Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)     

MARC J.P. GOUW 《Sedimentology》2008,55(5):1487-1516

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.  相似文献   

Deciphering polymetamorphic episodes in high-grade metamorphic orogens: Constraints from PbSL, Sm/Nd and Lu/Hf garnet dating of low- to high-grade metasedimentary rocks from the Kaoko belt (Namibia)     

B. Seth  S. Jung  B. Gruner   《Lithos》2008,104(1-4):131-146

Three dating techniques for metamorphic minerals using the Sm–Nd, Lu–Hf and Pb isotope systems are combined and interpreted in context with detailed petrologic data from crustal segments in NW Namibia. The combination of isochron ages using these different approaches is a valuable tool to testify for the validity of metamorphic mineral dating. Here, PbSL, Lu–Hf and Sm–Nd garnet ages obtained on low- to medium-grade metasedimentary rocks from the Central Kaoko Zone of the Neoproterozoic Kaoko belt (NW Namibia) indicate that these samples were metamorphosed at around 550–560 Ma. On the other hand, granulite facies metasedimentary rocks from the Western Kaoko Zone underwent two phases of high-grade metamorphism, one at ca. 660–625 Ma and another at ca. 550 Ma providing substantial evidence that the 660–625 Ma-event was indeed a major tectonothermal episode in the Kaoko belt. Our age data suggest that interpreting metamorphic ages by applying a single dating method only is not reliable enough when studying complex metamorphic systems. However, a combination of all three dating techniques used here provides a reliable basis for geochronological age interpretation.  相似文献   

Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros     

Mohammad D. Fakhari  Gary J. Axen  Brian K. Horton  Jamshid Hassanzadeh  Abdolhossein Amini 《Tectonophysics》2008,451(1-4):170-185

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.  相似文献   

能量色散X射线荧光光谱法测定钼矿石中钼铅铁铜   总被引：1，自引：1，他引：0  

田文辉  王中岐  张敏 《岩矿测试》2008,27(3):235-236

建立了能量色散X射线荧光光谱法测定钼矿石中钼、铅、铁、铜的方法,讨论了粒度效应、矿物效应的影响因素,确定了采取粉末样品,用系列标准样品建立工作曲线,通过元素间相互校正消除基体效应,用内控标准样品考察了方法的精密度(RSD,n=11)为0.44%～15.4%。实际样品的测定结果和化学法相符,可满足日常分析工作需要。  相似文献   

火试金法测定铜精矿中金含量结果的不确定度评定   总被引：2，自引：0，他引：2  

江水英  肖化云  吴声东  吴波  秦云和 《岩矿测试》2008,27(4):299-301

对火试金法测定铜精矿中金含量的结果进行不确定度评定。分析了铜精矿样品称量、铜精矿样品的不均匀性和配料处理,以及金粒称量等因素对金含量测量结果不确定度的影响,并得出火试金法测量铜精矿中金含量的扩展不确定度。  相似文献   

