainly develop from pillar, floor, or pillar-floor failure. The character of the sags depends upon the type of mine failure as well as the overburden response.Preliminary results show that the statistical no-risk tributary pressure decreases over 300% as the mine age increases from about 2 to 100 years at a long-term value of approximately 300 psi (2070 kPa). As more information is collected and more analysis is done, the allowable tributary pressure can be determined for different site conditions.A plot is also reported that depicts the relationship of the maximum subsidence to site conditions. It was found that the modified subsidence factor was heavily dependent upon the overburden rock thickness.  相似文献   

三山岛金矿控矿断层F1的力学性质及补强措施   总被引：1，自引：0，他引：1  

郭志 《工程地质学报》1994,2(4):23-30

作者以正在开采中的三山岛金矿采场为研究对象，分析矿区开采过程中的岩体结构特征及重力方向矿柱、护顶矿柱与控矿断层F1断层泥及其上覆岩体之间的关系和力学机制。通过试验研究了断层泥的物质成分和力学性质，总结了力学特性与断层泥厚度及含水量之间的关系。在此基础上提出锚固大于中倾角的结构面，提高结构面的抗滑阻力；增加含有高、陡倾角结构面矿柱的刚度等对矿柱的补强措施。对护顶矿柱提出预先锚固；分阶段开采的补强方法。在裂隙密集带设置排水设施，改善断层泥的赋存条件，提高它的力学性能。  相似文献   

Reliability level III method in design of square pillar resting on weak floor stratum     

W. M. Pytel 《Geotechnical and Geological Engineering》1990,8(2):149-162

Summary Current methods of design of pillars resting on weak floor strata involve only a deterministic, conventional safety factor calculation, based on material parameters treated as the mean values taken from observations. In a case where high parameters variability occurs, these methods may lead to fatal design errors resulting in excessive pillar settlement and roof falls. Therefore, to include the influence of parameters quality, the new approach based on reliability level III method was developed. Consideration was given to the identification of the system parameters importance, and to density function for the safety factor treated as a random variable. Design procedure involving floor probability of failure was illustrated by numerical examples.  相似文献   

The variogram sill and the sample variance   总被引：1，自引：0，他引：1  

Randal J. Barnes 《Mathematical Geology》1991,23(4):673-678

The relationship between the sill of the variogram and the sample variance is explored. The common practice of using the sample variance as an estimate of the variogram sill is questioned, and a conceptual framework for determining the appropriateness of this heuristic is constructed.  相似文献