粘土矿物的提取、鉴定及其古气候意义——以柴达木盆地怀头他拉剖面为例          下载免费PDF全文

鲍晶  叶程程  栗兵帅 《干旱区地理》2022,45(3):814-825

沉积物中粘土矿物类型主要有自生粘土矿物和碎屑粘土矿物。其中,自生粘土矿物含量较少,是在沉积环境中形成,可能是沉积再循环或成岩作用的产物,可作为沉积环境某方面的指示标志;而碎屑粘土矿物是母岩风化的产物,受沉积环境影响较小,能够有效示踪物源区化学风化过程,进而反映古气候变化。近年来利用碎屑粘土矿物特征来重建物源区古气候的方法得到了广泛的应用。然而,由于粘土矿物主要存在于<2 μm硅酸盐粘粒中,粘土矿物的提取、鉴定比较困难,且自生粘土矿物易受沉积环境等的影响。因此,在利用粘土矿物重建古气候变化时,需慎重选择粘土矿物的提取方法,并考虑物源和沉积环境变化以及成岩作用等对粘土矿物解释的影响。本文以柴达木盆地东北缘怀头他拉剖面硅酸盐粘土矿物的提取、鉴定及其古环境指示意义为例,介绍粘土矿物的提取及应用,为后期粘土矿物研究提供参考。  相似文献   

Characteristics and distribution of clay minerals and their effects on reservoir quality: Huagang Formation in the Xihu Sag,East China Sea Basin     

X. L. Sun  X. G. Zhang  J. L. Lin  Z. X. Zhao  D. W. Huang 《Australian Journal of Earth Sciences》2013,60(8):1163-1174

Abstract

The characteristics and distribution of clay minerals and their effects on reservoir quality in the Huagang sandstones in the Xihu Sag, East China Sea Basin were studied by using X-ray diffraction, casting thin-sections, scanning electron microscopy, electron microprobe analysis, fluid inclusion analysis, constant-rate mercury injection and nuclear magnetic resonance. Clay minerals consist of kaolinite, chlorite, illite and illite–smectite mixed layer (I/S); kaolinite forms from dissolved feldspars, chlorite occurs as clay coatings that are transformed from clay precursors owing to the flocculation of suspended detrital clays or the crystallisation of pore fluids, and illite forms from the illitisation of detrital smectite, authigenic kaolinite and K-feldspars. Clay distribution is controlled by sedimentary environments, burial history and lithologies. Typical reservoirs in the western sub-sag are thin and developed in braided river facies at relatively shallow burial depths with clays dominated by kaolinite. However, typical reservoirs in the central inversion tectonic zone are thicker and developed in a braided delta front facies at deeper burial depths with clays mainly consisting of chlorite, illite and I/S. High-quality reservoirs are characterised by coarse granularity, high quartz content and low clay content with widespread development of chlorite coatings that inhibit quartz cements at low temperatures. At higher temperatures, the high-quality reservoirs develop more pores providing growth space for quartz cements and result in the coexistence of chlorite coatings and quartz cements. The high-quality reservoirs are controlled by their lithological characteristics rather than chlorite coatings. Illite and I/S clays create severe damage to reservoirs by reducing the size and connectivity of pore-throats.  相似文献   

Numerical modeling and neural networks to identify model parameters from piezocone tests: I. FEM analysis of penetration in two‐phase continuum     

Rafał F. Obrzud  Andrzej Truty  Laurent Vulliet 《国际地质力学数值与分析法杂志》2011,35(16):1703-1730

  相似文献   

Extension of the Griffith's fracture criteria to saturated clays     

K.M. Dgu  M. Souli  B. Ladanyi 《国际地质力学数值与分析法杂志》2003,27(4):275-288

Inglis [1] has solved the problem of distribution of stress in an elastic plate around an elliptical hole. His works clarify the role of cracks in the failure of an elastic material. However, his solution cannot be applied to saturated clay because he considers only total stresses, while, in saturated clay, the criterion of rupture should be expressed in terms of effective and not total stresses. The solution of Atkinson and Craster [2] using Biot's poroelasticity theory, shows that there is no high pore pressure in the vicinity of the crack tips for saturated clay. The major difference between this approach and the Biot's theory of is that, in saturated clay, strain is a function of the variation of the effective stress [3], while, in poroelastic media, strain is only a function of the variation of the total stress [4, Equation 2.2]. Also in their solution there is continuity between the pore fluid and the inner fluid in the crack. Their solution is valid for poroelastic media involving a movement of the pore fluid. In our solution there is no movement of the pore fluid (Undrained condition). In this paper we have solved the same problem as Inglis [1], but for the particular case of saturated clay obeying elastic law. By solving this problem we obtained the expressions for pore pressure, effective stress, total stress and displacements. The results show that not only the total stress but also the pore pressure and the effective stress are also high in the vicinity of the crack tips. A new failure criterion, based on Griffith's strain energy principle [5] and maximum tensile stress [6], valid for saturated clay is developed in this paper. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Diagenetic and low-grade metamorphic terranes of Gaspé Peninsula related to the geological structure of the Taconian and Acadian orogenic belts, Quebec Appalachians     