西藏驱龙超大型斑岩铜矿床:地质、蚀变与成矿   总被引：54，自引：17，他引：37  

杨志明  侯增谦  宋玉财  李振清  夏代详  潘凤雏 《矿床地质》2008,27(3):279-318

驱龙超大型矿床是一个产于后碰撞伸展环境下、与大洋俯冲无关的新型斑岩铜矿。文章通过对驱龙铜矿床地质、蚀变与矿化的详细研究,建立了驱龙中新世岩浆演化序列,初步查明了岩浆浅成侵位的构造控制要素,厘定了主要的围岩蚀变类型及空间展布规律,查明了引起各期蚀变事件的地质记录及矿化的空间分布规律,并探讨了成矿物质沉淀的机制,初步建立了该矿床的成矿模型。研究表明,驱龙铜矿中新世斑岩是闪长质深部岩浆房不断演化的产物,花岗闪长岩中新发现的、结晶时间为22.2Ma左右的闪长质包体可近似代表深部岩浆房组分,依次产出的花岗闪长岩、呈岩株或岩枝产出的P斑岩、X斑岩及最晚期的闪长玢岩(15.7±0.2)Ma,均为深部岩浆房连续演化的产物,岩浆持续6Ma左右。岩浆演化过程中角闪石、斜长石不断的结晶分异,导致了岩石常量元素、稀土元素及微量元素组成的规律性变化,斑岩埃达克质的特征也因岩浆演化过程中角闪石等矿物的不断结晶分异而引起。X斑岩中锆石的Hf同位素特征表明,岩石可能形成于新生下地壳的部分熔融。大面积产出的花岗闪长岩为驱龙铜矿最主要的含矿围岩,容纳了驱龙矿床70%以上的矿体,主要由斜长石、钾长石和石英组成,具花岗结构-似斑状结构,近EW向产出,其浅成就位可能受背斜控制,其后的各期斑岩均沿该侵位中心上侵,而冈底斯地壳中新世的快速抬升与剥蚀是导致含矿斑岩浅成侵位的根本原因;矿区内的SN向裂隙带既不控岩,也不控矿。浅成侵位的斑岩及深部岩浆房均发生了流体出溶。发生了大量流体出溶的深部岩浆房,是矿区早期蚀变流体的主要来源,显微晶洞构造及单向固结结构(UST)是流体出溶的地质记录。蚀变主要有3种类型,分别为早期的钾硅酸盐化、青磐岩化以及晚期的长石分解。钾硅酸盐化可分为2个阶段,即蚀变矿物以次生钾长石为主的早期钾硅酸盐化和以次生黑云母为主的晚期钾硅酸盐化。青磐岩化因产出的岩石类型不同,蚀变矿物组合具有明显差异性:产于叶巴组地层中的青磐岩化相对较强,蚀变矿物以绿帘石为主;产于花岗闪长岩中的青磐岩化相对较弱,蚀变矿物以绿泥石为主。晚期长石分解蚀变以破坏长石类矿物为特征,蚀变矿物主要为绢云母-绿泥石-粘土等。石英和硬石膏贯穿于上述各种蚀变中。空间上,钾硅酸盐化位于斑岩体及其周围地区,青磐岩化位于钾硅酸岩化外侧。后期形成的长石分解蚀变强烈叠加了早期钾硅酸盐化,介于钾硅酸盐化带与青磐岩化带之间。与早期钾长石化有关的脉体主要为不规则石英-钾长石脉,与晚期黑云母化有关的脉体主要为不规则至板状的石英-硬石膏脉、黑云母脉,与青磐岩化有关的脉体主要为板状的绿帘石-石英脉,与晚期长石分解蚀变有关的脉体主要为板状黄铜矿-黄铁矿脉及黄铁矿脉;在早期钾硅酸盐蚀变与晚期长石分解蚀变转换阶段,发育一组板状的石英-硫化物脉。早期不规则的脉体形成于斑岩结晶早期、矿区裂隙小规模发育阶段;晚期的板状脉体形成于斑岩弱固结或固结之后、矿区大规模连通裂隙发育阶段。驱龙矿区的铜矿化分布较为均一,主体产于花岗闪长岩中,其中,铜矿化主体形成于黑云母化蚀变阶段,转变阶段及长石分解阶段也有大量铜的形成;钼主要形成于转换阶段,长石分解蚀变阶段也有产出。黑云母化阶段,铜的沉淀与角闪石黑云母化、斜长石钾长石化过程中Ca2 的大量释放有关;转换阶段,铜钼矿化可能与压力和(或)温度骤降有关;晚期铜矿化与长石矿化蚀变阶段,斜长石绿泥石化、黑云母绿帘石化过程中Ca2 及Fe2 的释放有关。  相似文献   

湘中奥陶纪锰矿带成矿特征及资源前景     

彭三国  付群和  张殿春 《矿床地质》2008,27(5):622-630

湘中奥陶纪沉积锰矿带位于湖南省安化县、桃江县、宁乡县境内,呈近EW向展布,矿带内锰矿以质量好而著称。该成矿带的成锰沉积盆地受控于加里东期张性断裂系统,为一断陷盆地。盆地内发育一组NW向同沉积断裂,形成了一系列断陷槽,控制了沉积岩相的分布。锰矿主要产于盆地中心亚相的黑色页岩夹碳酸锰矿微相内。据矿带中锰矿的地质和地球化学特征以及微量元素和碳、氧、锶同位素组成,笔者认为,该锰矿属于热水沉积成因。综合对比表明,该成矿带具有良好的成矿条件和值得注意的资源潜力,有可能发展为大型锰成矿带。  相似文献   

