Mode I fracture toughness of coal     

Ram B. Bhagat 《Geotechnical and Geological Engineering》1985,3(3):229-236

  相似文献   

Stresses and displacements due to underground mining using a finite element procedure     

H. P. Huttelmaier  P. G. Glockner 《Geotechnical and Geological Engineering》1985,3(1):49-63

Summary A two dimensional finite element procedure is applied to simulate a coal mining excavation sequence. A procedure with linear solution steps is developed and applied to an idealized mountain cross-section with exceptionally thick coal seams and large dip angle. The results provide information on pillar pressure, floor and roof stability, displacement characteristics and surface subsidence.The results presented here were obtained in the course of research sponsored by the Department of Energy, Mines and Resources, Grant No. 69-2570.  相似文献   

不同沉积环境成因煤显微组分的有机硫分布   总被引：2，自引：1，他引：2  

雷加锦  任德贻 《煤田地质与勘探》1995,23(5):14-19

运用扫描电镜能谱微区测试对不同沉积环境成因煤的有机显微组分进行有机硫含量的系统测定，结果表明在不同类型的煤中某一类显微组分的有机硫含量存在明显差异；同一煤中不同亚显微组分的有机硫含量也不同。综合分析发现煤显微组分有机硫含量主要受聚煤环境、组分凝胶化程度、氧化程度的影响，而聚煤环境为主导影响因素。  相似文献   

Nitrogen and carbon dioxide occurrence in UK coal seams     

D. P. Creedy  F. W. Pritchard 《Geotechnical and Geological Engineering》1983,1(1):71-77

Conclusions Some bituminous coals, mostly of high volatile rank, sampled from various coalfields contained on average 0.5 m³ t^–1 nitrogen and 0.13 m³ t^–1.Nitrogen is released more readily than methane during coal winning but the volumes of nitrogen released are small compared with ventilation quantities and are only likely to be of significance for detailed oxygen deficiency studies.  相似文献   

陕北煤炭基地的矿井水资源及利用   总被引：10，自引：2，他引：10  

范立民  李保平 《地下水》2007,29(5):1-3,7

简要论述了陕北地区煤矿开发的水文地质条件,对矿井水资源量、水质及利用途径进行了阐述.该区大型煤矿每天排水1 500～3 000 m3,中型煤矿也有500 m3左右,小煤矿每天排水30～100 m3,利用好矿井疏干水,不仅可以解决能源化工基地建设的用水需求,而且符合国家产业政策和环境保护的要求,是陕北能源化工基地建设的必然选择.  相似文献   

Thermal surface characteristics of coal fires 1 results of in-situ measurements     

Jianzhong Zhang  Claudia Kuenzer   《Journal of Applied Geophysics》2007,63(3-4):117-134

Natural underground coal fires are fires in coal seams occurring subsurface. The fires are ignited through a process named spontaneous combustion, which occurs based on a natural reaction but is usually triggered through human interaction. Coal mining activities expose coal to the air. This leads to the exothermal oxidation of the carbon in the coal with the air's oxygen to CO₂ and – under certain circumstances – to spontaneous combustion. Coal fires occur in many countries world wide – however, currently the Chinese coal mining industry faces the biggest problems with coal fires. Coal fires destroy the valuable resource coal and furthermore lead to many environmental degradation phenomena such as the deterioration of surrounding vegetation, land subsidence and the emission of toxic gasses (CO, N₂O). They additionally contribute to the emission of green house relevant gasses such as CO₂ and CH₄ to the atmosphere.In this paper we present thermal characteristics of coal fires as measured in-situ during a field campaign to the Wuda coal fire area in south-central Inner Mongolia, China. Thermal characteristics include temperature anomaly measurements at the surface, spatial surface temperature profiles of fire areas and unaffected background areas, diurnal temperature profiles, and temperature measurements inside of coal fire induced cracks in the overlying bedrock. For all the measurements the effects of uneven solar heating through influences of slope and aspect are considered.Our findings show that coal fires result in strong or subtle thermal surface anomalies. Especially the latter can easily be influenced by heating of the surrounding background material through solar influences. Temperature variation of background rocks with different albedo, slope, aspect or vegetation cover can substantially influence the detectability of thermal anomalies. In the worst case coal fire related thermal anomalies can be completely masked by solar patterns during the daytime. Thus, night-time analysis is the most suitable for thermal anomaly mapping of underground coal fires, although this is not always feasible. The heat of underground coal fires only progresses very slowly through conduction in the rock material. Anomalies of coal fires completely covered by solid unfractured bedrock are very weak and were only measured during the night. The thermal pattern of underground coal fires manifested on the surface during the daytime is thus the pattern of cracks and vents, which occur due to the volume loss underground and which support radiation and convective energy transport of hot gasses. Inside coal fire temperatures can hardly be measured and can only be recorded if the glowing coal is exposed through a wider crack in the overlaying bedrock. Direct coal fire temperatures measured ranged between 233 °C and 854 °C. The results presented can substantially support the planning of thermal mapping campaigns, analyses of coal fire thermal anomalies in remotely sensed data, and can provide initial and boundary conditions for coal fire related numerical modeling.In a second paper named “Thermal Characteristics of Coal Fires 2: results of measurements on simulated coal fires” [Zhang J., Kuenzer C., Tetzlaff A., Oettl D., Zhukov B., Wagner W., 2007. Thermal Characteristics of Coal Fires 2: Result of measurements on simulated coal fires. Accepted for publication at Journal of Applied Geophysics. doi:10.1016/j.jappgeo.2007.08.003] we report about thermal characteristics of simulated coal fires simulated under simplified conditions. The simulated set up allowed us to measure even more parameters under undisturbed conditions — especially inside fire temperatures. Furthermore we could demonstrate the differences between open surface coal fires and covered underground coal fires. Thermal signals of coal fires in near range thermal remotely sensed imagery from an observing tower and from an airplane are presented and discussed.  相似文献   

