排序方式： 共有160条查询结果，搜索用时 31 毫秒
111.
The performance of a Wells turbine with various non-uniform tip clearances was investigated using computational fluid dynamics (CFD). The investigation was performed on numerical models of a NACA0020 blade profile under steady flow conditions. The performance of turbines with uniform and non-uniform tip clearances was compared. The results were also compared with experimental results in literature. It was shown that the performance of turbine with non-uniform tip clearance is similar with that of turbine with uniform one in terms of torque coefficient, input power coefficient, and efficiency. However, the turbine with non-uniform tip clearance seems to have a preferable overall performance. An investigation on the flow-field around the turbine blade was performed in order to explain the phenomena. 相似文献
112.
基于计算流体力学(CFD)模拟开展了一系列理想数值试验, 分析了城市建成区的热力作用对局地环流的影响, 模拟结果表明: 在没有背景风的情况下, 城市热岛效应可破坏海陆环流的固有转换模式, 使近地面风场总是在城市建成区上空辐合; 在有微弱背景风的情况下, 热岛效应也会导致近地层风场出现线型辐合。而城市上空总是容易出现辐合风场, 可部分解释城市局地高污染带形成的物理机制。 相似文献
113.
Flow past a circular cylinder with multiple small control rods is studied by numerical simulation for ReD ranging from 1161.3 to 6387.1. The Reynolds-Averaged-Navier–Stokes (RANS) equations and shear stress transport (SST) k − ω turbulence model are used to calculate the vortex field, while a fourth-order Runge–Kutta method is employed for evaluating the structure dynamics of the cylinder group. Comparisons with experimental results demonstrate the validation of this method. This study is concerned with the vortex induced vibration (VIV) suppression efficacy of small control rods placed around a main cylinder. The effects of control rod number, diameter ratio, spacing ratio and Reynolds number on the hydrodynamics and vibration responses of the main cylinder are investigated. The reduced percents of in-line and cross-flow amplitudes and the increased percents of the whole cross-sectional area of cylinders and the drag coefficient are used to give a comprehensive evaluation. Results of simulation indicate that placing small rods with appropriate number at appropriate locations can achieve good suppression effectiveness at a wide range of Reynolds number. The numerical result for the case with nine control rods, diameter ratio of 0.15 and spacing ratio of 0.6 shows the best suppression effect among the cases investigated in this study. 相似文献
114.
Tianye ZHU Qingyan WANG Kun YIN Siyi WANG. College of Construction Engineering Jilin University Changchun China. Key Laboratory of Underground Information Detection Technology Ministry of Education Changchun China 《东北亚地学研究》2007,10(2):196-202
The computer simulation is an important method for hydrokinetic hammer design. Various kinds of simulation measures with their technical characters and applications being taken during the computer aided design are enumerated. Computer simulation supports plenty of valuable references to the designer. Each type of simulation process is used to explore the exact aspect of the performance of hydrokinetic hammer and each type of simulation method has its own excellences and deficiencies. Thus the integrative simulation methods based on modern computational technology are brought forward to obtain the perfect capability of the whole product. Along with the development of computer hardware and software, various kinds of platforms have been provided to different simulation methods that can be carried out with distinct working flows. The jet flow element is the core part of the hydrokinetic hammer. We can build the ideal simulation model of it by means of CFD (computational fluid dynamics) technology. On the other hand, to set up the digital model of piston and hammer, the best way is to build the virtual prototype using automatic dynamic analysis of mechanical system. As a result of the argumentation, we think the technique of Virtual Prototype and CFD are the prime way to process the combined computer simulation for hydrokinetic hammer. 相似文献
115.
针对舟山群岛的海洋环境和渔业资源等情况,设计了一种正六棱柱式人工鱼礁用于改善当地的海洋生态和渔业资源。选用反映鱼礁通透性的ε值和反映鱼礁附着能力的η值两个参数对人工鱼礁的结构进行评价,通过比较发现所设计的正六棱柱式人工鱼礁在具有良好通透性的情况下还能够为海洋生物提供更大的附着面积,满足设计需求。使用Fluent软件对鱼礁进行CFD仿真,发现鱼礁迎流面前部上升流的最大高度随来流速度的增加而增加,鱼礁后方背涡流的长度约为鱼礁高度的9.3~9.6倍,表明其具有很好的水动力特性。为进一步验证鱼礁的水动力学性能,在相同尺寸、相同水域环境下对鱼礁模型设计了水槽实验,与仿真结果相互验证,证明了正六棱柱式人工鱼礁水动力性能的有效性。最后采用实地调查的方法对正六棱柱式鱼礁礁区与箱形鱼礁礁区进行建设效果的对比评价,发现两种鱼礁均能对各自所处的海洋环境起到增殖作用,正六棱柱人工礁区的平均生物密度大于对比礁区的生物密度,证明了其良好的水动力特性对增殖效果的有效性。 相似文献
116.