R. HESSE  E. DALTON 《Journal of Metamorphic Geology》1991,9(6):775-790

Abstract Illite crystallinity (IC) measurements, determination of the proportion of 2M mica-polytypes and organic-matter reflectance measurements establish regional diagenetic/low-grade metamorphic trends for the Taconian and Acadian belts of Gaspé Peninsula. IC varies as a function of many factors besides maximum burial temperature and heating time. Correlation between IC and %2M illite polytypes for the Fortin Group and Temiscouata Formation suggests (i) that the amount of high-grade detrital mica in the samples is low, and (ii) that IC can be used with some confidence as an estimator of regional thermal maturation levels. Correlation of these parameters with available organic reflectance values further supports this assumption. The illites of the Temiscouata and western Fortin groups are mostly phengitic in composition, whereas in the eastern outcrop belt they are more Mg- and Fe-rich (celadonitic), but generally also of lower grade and lower 2M content. The d(060) values for illites measured on the unorientated <2-μm fraction of samples fall between 1.502 and 1.503 Å (range: 1.500–1.504 Å), indicating relatively low octahedral occupancy by Mg and Fe (between one-fifth and one-third of the available spaces). Pyrophyllite and paragonite were not detected. Chlorites are Fe-rich and ripidolitic. The IC map for the Acadian belt of the peninsula displays general congruence between IC contours (2200 sample points) and structural trends for the 27,000-km² area. The highest grades (anchimetamorphic) are associated with the oldest rocks (Honorat and Matapedia groups) exposed in the cores of major anticlines. Anchimetamorphic grades associated with the western outcrop belt of the Lower Devonian Fortin Group require 7–8 km of subsidence to accommodate sufficient thickness of overlying younger rocks (on top of 4–5 km of Fortin Group deep-water clastics) to explain the grades in terms of burial metamorphism assuming a geothermal gradient of 30° C km^?1. The lowest-grade diagenetic rocks occupy a large area in the northeastern part of the peninsula, smaller areas in the northwestern part of the Acadian belt, in the centre of Chaleurs Bay synclinorium, and in the Ordovician Mictaw Group. The contact between the Taconian and Acadian belt is marked by a distinct maturation discontinuity. The Grand Pabos fault juxtaposes rocks of contrasting maturation levels (Matapedia Group against Fortin Group) in the west, but shows no maturation offset further east in the Honorat Group. The fault zone limiting the Fortin Group in the north is also associated with a major IC jump.  相似文献   

A classification of drainage and macropore flow in an agricultural catchment     

C. M. Heppell  F. Worrall  T. P. Burt  R. J. Williams 《水文研究》2002,16(1):27-46

This paper uses a variety of multivariate statistical techniques in order to improve current understanding of the antecedent and rainfall controls on drainage characteristics for an agricultural underdrained clay site. Using the dataset obtained from a two‐year hillslope study at Wytham (Oxfordshire, UK) a number of patterns in the nature and style of drainage events were explored. First, using principal components analysis, a distinction was drawn between drainflow controlled by antecedent conditions and drainflow controlled by rainfall characteristics. Dimensional analysis then distinguished between two further types of drainflow event: antecedent limited events (ALE) and non‐antecedent limited events (NALE). These were drainflow events requiring a minimum antecedent hydraulic head to occur (ALE) and events that occurred in response to rainfall irrespective of the antecedent conditions, because the rainfall was either of high enough intensity or duration to prompt a response in drainflow (NALE). 2. The dataset also made possible a preliminary investigation into the controls on and types of macropore flow at the site. Principal components analysis identified that rainfall characteristics were more important than antecedent conditions in generating high proportions of macropore flow in drainflow. Of the rainfall characteristics studied, rainfall amount and intensity were the dominant controls on the amount of macropore flow, with duration as a secondary control. Two styles of macropore flow were identified: intensity‐driven and duration‐driven. Intensity‐driven events are characterized by rainfall of high intensity and short duration. During such events the amount of macropore flow is proportional to the rainfall intensity and the interaction between macropore and matrix flow is kinetically limited. The second style of macropore flow is characterized by long‐duration events. For these events the amount of macropore flow approaches a maximum value whatever the rainfall duration. This suggests that these events are characterized by an equilibrium interaction between macropores and matrix flow. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Thermal conductivity and well logs: a case study in the Paris basin   总被引：3，自引：0，他引：3  