Coal facies evolution of the main minable coal-bed in the Heidaigou Mine, Jungar Coalfield, Inner Mongolia, northern China     

DAI ShiFeng  REN DeYi  LI ShengSheng  ZHAO Lei  ZHANG Yong   《中国科学D辑(英文版)》2007,50(6):144-152

The No. 6 Coal-bed from the Heidaigou Mine, Jungar Coalfield, Inner Mongolia is a super-large Ga deposit. The dominant carrier of Ga is boehmite in coal. The study of coal facies may provide genetic enrichment information of Ga and its carrier (boehmite) in the Ga deposit. On the basis of study on coal petrology and mineralogy, it was found that the No. 6 Coal-bed from the Heidaigou Mine of Jungar was enriched in inertinites and the microlitho-types were dominated by clarodurite. The maceral morphological features and association indicate that the coal-bed was formed in a dry sedimentary environment or in a periodic dry sedimentary environment caused by the alternating variations of groundwater level. The optimum conditions for the enrichment of Ga and its particular carrier (boehmite) were dominated by four transitional conditions (1) the upper delta plain which was the transitional zone between alluvial and lower delta plains, (2) the transitional zone between the dry and wet forest swamps, being slightly apt to the dry one, (3) the transitional tree density between the thick and loose ones, and (4) the low moor that was the transitional zone between two high moors during peat accumulation.  相似文献   

江苏南部地区煤层气资源   总被引：1，自引：0，他引：1  

李建青 《江苏地质》2002,26(4):200-202

根据江苏南部地区二叠系龙潭组煤系的分布和规模、煤矿瓦斯涌出特征、煤的产气能力、煤层的储集条件等煤层气地质条件综合研究工作，认为该区煤层气资源存在一定的勘探开发前景，对各典型含煤区块煤层气综合评价出有远景区（A类）、较有远景区（B类）和远景差区（C类）。  相似文献   

云南禄丰煤岩与围岩中富勒烯（C60）物质的初步探索   总被引：3，自引：0，他引：3  

梁汉东  李艳芳等 《岩石学报》2002,18(3):419-423

中国云南煤中是否存在富勒烯还没有科学定论。本工作运用高效液相色谱方法，对中国云南禄丰晚三叠世煤岩及其围岩中是否存在天然富勒烯物质的问题进行了探索性研究；同时发展了适于从复杂地质样品中分离纯化富勒烯和定性与定量检测富勒烯的一套技术方法。结果显示，从定性角度有两个样品确实存在富勒烯。本文据此提出，富勒烯的赋存与煤岩／围岩交互相上的含煤碳质泥岩有着密切的关系。下一步研究应着重调查比煤岩与顶板和底板界面层并大力研究其中天然富勒烯的地学成因。本工作的意义还在于为今后我国加入和独立开展以富勒烯类物质（如C60／C70）及其衍生物质（如He C60 C70)作为地球化学示踪物的古地球突变大事件的研究，奠定了实验方法学基础。  相似文献   

TOF-SIMS在源岩单组分研究中的应用   总被引：1，自引：0，他引：1  

李荣西  梁汉东 《地学前缘》2001,8(2):421-423

应用飞行时间二次离子质谱 (TOF SIMS)对源岩单组分进行原位微分析 ,结果表明有机组分(1)二次离子峰集中分布在低质量数一端 ;(2 )无机离子峰强度普遍高于有机离子峰 ;(3)同类型相邻的有机离子峰之间相差一定单位的质量 (14,即CH2 ) ;(4 )不同有机组分峰强度最大的有机离子相同 ,但它们峰的相对强度差异非常明显 ,借助有机离子峰的相对强度可以反映有机组分的化学结构及其生烃性特征。  相似文献