Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

RECENT TECTONIC DEFORMATION ANOMALY AND EARTHQUAKES IN GANSU-NINGXIA-QINGHAI AREA     

Wang Shuangxu  Zhang Xi  Zhang Sixin  Xue Fuping 《大地测量与地球动力学》2003,23(Z1)

1　IntroductionAccordingtogeologicalstructure ,theGansu Ningxia Qinghaiareabelongstothenortheastmar ginofQinghai Tibetblock .Thisareahasbeenpaidmuchattentionby geo specialistsinChinaandabroadbecauseofitssignificanttectonicmovement,itsintensiveseismicity ,anditsimportanceinearth quakehazardmitigation .IntheDevelopmentPro gramonNationalKeyBasicResearchesundertheProject“MechanismandPredictionofContinentalStrongEarthquakes”,themechanismsofcontinen talstrongearthquakesarestudied ,usinghypo…  相似文献   

对青藏东北缘现今块体划分、运动及变形的初步研究   总被引：19，自引：9，他引：10  

张晓亮  江在森  陈兵  李辉 《大地测量与地球动力学》2002,22(1):63-67

利用2维非连续变形分析方法（DDA），以位移代替围压作为边界约束力，研究青藏东北缘现今块体划分及其运动变形。根据该地区地质构造及地震活动，以GPS点测量位移作为模拟结果约束点，得出了较合理的块体划分模型和随时间演化的主应变分布图，并把应变高值区与近几年来发生的5级以上地震作对比，得出了研究区内地震危险性可能较大的区域。另外，对模拟的甘青块体与阿拉善块体的边缘带断裂左旋运动做了大概计算。  相似文献   

用双三次样条函数和GPS资料反演现今中国大陆构造形变场   总被引：38，自引：20，他引：18  

杨少敏  游新兆  杜瑞林  乔学军  王琪 《大地测量与地球动力学》2002,22(1):68-75

将中国大陆现今构造变动视为一种连续的地壳变形,利用双三次样条函数模拟了近期GPS测定的大陆内部及周边地区412个测站速率,反演大陆地区自洽的构造变动速度场和应变率场.模拟结果显示:印度板块与欧亚板块的碰撞、挤压是构成中国大陆内部岩石层水平形变的主要驱动力.印度板块在东喜马拉雅构造结深深插入青藏高原,造成地壳大规模的缩短和抬升.青藏高原东南部的喜马拉雅带、拉萨和羌塘地块以及青藏高原东南边的川滇地区,内部构造活动强烈,其内部的构造变形包含地壳碎片的冲断、褶皱和侧向逃逸.大陆地壳(或岩石圈)的增厚,尤其是喜马拉雅山脉南北向的快速缩短和青藏高原东西向的缓慢拉张,大约吸收了印欧板块会聚量的85%,西藏中东地区东西向的拉张速率达到了(16±2.0)mm/a,且顺时针方向扭转明显.印度板块相对欧亚板块运动的欧拉极为(29.7°N, 19.3°E, 0.392°/Ma);华南地块相对于欧亚大陆向东(102°±7.4°)南的运动速率是(11±1.54)mm/a,华南块体相对欧亚板块运动的欧拉极为(62.25°N, 126.56°E, 0.141°/Ma);塔里木地块相对较稳定,其西部运动速度高于东部运动速度,作顺时针方向旋转.总体上讲,中国大陆运动方向为北偏东呈辐射状,从西部近南北方向的运动转向东部地区东南方向的运动,绕东喜马拉雅构造结有一顺时针方向的旋转.横穿喜马拉雅构造带及青藏内部的南北向压缩速率为(19±2.0)mm/a,横穿西天山构造带的南北向压缩平均速率为(13±1.5)mm/a,横穿东天山构造带的南北向压缩平均速率为(6.0±1.4)mm/a.阿尔金断裂带的左旋走滑速率为(6±1.2)mm/a.  相似文献   

青藏块体东北缘断层形变与中强地震   总被引：7，自引：4，他引：3  

陈兵  江在森  马文静  黎凯武  薛富平 《大地测量与地球动力学》2002,22(4):49-55

对祁连山－海原断裂带近期断层形变特征进行了初步研究，发现多场地，大范围的断层活动异常是中等强度地震发生的显著背景，并且往往与大陆地震活动的阶段性总体状况相呼应；区域形变存在明显的特征量，包括特征形态和特征时间，同一场地在不同地震前的异常特征具有重复性，但会受到背景差异显著的不同地震的影响，目前形变状况表明研究区仍具有发生中强地震的地壳运动背景。  相似文献   

昆仑山8.1级地震前中国大陆的构造应变背景   总被引：10，自引：4，他引：6  

杨少敏  王琪 《大地测量与地球动力学》2003,23(3):61-65

利用“网络工程”1998～2001年累积的1181个测站的GPS重复观测资料，采用双三次样条函数模型建立中国大陆水平运动模型速度场，用大地坐标在椭球面上计算各类应变场，详细分析了2001年昆仑山8．1级地震前中国大陆水平构造应变场空间分布特征。各类构造应变场的最高值都出现在喜马拉雅构造带与昆仑山地块内(地震断裂带南侧)，鲜水河—安宁河断裂带次之。分析表明，昆仑山8．1级地震正好发生在张性面膨胀应变率的高值区，第一、第二和最大剪应变率高值区边缘的突变区和最大、最小主应变率的高值区。  相似文献   

地震前后垂直形变场动态演化的量化指标   总被引：3，自引：2，他引：1  

张四新  王双绪  陈兵  李风琴 《大地测量与地球动力学》2004,24(3):35-40

提出一种表达垂直形变场动态演化过程的量化指标——区域应变率、应变集中度。在此基础上，对南北地震带各水准监测区近30年的垂直形变资料进行了实际计算．并结合具体震例进行了对比研究。结果表明：量化指标在一定程度上能够反映地震前后形变场的动态演化过程和地壳运动状态，对地震的中长期预报有一定的积极意义。  相似文献