Computational fluid dynamics (CFD) applications are increasingly utilized for modelling complex flow patterns in natural streams and rivers. Although CFD has been successfully implemented to model many complex flow situations in natural stream settings, adequately characterizing the effects of gravel and cobble beds on flow hydraulics in CFD is a difficult challenge due to the scale of roughness lengths and the inadequacy of traditional roughness representations to characterize flow profiles in situations with large roughness elements. An alternative method of representing gravel and cobble beds is presented. Appropriate drag forces associated with different grain sizes are computed and included in the momentum equations to account for the influence of a hydraulically rough bed. Comparisons with field measurements reveal reasonable agreement between measured and modelled profiles of spatially averaged velocity and turbulent kinetic energy, and model fidelity to the non‐logarithmic behaviour of the velocity profiles. The novel method of representing coarse beds expands the utility of CFD for investigating physical processes in natural channels with large bed roughness. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
117.
潜孔锤反循环钻头体的改进与内部流场的仿真分析 总被引：1，自引：0，他引：1
介绍了潜孔锤反循环钻头改进设计的思想，运用CFD技术对钻头体内部流场进行了数值模拟与仿真分析。结果表明：卷吸作用与钻头体底部的喷射孔形成的反循环气流共同作用，加强了反循环形成效果；且钻头体内部上返风速〉15．24m／s，使岩芯得以顺利地排至地表。设计加工了带有不同倾角引射孔的钻头体模型，经实验室验证表明，当引射孔倾角为30°时形成的压力最大。将加工出的钻头用于栾川钼矿生产，钻遇采空区时或穿过采空区后，反循环都正常形成，应用该技术共完成勘探孔66个，累计进尺〉2500m，钻进时效4．08m。 相似文献
118.
复杂地形导致近地层风场时空变化大,是影响风电场短期风电功率预测准确率的重要因素。为此,基于中尺度数值预报模式和微尺度计算流体力学模式,建立了风电场短期风电功率动力降尺度预测系统。该系统由中尺度数值预报模式、微尺度风场基础数据库、风电功率预测集成系统组成,能够预测复杂地形风电场中每台风电机组未来72 h逐15 min的发电量。提高了复杂地形风场发电功率预测准确率,同时还可以在上报电网的风电功率预测结果中考虑运行维护计划和限电等因素对实际并网功率的影响。2014年7月-2015年1月的业务预测试验表明,风电场短期风电功率动力降尺度预测系统的月预测相对误差均小于0.2,满足中国国家电网对风电功率预测误差和时效性的业务要求。动力降尺度技术不受具体项目地形复杂程度和历史观测数据样本量的限制,可以在新建风电场中推广应用,具备实际的可操作性。 相似文献
119.
基于CFD技术的陡峭山体风场模拟方法研究 总被引：1，自引：0，他引：1
为更好将计算流体力学(CFD)技术应用于陡峭山体的风场模拟研究,文中对其中两个关键技术问题进行了研究,一是适宜的CFD解域顶高问题,二是入流边界条件设置方法问题。研究采用了香港国际机场的多普勒雷达径向速度观测资料,通过CFD模拟结果与观测结果对比验证展开研究。对于解域顶高,一般环境流体力学或建筑风工程领域要求顶高越高越好,例如5倍于地面障碍物的垂直高度,究其原因,主要是为了获得地面障碍物周边的整个流场结构,避免顶边界过低影响障碍物顶部流场的准确性。通过数值试验发现,若模拟关心的区域为较低海拔高度时,不必完全拘泥于该要求,对一座高度为1000m量级的山体进行模拟,顶高为3000和6000m的两组试验在边界层中低部给出的模拟结果没有显著差别。进行了3组边界条件设置方法的对比试验,结果表明单纯采用廓线法不足以充分描述来流信息,二维插值法尽管提供了更高分辨率的边界数据,但其结果总体上逊于0维插值法。研究表明,CFD可以很好地描述山地激发的涡旋/波动脱体运动,比单纯采用中尺度模式效果要好得多。在利用CFD工具研究复杂山地风场时,应本着"实用主义"的精神设置物理模型、参数和选取适当的方法、边界条件,以达到模拟精度和计算量的优化平衡,并足以用于研究所关心的具体问题。 相似文献
120.
地浸钻孔成井工艺中,目前常用的投砾设备主要有渣浆泵与各类自制投砾装置。基于引射器原理的投砾装置是一种现场应用较广的投砾装置,为了提高该投砾装置的工作效率和投砾质量,本文基于计算流体力学的数值模拟软件Fluent对引射器原理的投砾装置的引射器结构进行了数值模拟的优化分析。分析结果表明,引射器喷嘴直径对引射效果具有较大影响,引射器的引射系数随喷嘴直径的增大而逐渐减小,但较小的喷嘴直径会导致对泥浆泵的泵压负荷增大,对于现场使用的BW250型泥浆泵,要求最高压力≯6 MPa,因此引射器喷嘴的直径为5 mm时为最优值;混合室直径增大会降低引射器性能,根据砾料通过能力等确定最优参数为18 mm;混合室长度有利于提高引射器性能,本文优化值为120 mm长度时为较佳混合室管长。优化后的投砾装置较原有基于大喷嘴直径引射器的投砾装置,投砾效率和质量均有大幅提高。 相似文献