L. Demongodin  B. Pinoteau  G. Vasseur  R. Gable 《Geophysical Journal International》1991,105(3):675-691

  相似文献   

松辽盆地古龙凹陷页岩油储层中的纳孔纳缝及其原位成藏理论初探     

何文渊 《地学前缘》2023,30(1):260-280

古龙凹陷青山口组页岩油的,地质资源量达151亿t,是重要后备的油气资源。用电子背散射(HDBSD)发现了古龙页岩油储层中纳米孔和纳米缝非常发育,电子探针表明这些纳孔纳缝均被沥青充填。纳米孔的直径多在10～50 nm,中位数在20～30 nm,形态多不规则,多呈多角形,主要是一种E-F纳孔,其次为E-E纳孔,多与纳米缝联结。纳缝宽度多在10～50 nm,中位数也在20～30 nm。它们主要是由黏土片(黏土域)的F-F凝聚形成的。黏土的凝聚与有机质密切相关。黏土胶体由于同晶置换会带负电荷,使得其周围会吸附带正电的金属阳离子,形成一个带正电的黏土团。这种带正电的黏土团又会吸附带负电的腐殖酸(有机质)和初步降解的藻,形成一个有机黏土絮凝体。这种有机黏土絮凝体进入生排烃门限后,由于生排烃有机质体积会收缩,体积收缩最高可达87%。生排出的烃会就近充填在这种收缩形成的孔隙中,又由于纳孔纳缝的毛细阻力(约12 MPa)等使得排出的烃无法运移出去便形成了古龙页岩油的特殊连续原位油藏。  相似文献   

南海北部神狐海域细粒储层矿物组分对天然气水合物储集赋存的影响     

徐小蕾  白辰阳  苏丕波  马倩  张宇  梁金强 《地质论评》2023,69(6):2023060012-2023060012

为了探明矿物类型对于天然气水合物成藏的影响,笔者等利用南海北部神狐海域W07站位样品及其水合物饱和度数据,进行XRD全岩和黏土矿物测试分析、比表面积分析以及束缚水能力综合分析。结果表明,海床下110~127 m（即110~127 mbsf,meters below sea floor, 海床以下深度）为水合物储层段,海床下127~156 m为非水合物储层段。通过XRD分析可知,高石英及长石含量,低伊蒙混层含量的层段,比表面积与束缚水能力较低,说明其具有相对较好的孔渗条件,为水合物的运移与储集提供了良好的空间条件,因此形成水合物储层段;而在高伊蒙混层的层段中,比表面积较大,束缚水能力较强,其对甲烷气体及流体的吸附和束缚能力较强,对水合物成藏起到潜在的封隔作用,成为非储层段,储层与非储层段纵向叠置序列有利于优质水合物储层的形成。本次研究总结了矿物组分与优质水合物储层之间的关系,并揭示两者存在的潜在成因联系,以期丰富水合物富集成藏的基础理论,对未来南海北部天然气水合物的商业化开发提供支持。  相似文献   

昆明呈贡石灰岩上覆红黏土干缩裂隙的温度效应     

何岱洵 《地质与勘探》2023,59(5):1083-1092

温度是影响土体干缩开裂的重要外部环境因素之一。为研究温度对红黏土干缩裂隙的影响,以昆明呈贡石灰岩上覆红黏土为对象,经风干、碾碎和筛分后,选取2 mm以下的细颗粒,用正方形钢化玻璃容器制备9个厚度为10 mm的饱和泥浆样,分成3组,每组3个平行样,利用控温烘箱分别进行30℃、50℃和70℃的干燥试验,试验过程中定时称重试样和对土样表面进行拍照,然后用PCAS软件对照片进行图像处理。结果表明：红黏土的蒸发过程可分为3个阶段,干缩裂隙的形成和发展可分为5个阶段;温度升高,干燥完成时间减短,常速率阶段的蒸发速率和蒸发量增大,最终含水率降低;初始临界含水率随温度升高而增大;随着土体含水率持续减小,表面裂隙率先缓慢增加,然后快速增大,最后趋于稳定;温度升高,裂隙交点数、裂隙条数、裂隙总长度和土块数减少,裂隙平均长度、裂隙平均宽度、表面裂隙率、土块平均面积、土块最大面积、干缩厚度和干密度增大。温度显著影响红黏土的水分蒸发过程,干缩裂隙的形成和发展,以及表面裂隙结构和形态。  相似文献