Stability and accuracy analysis of the central difference method for real‐time substructure testing     

B. Wu  H. Bao  J. Ou  S. Tian 《地震工程与结构动力学》2005,34(7):705-718

The central difference method (CDM) that is explicit for pseudo‐dynamic testing is also believed to be explicit for real‐time substructure testing (RST). However, to obtain the correct velocity dependent restoring force of the physical substructure being tested, the target velocity is required to be calculated as well as the displacement. The standard CDM provides only explicit target displacement but not explicit target velocity. This paper investigates the required modification of the standard central difference method when applied to RST and analyzes the stability and accuracy of the modified CDM for RST. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Electromagnetic Radiation from Rock During Uniaxial Compression Testing: The Effects of Rock Characteristics and Test Conditions   总被引：3，自引：0，他引：3  

K. Fukui  S. Okubo  T. Terashima 《Rock Mechanics and Rock Engineering》2005,38(5):411-423

  相似文献   

Mechanism of loading on plates due to explosive detonation     

W. L. Fourney  U. Leiste  R. Bonenberger  D. J. Goodings 《Fragblast: International Journal for Blasting and Fragmentation》2005,9(4):205-217

This paper investigates the various mechanisms and parameters that are responsible for delivering impulse to a vehicle that is unfortunate enough to detonate a buried mine. Small scale tests are used to examine the effects of air blast or ejected sand in imparting impulse to a plate that is located above the surface of the saturated soil that contains the explosive. Parameters such as confinement, stand off distance, depth of burial of the explosive, density of the soil, and saturation level of the soil are also examined.  相似文献   

月动力延伸预报500hPa高度场检验及其在重庆月气候预测中降尺度应用   总被引：1，自引：0，他引：1  

唐红玉  董新宁  周秀华  覃志年 《沙漠与绿洲气象(新疆气象)》2016,10(3):1-8

根据2015年国家气候中心实时下发的第二代月动力延伸模式(DERF2.0)逐日资料和历史回算资料,统计构建不同时间起报的月500hPa高度场格点数据序列,针对重庆2月气温和8月降水量方差和预测难度较大的事实,分别分析2010-2014年逐年1月和7月16日、21日、26日、31日起报的2月和8月500hPa高度场预报场与同期NCEP资料实况场的分布型,结果表明：预测效果低纬好于中高纬,8月总体好于2月;基于上述滚动的500hPa预报场,试验了4个关键区和5种统计降尺度方法,对重庆2010-2015年2月气温和2010-2014年8月降水量进行回报预测和检验结果表明,16日起报的模式场对2月气温有较好的参考价值,配合最好的关键区为本区上空,而降尺度方案中Lamb方法效果最佳,二者结合的预测效果最好;8月降水回报检验表明,虽然8月降水预测效果不如2月气温,但在预测关键区取自定义关键区时,车氏方法的降尺度方案预测效果相对较好。  相似文献   

COPEX和HM2000与APEX型剖面浮标比测试验及资料质量评价     

卢少磊  孙朝辉  刘增宏  许建平 《海洋技术学报》2016,(1):84-92

利用船载CTD仪、国外剖面浮标(APEX)和实验室盐度计等标准仪器设备,在西北太平洋海域对2种型号国产剖面浮标(COPEX和HM2000)进行了现场比测试验,并对观测资料质量进行了定性和定量分析与评价.结果表明:(1) COPEX和HM2000型剖面浮标观测的盐度资料均能达到国际Argo计划提出的±0.01的精度要求;(2)HM2000的最小观测深度离海面1 m以内,最大观测深度基本稳定在2 000 m左右,并能保持在1000 m深度附近漂移,而COPEX的最小观测深度在8～9 m之间,最大观测深度则在1 800～1 900 m之间波动,且漂移深度都在600～800 m之间;(3)COPEX和HM2000都获得了70条以上有效观测剖面.总体而言,两种国产剖面浮标观测的温、盐度资料都是可信、可靠的.但试验中暴露的一些问题和不足仍有待不断改进和完善.  相似文献   

Helical probe tests in residual soils of the Appalachian Piedmont     

Shehab S. Agaiby  Zhongkun Ouyang  Paul W. Mayne 《Geomechanics and Geoengineering》2018,13(3):217-225

