Does compaction-induced subsidence control accommodation space at the top of prograding carbonate platforms? Constraints from the numerical modelling of the Triassic Esino Limestone (Southern Alps,Italy)     

《Marine and Petroleum Geology》2016

The demise of the high-relief, steep-slope, prograding Ladinian-Early Carnian carbonate platforms of the Esino Limestone (Central Southern Alps of Italy) is marked by subaerial exposure of the platform top associated with different erosional (mainly karst-related), depositional and diagenetic processes (Calcare Rosso). The exposure-related deposits consist of three major facies associations: 1) residual soils with thin lenses of conglomerates with black pebbles, and, locally, weathered vulcanites; 2) chaotic breccia lenses irregularly distributed in the uppermost part of the Esino Limestone carbonate platform, interpreted as collapse breccias in karstic setting: 3) inter-supratidal carbonate cycles with dissolution and development of paleosols and tepee structures.Facies distribution follows the sub-environments of the underlying Esino Limestone. Facies 1 and 2 typically characterize the core of the platform, covering the underlying inner platform facies. Facies 3 instead develops toward the edge of the platform, above reef-upper slope facies of the prograding facies of the Esino Limestone. The thickness of facies 3 decreases toward the core of the platform. Facies distribution reflects differences in the accommodation space and sedimentary processes from the rim (highest accommodation, favouring the deposition of peritidal-supratidal carbonates) to the core (reduced accommodation, causing pedogenesis and karstification) of the carbonate system.The observed thickness changes may be controlled by different factors: 1) syndepositional tectonics, 2) subsidence induced by magmatic activity or 3) differential subsidence controlled by the stratigraphic architecture of the Esino Limestone platform and adjoining basins. As evidence of tectonics was not observed and the presence of volcanic bodies is only documented tens of km away from the study area, the scenario involving the creation of accommodation space by compaction of the basinal sediments (resedimented, fine-grained calciturbidites) during the progradation of the carbonate platform is here investigated. Numerical modelling was performed to verify the compatibility of compaction-induced subsidence with the observed depositional architecture. The models were built to simulate the architectural evolution of the platform by progressively adding layers from deepest to shallowest, while compacting the underlying sediments, in order to evaluate compaction-induced subsidence (and accommodation space for the Calcare Rosso) after the deposition of the youngest platform strata. Modelling results allow us to conclude that the wedge geometry of the Calcare Rosso, deposited on top of the extinct Esino carbonate platform, can be explained by subsidence controlled by compaction of the basinal sediments present below the early-cemented, fast prograding platform slope deposits.  相似文献   

东山乌礁湾海滩表层沉积物粒度时空变化分析     

周在明  杨燕明  陈本清 《海洋科学》2016,40(10):82-90

为了进一步了解海岛岬湾海岸表层沉积物粒度的时空分布特征和形成机制,作者以福建东山岛乌礁湾为典型研究区,通过秋、春、夏3个不同季节海滩表层沉积物的采集和点位测量,综合应用激光法和筛析法进行粒度测定。结果表明,东山乌礁湾海滩表层沉积物以0.16～0.50 mm之间的中、细砂为主,并含有少量的粗砂和细砾,这与区域砂质沉积背景有关;湾内从南到北剖面沉积物粒径由粗砂到细砂逐渐变细,主要受剖面地形、局地物源、季节性风浪作用和近岸往复水动力的影响。时间变化上,各取样站位表现出沉积物粒径粗、细不同程度的多种变化趋势,以秋季为参考,整体上表现为由南到北粒级的变小、增大和稳定,这与东北、南南西季风影响下的浪、潮作用以及沿岸流系格局变化下的水动力环境有关。  相似文献   

高频地波雷达海杂波背景下的船只目标检测研究进展     

王祎鸣 《海洋科学》2016,40(10)

针对海杂波对高频地波雷达目标检测的干扰问题,分目标处于海杂波谱区之内和之外两种情况综述了海杂波背景下的目标检测方法。对于海杂波内目标检测的难题,介绍了一种基于现场海态同步观测信息的检测新思路以及初步验证结果。对国内外相关研究进展的归纳总结和新思路的提出,为提出更加有效的海杂波干扰下的目标检测方法提供了重要的参考。  相似文献   

