宽城台定点形变气压干扰小波分析及干扰排除     

王嘉琦  孙澎涛  任俊峰  袁国旭 《大地测量与地球动力学》2020,40(8):860-864

通过小波分解对宽城台定点形变仪器受气压干扰的典型事件进行分析,得出气压干扰在不同频段对不同仪器的干扰特征,并通过小波阈值去噪对各测项受气压干扰的观测数据进行干扰排除,取得较好的效果。  相似文献   

小波域尺度积在裂缝检测中的应用   总被引：4，自引：0，他引：4  

文晓涛  贺振华  黄德济 《吉林大学学报(地球科学版)》2008,38(4):703-707

常规的裂缝检测方法实际是基于道间奇异性的检测,在检测出裂缝发育带的同时也会检测出噪声.若利用大尺度的裂缝检测方法或将一些噪声压制方法与裂缝检测方法配套使用,虽可提高信噪比,但却对裂缝定位不准确.针对这种矛盾,引入小波域尺度积的裂缝检测方法,该方法将相邻尺度上的小波系数相乘,将裂缝在不同尺度间的因果关系隐含在内,在抑制噪音的同时,可有效地提高裂缝检测的精度.通过理论试算和实例应用,证明了该方法的有效性.  相似文献   

涂氏磷钙石的形成条件研究     

谢先德  陈鸣 《地球化学》2008,37(4)

用微束矿物学和激光拉曼光谱等分析测试技术,并结合人工高压实验结果,研究了我国随州陨石冲击熔脉中的白磷钙石高压相变形成涂氏磷钙石的必要条件,并对寺巷口陨石冲击熔脉中的白磷钙石虽与林伍德石、镁铁榴石和玲根石等高压矿物共生,但仅表现为结构损伤而未相变成涂氏磷钙石的原因进行了探讨.研究结果发现,随州陨石中白磷钙石或氯磷灰石的存在是涂氏磷钙石得以形成的物质前提,陨石熔脉中高达24 GPa和2000℃以上的高压高温环境是涂氏磷钙石能够形成的条件保障,而压力释放后熔脉极快的冷却速率是涂氏磷钙石得以淬火并稳定保存的关键.研究还查明,寺巷口陨石冲击熔脉比随州陨石的熔脉要宽1至2个量级,其冷却速率比随州陨石慢得多,因此,熔脉中早先形成的涂氏磷钙石,可能在脉内较高的冲击后温度影响下,慢慢退变质成白磷钙矿.  相似文献   

龙门山断裂带北段晚新近纪以来的右行走滑运动及其构造变换研究——以青川断裂为例   总被引：12，自引：1，他引：11       下载免费PDF全文

樊春  王二七  王刚  王世锋 《地质科学》2008,43(3):417-433

龙门山断裂带位于青藏高原东缘,构成了青藏高原和四川盆地的重要构造边界。近年来的研究表明:在新生代晚期,除了存在逆冲推覆之外,龙门山的中段和南段还发生了明显的右行走滑活动。对龙门山北段的青川断裂进行的系统研究发现:断裂具有明显的右行走滑特征,沿断裂发育大量不同规模的水系位错,其中嘉陵江水系位错规模最大,据此可确定青川断裂的最大位移量为17km。进一步的野外工作证实断裂的走滑位移在尾端发生构造变换,位于断裂南西端的轿子顶穹隆是叠加构造,吸收了青川断裂的部分位移量;位于断裂北东端的汉中盆地则是处于伸展应力环境下的断陷盆地,吸收了其大部分位移量。  相似文献   

Spatial operations in a GIS-based karst feature database     

Yongli Gao 《Environmental Geology》2008,54(5):1017-1027

This paper presents the spatial implementation of the karst feature database (KFD) of Minnesota in a GIS environment. ESRI’s ArcInfo and ArcView GIS packages were used to analyze and manipulate the spatial operations of the KFD of Minnesota. Spatial operations were classified into three data manipulation categories: single layer operation, multiple layer operation, and other spatial transformation in the KFD. Most of the spatial operations discussed in this paper can be conducted using ArcInfo, ArcView, and ArcGIS. A set of strategies and rules were proposed and used to build the spatial operational module in the KFD to make the spatial operations more efficient and topographically correct.  相似文献   

Stratigraphy of nutrients and metals in sediment profiles of two dimictic lakes in North-Eastern Germany     

Uwe Selig  Thomas Leipe 《Environmental Geology》2008,55(5):1099-1107

A sedimentological study of two dimitic lakes in North-Eastern Germany provided a record of anthropogenic impacts and historical changes of water quality. The upper 50 cm sediment profiles were compared for major nutrients and selected major trace elements. The sediments were dated by ²¹⁰Pb and ¹³⁷Cs measurement. The upper 50 cm sediment profiles represent approximately the last 100 years of history in both lakes. Element analyses show different characteristic stratigraphic patterns in both lakes. Based on the nutrient and metal stratification, three characteristic time periods can be documented for both lakes. In addition to agricultural use of the catchment area, atmospheric pollution greatly influenced the metal concentration in the sediment layers. Variation in the external loading and redox conditions in the hypolimnion explain the variation in the composition and accumulation of metals in the sediment stratigraphy. No increases or changes in the trophic level of either lake could be documented based on the accumulation of the nutrients C, N and P. The ratio of Fe/Mn and Fe/Ca characterized the changing redox conditions. The stratigraphy of Pb and Zn agrees with the historical variation in atmospheric pollution and confirms literature values for Central and North Europe. The drop in Pb and Zn over the last 10–15 years is a regional effect in North-Eastern Germany.  相似文献   