Helical probe tests (HPT) are a quick and economical means for manual field testing of soils to depths of 1.5 m with readings taken at 0.15-m intervals in only 10 min. The equipment is lightweight (only 2 kg) and thus amenable to deploy on initial site reconnaissance explorations, shallow pavement projects, earth retention walls, and/or compaction of fills. Although suitable for use in a variety of geomaterials: sands, silts, clays, and mixed soils, the specific application to residual fine sandy silts and silty fine sands of the Appalachian Piedmont and Blue Ridge geologic provinces is shown here. Existing relationships for converting the measured HPT torque reading to equivalent cone penetration testing (CPT) tip resistances are reviewed, as well as other trends.  相似文献   

Landfill site selection based on reliability concepts using the DRASTIC method and AHP integrated with GIS – a case study of Bengaluru city,India     

L. G. Santhosh  G. L. Sivakumar Babu 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2018,12(3):234-252

The selection of landfill sites for municipal solid waste (MSW) disposal involves consideration of geological, hydrological and environmental parameters which exhibit large spatial variability. Therefore, it is necessary to define, to what extent the chosen sites are reliable such that the probability of environmental pollution and health risks to population is minimal. In the present study, groundwater vulnerability to contamination has been assessed using the standard DRASTIC method. The results showed that the study region has 9.45% of very less, 32.94% of less, 25.47% of moderate, 22.79% of high and 9.35% of very high vulnerable zones. The study also revealed that none of the landfills are located in safe zones. This suggests that it requires proper remedial measures to avoid environmental pollution. A landfill site selection process has been carried out using the Analytical Hierarchy Process integrated with Geographical Information System tools. The obtained results showed that only 3.59?km² (0.08%) of the total area is suitable for landfills. The reliability analysis of the site suitability revealed that landfills are located at unreliable locations where the probability of risk to environmental pollution is high. The presented approach assists decision-makers in selecting reliable locations for the safe disposal of MSW.  相似文献   

海上高产高含蜡井测试工艺优化研究和应用          下载免费PDF全文

冯大龙  黄伟  谭振兴  袁则名 《探矿工程》2021,48(6):39-43

为研究海上高产高含蜡油气井测试工艺优化方案,以东海西湖凹陷某井测试作业中所暴露出的问题为导向,开展西湖高产高含蜡储集层测试问题原因分析和国内外技术调研,同时进行了测试管柱和地面测试流程的流动性保障技术研究及原油燃烧保障技术研究。研究表明地面流程结蜡、大油嘴放喷返排出大颗粒碎屑及大产量原油燃烧导致燃烧头损坏是影响测试的主要原因,因此对测试管柱、地面测试流程及燃烧保障等进行工艺优化,以解决高产高含蜡油气井测试相关问题。  相似文献   

SMA复合摩擦阻尼器性能的试验研究   总被引：3，自引：0，他引：3  

薛素铎  石光磊  庄鹏 《地震工程与工程振动》2007,27(2):145-151

利用形状记忆合金(SMA)的超弹性效应及高阻尼性能,结合传统Pall摩擦型阻尼器的特点,提出了一种SMA复合摩擦阻尼器。在建立阻尼器力学分析模型的基础上,对SMA复合摩擦阻尼器的性能进行了试验研究,分析了位移幅值、加载频率等对阻尼器的等效刚度、单位循环耗能和等效阻尼比的影响,并与理论分析结果进行了对比。研究表明,SMA复合摩擦阻尼器在加卸载循环下会形成比较稳定的滞回曲线,表明这种阻尼器具有良好的耗能能力。  相似文献   

老黏土地基承载力的确定   总被引：1，自引：0，他引：1  

谭松林  王江 《地质科技情报》2007,26(4):76-78

对比分析了各种确定地基承载力的方法,阐述了理论公式计算确定老黏土地基承载力的重要性.结合武昌地区的工程实例,用各种方法计算确定了老黏土的地基承载力值.研究表明,原位测试方法得到的承载力值偏低,而理论公式计算较合理.为了提高老黏土地基承载力的可信度和精度,在岩土工程勘察中除采用原位测试方法外,有必要结合理论公式计算来获取老黏土地基承载力值.  相似文献