Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers     

李宏男何晓宇  霍林生 《中国海洋工程》2005,19(2):185-194

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.  相似文献   

高速摄影对散体振动的研究     

王树林 《中国海洋大学学报(自然科学版)》1995,(Z1)

以现代高速摄影技术和图像分析以及数据处理方法，针对高效振动磨机中弹性散体工质（如钢棒、球体等）的振动力学进行了深入的探讨和分析，为研究散体动力学和振动超细粉碎过程中的能量分布和传递规律以及能量与物质的相互转换机理奠定了基础，也为相关学科的发展提供了一种可以借鉴的方法。  相似文献   

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints     

赵存宝张嘉钟  邢海燕黄文虎 《中国海洋工程》2007,21(1):23-38

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.  相似文献   

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers   总被引：5，自引：1，他引：5  

郭海燕  王元斌傅强 《中国海洋工程》2004,18(1):11-20

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.  相似文献   

被动震源进行地震勘探的可行性研究     

唐德林马文琪  胡宗正王艳伶 《中国煤炭地质》2008,20(2):46-48

为研究冲击钻机、打桩机、打夯机以及筑路机等设备工作时产生的震源,对开展工程地震勘探时的利用价值,在东庞矿2093工作面治水钻孔冲击钻进过程中进行了该项实验工作。试验采用WF-1006遥测数字地震仪及CGS-40型加速度检波器,接收排列之间方位角间隔20。,接收道数24道,道距5m,采样率1ms,记录长度2s。最近检波器距钻孔7m。利用SCHRAMM钻机产生的强大振动为被动震源,进行了250m、257m、183m、263m等不同钻井深度,以及与此相对应不同方位角（250°、250°、230°275°）的地震波接收试验。通过分析其地震记录,判定引发东庞矿矿井突水的陷落柱中心位于治水钻孔西南方向。该结论与三维地震勘探确定的陷落柱位置一致,可见通过选择合理的接收方式及参数,被动震源也能够用于地震勘探。  相似文献   

Aspherical correction for free vibration of elastically anisotropic solid by means of theXYZ algorithm     

Hitoshi Oda 《Pure and Applied Geophysics》1996,147(4):719-727

By applying the perturbation theory to theXYZ algorithm (a kind of variational method), the difference f in free vibration frequencies between sphere and ellipsoid was approximated as , where i and _i (i = x,y andz) (i=x, y andz) are aspherical coefficients and asphericities of the ellipsoid, respectively. We developed an analytic method to compute the aspherical coefficients719-4 by using theXYZ algorithm. A numerical example was given for an ellipsoidal olivine, and an attempt was made to estimate the asphericities of the specimen by a least-squares method, based on the relationship between frequency shift and asphericity.  相似文献   

Environmental impacts of bench blasting at Hisarcik Boron open pit mine in Turkey   总被引：2，自引：0，他引：2  

Ali Kahriman  Umit Ozer  Mehmet Aksoy  Abdulkadir Karadogan  Gungor Tuncer 《Environmental Geology》2006,50(7):1015-1023

This paper presents the results of ground vibration measurements carried out in Hisarcik Boron open pit mine located on the west side of central Anatolia near Kütahya province in Turkey. Within the scope of this study to predict peak particle velocity (PPV) level for this site, ground vibration components were measured for 304 shots during bench blasting. In blasting operations, ANFO (blasting agent), gelatin dynamite (priming), and delay electric detonators (firing) were used as explosives. Parameters of scaled distance (charge quantity per delay and the distance between the source and the station) were recorded carefully and the ground vibration components were measured for all blast events using two different types of vibration monitors (one White Mini-Seis and one Instantel Minimate Plus Model). The absolute distances between shot points and monitor stations were determined using GPS. The equation of square root scaled distance extensively used in the literature was taken into consideration for the prediction of PPV. Then, the data pairs of scaled distance and particle velocity obtained from the 565 event records were analyzed statistically. At the end of statistical evaluation of the data pairs, an empirical relation which gives 50% prediction line with a reasonable correlation coefficient was established between PPV and scaled distance.  相似文献   

超声与振荡提取沉积物中松散结合态磷的比较     

罗俊凌罗爱芹  张月琴 《岩矿测试》2005,24(3):193-196

用超声技术提取沉积物样品中松散结合态磷,并与振荡提取结果进行比较。结果表明,超声提取结果与振荡提取结果大致相当。超声提取耗时短,操作简单易行,测试结果精密度为3.8%(RSD,n=7),可以替代振荡方法提取沉积物中的松散结合态磷。  相似文献   

A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Selective controlled base isolation system with magnetorheological dampers     

Y. Ribakov  J. Gluck 《地震工程与结构动力学》2002,31(6):1301-1324

A base isolation system composed of low‐damping isolation bearings and magnetorheological (MR) fluid dampers is described. The MR fluid changes its properties under the influence of a magnetic field resulting in a damper with characteristics that may be modified in real time. This feature enables optimal control under changing excitations in a stable and cost‐effective manner. The voltage is applied according to a selective control strategy. According to the proposed approach the dampers are activated only within a given range of the base displacements. The selective control improves the efficiency of the system and significantly reduces the control forces required for an optimal structural behaviour. Models of five‐ and eight‐storey buildings are used to study the efficiency of the proposed system. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献