Deformation-induced polymorphic transformation: experimental deformation of kyanite, andalusite, and sillimanite   总被引：1，自引：0，他引：1  

Eric T. Goergen  Donna L. Whitney  Mark E. Zimmerman  Takehiko Hiraga 《Tectonophysics》2008,454(1-4):23-35

Torsion experiments were performed on the Al₂SiO₅ polymorphs in the sillimanite stability field to determine basic rheological characteristics and the effect of deformation on polymorphic transformation. The experiments resulted in extensive transformation of andalusite and kyanite to sillimanite. No transformation occurred during the hot-press (no deformation) stage of sample preparation, which was carried out at similar P–T conditions and duration as the torsion experiments. Experiments were conducted on fine-grained (< 15 µm) aggregates of natural andalusite, kyanite and sillimanite at 1250 °C, 300 MPa, and a constant shear strain rate of 2 × 10^− 4/s to a maximum shear strain of 400%. Electron back-scattered diffraction (EBSD) analysis of the experiments revealed development of lattice-preferred orientations, with alignment of sillimanite and andalusite [001] slightly oblique to the shear plane. The kyanite experiment could not be analyzed using EBSD because of near complete transformation to sillimanite. Very little strain ( 30%) is required to produce widespread transformation in kyanite and andalusite. Polymorphic transformation in andalusite and kyanite experiments occurred primarily along 500 µm wide shear bands oriented slightly oblique and antithetic to the shear plane and dominated by sub-µm (100–150 nm) fibrolitic sillimanite. Shear bands are observed across the entire strain field preserved in the torsion samples. Scanning transmission electron microscope imaging shows evidence for transformation away from shear bands; e.g. fibrolitic rims on relict andalusite or kyanite. Relict grains typically have an asymmetry that is consistent with shear direction. These experimental results show that sillimanite is by far the weakest of the polymorphs, but no distinction can yet be made on the relative strengths of kyanite and andalusite. These observations also suggest that attaining high bulk strain energy in strong materials such as the Al₂SiO₅ polymorphs is not necessary for triggering transformation. Strain energy is concentrated along grain boundaries, and transformation occurs by a dynamic recrystallization type process. These experiments also illustrate the importance of grain-size sensitive creep at high strains in a system with simultaneous reaction and deformation.  相似文献   

基于小波变换的阈值降噪方法在地震资料处理中的应用   总被引：2，自引：0，他引：2  

徐玉玲  贺振华  黄德济 《物探化探计算技术》2008,30(6)

这里主要讨论了小波变换阈值降噪方法的基本原理,并且将广泛使用的通用阈值方法与Birge-Massart阈值方法进行了比较,展现了Birge-Massart阈值选取方法的优越性。通过对模拟数据和实际地震资料的处理结果表明,基于小波变换的Birge-Massart阈值降噪方法对地震信号降噪具有很好的效果。  相似文献   

小波分析在垂向海潮特征信息去噪研究     

陈运  吴志露  何丽娜 《测绘工程》2017,26(3)

目前国内外许多学者利用沿海GPS站点的高精度坐标时间序列进行海潮特征信息的提取研究,已取得一定成果,但高精度坐标时间序列中不可避免地存在许多噪声,极大影响海潮特征信息的提取。基于日本GMSD站的67d的高精度PPP坐标时间序列,利用小波分析进行去噪实验,经FFT变换后,将提取的结果与FES2004海潮模型的特征值比较。实验结果表明:经小波分析后,GPS站点的时间序列精度得到提高;经小波去噪后的反演精度均有不同程度的提高,最多达到0.14mm,而海潮特征值的量级为厘米级或者亚厘米级,说明小波分析对海潮特征值的提取精度有明显提高。  相似文献   

动态位姿激光跟踪测量定向解算精度分析     

王欣宇  范百兴  王同合  杨占立  张国龙 《测绘工程》2017,26(3)

激光跟踪仪采用激光干涉测量技术,可对空间运动目标进行跟踪并实时测量其空间三维坐标,具有采样频率高、测量精度高、测量范围大等特点。根据测量对象动态性的特点,对动态位姿测量的需求更加迫切,由多台激光跟踪仪组成的测量系统对目标进行实时动态位姿测量引起人们的关注。文中由3台激光跟踪仪组成动态测量系统,建立测站坐标系,根据空间直角坐标系转换模型统一测量坐标系,提出两种转换参数的计算方法,并通过实验验证两种方法的可行性和精度。  相似文献