深水钻井中浅水流灾害问题及其地球物理识别技术   总被引：6，自引：0，他引：6  

董冬冬  赵汗青  吴时国  伍向阳 《海洋通报》2007,26(1):114-120

在深水钻井中,浅水流是一种常见的地质灾害。中国正在进行深水油气勘探,十分有必要开展这方面的地质灾害研究。介绍了浅水流的形成机制及地球物理特性。目前用于识别和预测浅水流的手段有测井和反射地震两大类方法。主要介绍了几种用于参数提取的地震反演方法,如传统Dix反演、叠后振幅反演、层析反演、叠前振幅反演等。  相似文献   

河口海岸三维水流数值模型中几种垂向坐标模式研究述评     

陶建峰  张长宽 《海洋工程》2007,25(1):133-142

回顾了近年来国内外河口、近岸海域三维斜压水流数值模式研究的进展,着重讨论了不同垂向坐标下三维水流模式的发展状况以及存在的问题。地形拟合坐标(σ坐标)模式可以很好地拟合床面地形和自由面,已在物理海洋学中被广泛使用。但在地形变化剧烈,尤其在密度层结效应明显的海域,σ坐标模式中的水平压强梯度力误差会引起伪密度流。寻求高精度的数值模式以及更加有效的拟合坐标变换将是值得努力的方向。  相似文献   

城市建设中的地震小区划与浅层地震探测     

薛荣俊  辛柏森  杨和乃 《中国海洋大学学报(自然科学版)》1993,(Z1)

简要阐述地震小区划在现代城市建设中的重要性以及在实施地震小区划的研究中浅层地震探测的重要作用及其方法原理,并给出应用浅层地震探测在城市地震小区划中的实例。  相似文献   

杆状病毒感染越冬亲虾(Penaeus chenesis)的研究——越冬亲虾感染及其垂直传播的可能性   总被引：2，自引：0，他引：2  

包振民  胡景杰  姜明  刘晓云  孔杰  石拓  徐怀恕 《中国海洋大学学报(自然科学版)》1997,(3)

在中国对虾越冬亲虾中检出杆状病毒。经对病虾鳃、前中肠、卵巢组织进行电镜观察，在这些组织中发现大量有囊膜的杆状病毒。病毒粒子大小约为３６７ｎｍ×１２８ｎｍ，核衣壳为３２４ｎｍ×９２ｎｍ。病毒在细胞内不形成包涵体，在核内或在细胞质的发生基质中装配。从病毒的形态特征、感染组织以及典型的发病症状和病理变化，初步认为亲虾感染的病毒与近年广泛报道的造成养殖对虾大规模流行病的主要原因——中国对虾杆状病毒为同一种。卵巢组织也是病毒的主要靶器官之一，亲虾卵巢组织的被感染暗示着该病毒有可能通过生殖细胞而垂直传播  相似文献   

Determining summer residence status and vertical habitat use of sailfish (Istiophorus platypterus) in the Arabian Gulf     

Hoolihan  John P.; Luo  Jiangang 《ICES Journal of Marine Science》2007,64(9):1791-1799

  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan     

Martin Gutowski  Monika Breitzke  Volkhard Spieß 《Marine Geophysical Researches》2002,23(1):57-75

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.  相似文献   

Three-dimensional numerical simulation of obfique wave action on vertical walls     

LI Benxia YU Xiping YU Yuxiu 《海洋学报(英文版)》2006,25(1):147-153

A three-dimensional numerical model based on the potential theory was developed to study the oblique wave action on vertical walls. A source term inside the domain was used to generate incident waves and outgoing waves were dissipated by sponge layers and transmitted by radiation boundaries. The finite difference method was used to solve the governing equations and boundary conditions in the regular transformed domain in σ-coordinate. Satisfactory agreements between the numerical predictions and experimental results of wave force were obtained. It is concluded that the maximum wave force acting on the vertical walls is induced by the obliquely incident waves rather than the normally incident waves.  相似文献   

地震勘探在不同地质条件下的新应用     

卢占武  张宏远 《海洋地质前沿》2005,21(4):28-32,i002

20世纪末，地震勘探技术在油气勘探、煤田勘探、工程勘探等多方面的应用都有了突飞猛进的发展。总结了近年来地震勘探在岩性、沉积相、构造体系等不同地质条件下的应用实例，用以说明地震勘探的多用性及其强大的生命力。  相似文献   

1999年以来台湾及邻近海域7.5级以上强震前的条带现象     

张年明  郑健志 《台湾海峡》2005,24(4):426-432

中国台湾地区地处欧亚板块与菲律宾海板块之间,地震活动频繁．本文报道了 我国台湾地区及其邻近海域1985～2002年间5．5级以上地震的条带内外频度比分 布,并着重研究了1999—2002年中发生的3次7．5级以上地震前的条带现象．其结 果表明:台湾地区近期发生的3次7．5级以上大地震前,5．5级以上地震呈条带分 布．这些条带符合条带内地震个数Nin≥6的条件,符合条带内、外频度比Nin／(Nin Nout)≥75％的条件,也符合条带长宽比大于5的要求,只是与板内地震条带相比,条 带的长度较短．  相似文献