热稳定κ-卡拉胶酶产生菌Bacillus sp. Car19的发酵条件优化     

谢买胜  李江  林学政  何培青 《海洋科学》2016,40(11):7-16

对一株分泌热稳定κ-卡拉胶酶印尼热泉菌进行了种属鉴定, 并采用响应面法对该菌发酵产酶条件进行了优化。鉴定结果表明, 该菌株属于芽孢杆菌属(Bacillus), 命名为Bacillus sp. Car19(GeneBank: KT865196)。发酵条件优化结果显示, 9个环境因子影响Bacillus sp. Car19产酶量。其中影响Bacillus sp. Car19产酶量的三个主要因素分别为培养温度、培养基中Cu²⁺浓度和培养基中NaCl浓度。综合次要因素对Bacillus sp. Car19产酶影响, Bacillus sp. Car19最佳产酶发酵条件为: 培养温度52.31℃、Cu²⁺浓度6.93 mmol/L、NaCl浓度37.03 g/L, 培养基pH为6, 接种量1%, 培养时间36h, 半乳糖浓度0.3 g/L,硝酸铵浓度7g/L, 卡拉胶浓度0.5g/L。优化后发酵上清液酶活力达到15.21 U/mL, 与优化前相比提高了1.5 倍。  相似文献   

基于SMOS卫星数据的海表面盐度模型     

赵红  王成杰 《海洋技术学报》2016,(1):15-22

海表面盐度是研究海洋对全球气候影响以及大洋环流的重要参量之一,而卫星遥感技术是获取海表面盐度数据的最有效方法.目前,L波段的SMOS和Aquarius/SAC-D遥感卫星正在用于探测海表面盐度,并根据卫星观测数据和物理机制反演出海表面盐度的产品.但在某些近陆地区域,由于淡水流入及陆地射频(RFI)等因素影响,卫星反演盐度的产品精度较低.文中利用“东方红2号”科学考察船的实测数据、SMOS卫星数据,首次针对中国南海海域提出了用贝叶斯网络模型计算海表面盐度,并用验证数据集(实测Argo盐度)对模型进行适应性评估.经过计算,模型误差和验证误差分别为0.47 psu和0.45 psu,而相应的SMOS Level 2产品的精度分别为1.90 psu和1.82 psu.此模型为海表面盐度的计算提供了一个新方法.  相似文献   

抛锚撞击水下管汇的数值模拟研究     

娄敏  王艳红  明海芹 《海洋工程》2016,34(4):38-46

船舶抛锚撞击水下管汇会影响到管汇的正常作业,基于ANSYS/LS-DYNA动力学分析软件,建立锚-水下管汇-海床土体的三维有限元模型,对抛锚碰撞水下管汇的过程进行数值仿真。通过求解水下管汇受碰撞后的等效应力、应变的时间历程及受撞击部位的凹陷损伤深度,发现最大等效应力点出现在管汇与锚接触位置处,管汇的碰撞部位最终发生凹痕变形。同时讨论锚与管汇接触面的形状以及海床土体对水下管汇损伤程度的影响,当冲击能量相同时,锚与水下管汇的碰撞接触面积越小,水下管汇的损伤深度就越大;当锚与管汇接触的接触面积相同时,冲击能量越大,水下管汇的损伤变形越大。海床土体的剪切弹性模量对管汇的凹陷损伤深度以及最大等效应力影响与冲击能量有关,海床土体的内摩擦角对管汇的碰撞影响较小。  相似文献   

淤泥质潮滩地貌演变中的水动力及生物过程研究进展   总被引：2，自引：0，他引：2  

王宁舸  龚政  张长宽  赵堃  耿亮 《海洋工程》2016,34(1):104-116

淤泥质潮滩对于海岸防护、增加土地资源、保持生物多样性等具有重要作用。从淤泥质潮滩演变的主要驱动因子——潮流、波浪、生物作用及地下过程四个方面回顾和总结了潮滩演变动力地貌过程的相关研究进展,提出应关注潮滩短期演变规律、波浪与浮泥作用机理、生物生长与潮滩演变定量关系,以及地下过程作用机理等。  相似文献   

Geostatistical analysis of variations in soil salinity in a typical irrigation area in Xinjiang, northwest China     