云南官房铜矿床矿石矿物特征及银的赋存状态   总被引：1，自引：0，他引：1  

刘德利  刘继顺  张彩华  韩海涛  周余国 《矿床地质》2008,27(6):695-704

通过显微镜鉴定、电子探针(EPMA)及扫描电镜能谱分析(SEM/EDS)等方法,首次对官房铜矿的矿物组合和银的赋存状态进行了研究。初步查明,矿石矿物为中-低温热液成因,并受火山机构及断裂构造的控制;银矿物主要为碲银矿和辉银矿。矿石中银与铜呈明显正相关关系,而方铅矿中不含银。银主要以类质同象的形式赋存于含铜矿物或黄铁矿中;银的独立矿物含量低,且多呈包裹体的形式存在于黄铜矿、斑铜矿及黄铁矿中,或以微细粒状赋存于矿物颗粒间和斑铜矿的表面。  相似文献   

江西省德兴铜矿矿区重金属元素的环境效应   总被引：6，自引：0，他引：6  

初娜  赵元艺  张光弟  杨慧 《地质学报》2008,82(4):562-576

本文系统研究了德兴铜矿排石场和尾砂库的环境问题,以环境介质（水土植物）中重金属元素含量为研究对象,论述矿区重金属的环境效应。研究结果表明祝家村低品位矿石堆浸场淋滤产生的酸性废水是造成大坞河流域重金属污染的主要来源。大坞河上游水体中Cu元素含量高达14506μg/L,是国家Ⅲ级水标准的14倍之多,Zn元素含量高达2938μg/L,是国家Ⅲ级水标准的2.9倍,同时pH值在3~4范围内;到中下游水体中Cu元素含量减小到几千到几百μg/L,水质有所改善。大坞河沿岸上游和中游土壤重金属含量受河水影响,随着与河岸距离的增加而减小。同时水稻中Pb元素含量是国家粮食标准的2倍。推测4#尾砂库尾砂表层氧化带深度大于80cm;而1#尾砂库库内尾砂中氧化带估计在0~25cm处。推测两个尾砂库产酸能力小于酸中和能力,故坝底水中pH值在7左右,对周围水体影响较小。与4#尾砂库距离近的石墩头村稻田表层土壤中Cu、Mo元素含量较高,远离尾砂库土壤中重金属含量降低。同时4#尾砂库周围土壤中Cd、Pb、Cu元素的吸附态、碳酸盐态比例在20%左右,因而在酸性环境下较容易被植物吸收。1#尾砂库矿建村种植的小白菜中Pb元素含量超过国家蔬菜标准的4倍,Cu、Pb、Zn元素含量严重超过背景值。  相似文献   

邹平王家庄铜矿床成矿地球化学及成因探讨   总被引：2，自引：0，他引：2  

张军  徐兆文  李海勇  刘苏明  杨小男  陆现彩  李红超 《地质论评》2008,54(4):466-476

王家庄铜矿床的矿化脉石英中流体包裹体均一温度介于116 ~ 566 ℃之间,均值为 289 ℃;盐度介于7.2%～63.2% NaCleq,均值为21.1% NaCleq。流体的气相成分主要为H2O和CO2。在均一温度为240 ~ 440 ℃区间内,出现了富气相的两相水溶液包裹体、富液相的两相水溶液包裹体和含子晶的三相水溶液包裹体共存现象,以及加温后富气相包裹体均一到气相和同期富液相包裹体均一到液相的特征,表明成矿流体曾发生过沸腾作用;其中第一次发生于360 ~ 400 ℃,主要形成高温、高盐度含子晶的三相水溶液包裹体和高温、中盐度富液相的两相水溶液包裹体及高温、低盐度富气相的两相水溶液包裹体;第二次发生于240 ~ 320 ℃,主要形成高—中温、高盐度的含子晶的三相水溶液包裹体和高—中温、中盐度富液相的两相水溶液包裹体及高—中温、低盐度富气相的两相水溶液包裹体;之后主要形成富液相的两相水溶液包裹体,具有中低温和中盐度的特征。矿化脉石英中的δ18OH2O介于-1.14‰ ~ 1.79‰之间,均值为0.94‰;δD介于-63.70‰ ~ -56.50‰之间,均值为-59.8‰;说明王家庄铜矿床的成矿流体主要来源于岩浆,后期混入大气降水。矿石矿物的δ34S变化于-8.80‰ ~ -2.80‰之间,均值为-6.33‰。矿石矿物的n(206Pb)/n(204Pb)介于18.1684 ~ 18.3637之间,均值为18.2892;n(207Pb)/n(204Pb)介于155546 ~ 156342之间,均值为155777;n(208Pb)/n(204Pb)介于38.1286 ~ 38.4840之间,均值为38.2780。说明矿石具有贫重硫和富放射性成因铅的特征,硫、铅主要来源于深部,后期可能受到地壳物质或大气降水的混染。  相似文献