200～300N高强度合成金刚石及其在钻探中的应用          下载免费PDF全文

方啸虎  张龙 《探矿工程》1996,(4):38-40

对会“打滑”地层,国内外均为难题,新研究的技术是：（１）用特殊的新构思,运用内设备,压制出可批量２供应的高强度金刚石,这种高强度金刚石可承受比目前高得多的钻压;（２）运用强力钻进的配套技术,用上述高强度金刚石制作头。  相似文献   

南海海盆区莫霍面分布规律及其对深部钻探的意义     

秦绪文  张宝金  赵斌  路允乾  陈玺  王利杰  许振强  张如伟  耿明会  杨振  李建平  吕文超  尉建功 《地质学报》2022,96(8):2635-2646

钻遇莫霍面是人类一直以来的梦想。深海海底是地球上离莫霍面最近的地方，目前有研究推测南海是世界上莫霍面深度最浅的海域之一，但缺乏足够的直接证据。深反射地震探测可以直接揭示岩石圈的构造形态，是莫霍面探测的重要手段。本文基于长达15000 km的深反射多道地震剖面的解释、处理、制图和分析，结合前人的研究，形成了南海海盆区莫霍面反射特征和空间分布的初步认识。① 南海东部次海盆南部早期经历了较快速扩张，岩浆供应充足，受扩张停止后岩浆活动影响较小，基底平坦，地质构造相对简单，同时洋壳地震速度结构不存在异常，且有较强的广角莫霍面反射波和可识别的地幔顶部折射波，具备莫霍面钻探的基本条件。② 南海海盆不同区域的莫霍面反射强度存在较大差异。其中东部次海盆莫霍面反射最为强烈且清晰，西北次海盆次之，西南次海盆仅有零星出现的清晰莫霍面反射且可信度不高。③ 识别南海海盆区莫霍面地震反射长度超过3500 km，首次形成了海盆区深度域莫霍面地震反射空间分布图。与重力反演的莫霍面深度相比，利用深反射多道地震计算的莫霍面深度细节更为丰富，并且可以在垂向上清晰刻画莫霍面的结构。整体上，南海海盆区莫霍面地震反射强烈和可信度高的区域中，深度较浅的区域之一是东部次海盆南部，最浅处仅约9. 5 km，其中水深4. 01 km，洋壳厚度仅5. 54 km。综合判断，东部次海盆南部是南海重要的莫霍面钻探备选区，这对南海莫霍面钻探选址具有重要意义。  相似文献   

硫铅酸盐“S”型瞬凝水泥干法护壁堵漏技术研究          下载免费PDF全文

彭振斌 《探矿工程》1995,(2):41-42,60

介绍了硫铝酸盐“Ｓ”型瞬凝水泥干法者漏时使用的配方,阐述了输送工具和扫孔钻具的设计以及灌注工艺技术。  相似文献   

Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site     

Taoze LIU Yuangen YANG Bangyu LIU Xiangyang BI Feili LI 《中国地球化学学报》2006,25(B08):41-42

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.  相似文献   

Increasing of efficiency of desulphurisation processes of coals during thermal destruction     

Turchanina Oksana Satin Vladimir Derevyanko Aleksey 《中国地球化学学报》2006,25(B08):51-52

As is well known, a high content of sulphur in coals is an effect of the post-depositional history of coal seams and one of the most important criteria of its use as a fuel. Sulphur in coals can cause a serious environmental and technological problem during their utilization. This problem is very actual for the Donetsk Basin because 734 mined seams out of the total of 1009 （73%） are comprised of coals with sulphur content -2%. The chemical pre-treatment as a first stage in their processing is widely used in order to effectively obtain the thermal destruction products of coals （such as semi-coke, coke, adsorbents, etc.） and to simultaneously utilize coal wastes. Development in pre-treatment methods for high-sulphur, low-rank coals is especially desirable for reducing the sulphur contents of the solid products. The aim of the present work is to investigate the influence of coal pre-treatment on the yield and composition of thermal destruction products, and the sulphur distribution among different components of the coals of different genetic types by reductivity （low-reduced LRC and reduced RC coals）. The thermal behavior of the coals was studied by means of the Fisher method （heated to 520℃, at a rate of 7℃/min）. The composition of the semi-coking gas was investigated by means of a VTI gas analyzer. The coal samples were chemically treated directly before thermal destruction by the introduction of 1-% solutions of radical polymerization initiator AAD （acrylic acid dinitrile C8H12N4） and products of coal-tar distillation （absorber oil）. Coal pre-treatment increases the semi-coke yield and its coking ability, and changes the liquid/gaseous product ratio.  相似文献   

我国地质找矿取心（样）钻探设备现状及提高效能的分析研究          下载免费PDF全文

张永勤 《探矿工程》2006,33(8):45-50

概述了我国地质找矿钻探市场现状及前景，分析研究了地质取样钻探传统的立轴钻机及全液压动力头钻机的优缺点及综合效能，针对国家提出加强地质工作的形势及中国的实际状况，提出了完善和改进我国现有钻探设备、提高我国地质找矿取样钻探效率、降低能耗及成本的观点及建议。  相似文献   

压力注浆在贵州岩溶裂隙钻探施工中的应用          下载免费PDF全文

颜丙宏夏宗清  赵善友 《探矿工程》2006,33(12):48-49

结合在贵州岩溶地区钻探施工实践，介绍了采用压力注浆方法在岩溶裂隙地层煤田钻探堵漏中的应用效果。  相似文献   

空气潜孔锤与气举反循环钻进组合工艺在水文水井钻探中的应用          下载免费PDF全文

赵鸿杰  孙智杰 《探矿工程》2006,33(11):52-53

阐述了空气潜孔锤与气举反循环钻进组合工艺的技术特点和施工特点，通过两口水井施工实例充分展现了其在施工效率、成井质量、洗井效果、市场竞争等方面的优越性。  相似文献   

山东淄博煤矿大口径超深基岩排水孔钻井技术          下载免费PDF全文

赵光贞  刘玉仙  李海波 《探矿工程》2006,33(8):53-54

由于第四系、二叠系、石炭系岩性复杂及缩径、坍塌、漏失等情况，山东淄博煤矿大口径超深定向排水孔成井难度大。该井采用了水泥注浆堵漏和水泥造壁稳定孔壁，应用“气举反循环＋垂钻”钻进工艺方法控制钻孔顶角，应用阶梯式组合牙轮钻头、水泥固井止水等技术方法，达到了设计要求。  相似文献   

励精图治,凝聚先辈心智；继往开来,展现探矿风采     

蒋国盛 《探矿工程》2006,33(3):1-1

中国地质大学（武汉）探矿工程科学在老一辈探矿科学家和全国同仁的大力支持下，经过50多年努力和发展，已成为我国探矿工程人才培养的重要阵地和科学研究的生力军。我校现从事探矿工程科学研究与人才培养教职工人数近百人，其中，俄罗斯外籍院士2名，教授20名，博士生导师10名。并聘请了刘广志院士、苏义脑院士、王达、耿瑞伦、高德利、孙清德、杨建林等为兼职教授。设5个本科专业：勘查技术与工程（原钻探工程）、  相似文献