Mamattursun Eziz  Mihrigul Anwar  XinGuo Li 《寒旱区科学》2016,8(2):147-155

Characterizing spatial and temporal variability of soil salinity is tremendously important for a variety of agronomic and environmental concerns in arid irrigation areas. This paper reviews the characteristics and spatial and temporal variations of soil salinization in the Ili River Irrigation Area by applying a geostatistical approach. Results showed that:(1) the soil salinity varied widely, with maximum value of 28.10 g/kg and minimum value of 0.10 g/kg, and was distributed mainly at the surface soil layer. Anions were mainly SO_4~(2-) and Cl~-, while cations were mainly Na~+ and Ca~(2+);(2) the abundance of salinity of the root zone soil layer for different land use types was in the following order: grassland cropland forestland. The abundance of salinity of root zone soil layers for different periods was in the following order: March June September;(3) the spherical model was the most suitable variogram model to describe the salinity of the 0–3 cm and 3–20 cm soil layers in March and June, and the 3–20 cm soil layer in September, while the exponential model was the most suitable variogram model to describe the salinity of the 0–3 cm soil layer in September. Relatively strong spatial and temporal structure existed for soil salinity due to lower nugget effects; and(4) the maps of kriged soil salinity showed that higher soil salinity was distributed in the central parts of the study area and lower soil salinity was distributed in the marginal parts. Soil salinity tended to increase from the marginal parts to the central parts across the study area. Applying the kriging method is very helpful in detecting the problematic areas and is a good tool for soil resources management. Managing efforts on the appropriate use of soil and water resources in such areas is very important for sustainable agriculture, and more attention should be paid to these areas to prevent future problems.  相似文献   

Land-surface segmentation as a method to create strata for spatial sampling and its potential for digital soil mapping     

L. Drăguţ  A. Dornik 《International journal of geographical information science》2016,30(7):1359-1376

Sampling efforts are constrained by limited availability of resources. Therefore, methods to reduce the number of samples, while still achieving reasonable accuracy are needed. Land-surface segmentation (LSS) has proven a powerful technique to partition digital elevation models (DEMs) and their derivatives into relatively homogeneous areas, which can be further employed as support in soil sampling. Though topography is one of the main soil forming factors, a robust assessment of the potential of this technique to digital soil mapping (DSM) is still missing. In this study, we aimed at evaluating the potential of LSS in stratifying a landscape into relatively homogeneous areas, which can be used as strata for guiding the selection of sampling points in DSM. The experiments were carried out in two study areas where soil samples were available. Land-surface derivatives were derived from DEMs and segmented with a tool based on the multiresolution segmentation algorithm, into objects considered as homogeneous soil-landscape divisions. Thus, one sample was randomly selected within each segment from the existing sample data, based on which predictions of soil classes/sub-orders and properties, i.e. soil texture and A-horizon thickness, were made. Results were compared with predictions based on simple random sampling (SRS) and conditioned Latin hypercube (cLHS). The segmentation-based sampling (SBS) scheme performed better than SRS and cLHS schemes in predicting the A-horizon thickness, soil texture fractions and soil classes, showing a high potential of LSS in stratifying a landscape for the purposes of DSM. The novelty of this study is in the way strata are constructed, rather than in the sampling design itself. Further research is needed to demonstrate the value of a SBS design for practical use. The analyses presented here further highlight the importance of considering locally adaptive techniques in optimization of sampling schemes and predictions of soil properties.  相似文献   

Bias estimation and correction for triangle-based surface area calculations     

Shuqiang Xue  Jiping Liu  Jinzhong Mi  Chun Dong  Yingyan Cheng 《International journal of geographical information science》2016,30(11):2155-2170

The calculation of surface area is meaningful for a variety of space-filling phenomena, e.g., the packing of plants or animals within an area of land. With Digital Elevation Model (DEM) data we can calculate the surface area by using a continuous surface model, such as by the Triangulated Irregular Network (TIN). However, just as the triangle-based surface area discussed in this paper, the surface area is generally biased because it is a nonlinear mapping about the DEM data which contain measurement errors. To reduce the bias in the surface area, we propose a second-order bias correction by applying nonlinear error propagation to the triangle-based surface area. This process reveals that the random errors in the DEM data result in a bias in the triangle-based surface area while the systematic errors in the DEM data can be reduced by using the height differences. The bias is theoretically given by a probability integral which can be approximated by numerical approaches including the numerical integral and the Monte Carlo method; but these approaches need a theoretical distribution assumption about the DEM measurement errors, and have a very high computational cost. In most cases, we only have variance information on the measurement errors; thus, a bias estimation based on nonlinear error propagation is proposed. Based on the second-order bias estimation proposed, the variance of the surface area can be improved immediately by removing the bias from the original variance estimation. The main results are verified by the Monte Carlo method and by the numerical integral. They show that an unbiased surface area can be obtained by removing the proposed bias estimation from the triangle-based surface area originally calculated from the DEM data.  相似文献