塔里木克拉通东北缘二叠纪镁铁质岩浆氧化物与硫化物成矿条件对比     

徐文博  张铭杰  包亚文  满毅  李思奥  王鹏 《地质学报》2022,96(12):4257-4274

塔里木克拉通东北缘坡北、磁海等地二叠纪幔源岩浆活动形成了镍钴硫化物矿床和铁钴氧化物矿床，两者赋矿镁铁 超镁铁岩体的年龄相近(290~260 Ma)，主、微量元素和Sr Nd Hf同位素组成相似，分配系数接近的微量元素比值分布于相同趋势线，揭示两者岩浆源区相同，可能为俯冲板片流体交代的亏损地幔或软流圈地幔。两类矿床镁铁 超镁铁质岩中Co与Ni含量正相关，Co主要富集在基性程度高的岩石中；块状硫化物与磁铁矿矿石中Co与Ni相关性差，Co和Ni具有不同的富集机制，Co热液富集作用明显。北山镁铁 超镁铁杂岩体是地幔柱相关软流圈上涌，诱发俯冲板片交代的亏损岩石圈地幔发生部分熔融，形成的高镁母岩浆演化过程中经历壳源混染、硫化物饱和富集镍钴形成铜镍钴硫化物矿床，富铁母岩浆氧逸度高、富水，岩浆分离结晶磁铁矿、叠加热液作用富集钴，形成铁钴氧化物矿床。  相似文献   

深部矿产资源立体地球化学勘查方法技术体系     

史长义  王惠艳 《地质学报》2022,96(11):3705-3721

深部矿产资源的勘查是战略性矿产资源勘查的一个重要方面。找矿实践证明，化探方法技术在矿产勘查乃至深部找矿中发挥了重要的、不可或缺的作用。找矿工作的不断深入和找矿难度的不断加大，促使化探方法技术不断的发展和完善，在传统方法技术的基础上，研发出了许多新的方法技术。本文从方法论和系统论的角度出发，对现有的找寻深部隐伏矿盲矿的有效化探方法技术进行了系统的归纳和总结，提出了立体地球化学勘查方法技术体系的概念，将立体地球化学勘查方法技术划分为地面地球化学测量方法技术和地下地球化学测量方法技术，建立了深部矿产资源立体地球化学勘查方法技术体系。不同的方法技术有不同的优势和不同的适用条件，实际工作中应当根据不同的勘查阶段，不同的勘查目的和不同的地质地球化学条件选择不同的立体方法技术组合才能发挥出最大效益，取得最大效果。  相似文献   

中国南方离子吸附型稀土矿床成矿类型及其母岩控矿因素探讨     

付伟  赵芹  罗鹏  李佩强  陆济璞  周辉  易泽邦  许成 《地质学报》2022,96(11):3901-3923

传统认为中国南方的离子吸附型稀土矿床可划分为以“足洞式”为代表的重稀土型和以“河岭式”(或“花山式”)为代表的轻稀土型两种矿化类型。然而，近年来发现的许多矿床(如清溪、寨背和馒头山等)的赋矿风化壳中出现了轻稀土矿与重稀土矿并存现象，表现出特殊的“上轻下重”双层矿体结构。这指示了除重稀土型和轻稀土型之外，还存在着轻重稀土共生型的过渡类型。本研究通过对三种不同成矿类型的若干典型矿床系统对比，指出成矿类型的多样性与母岩性质密切相关，尤其是母岩的稀土元素地球化学和稀土载体矿物属性是制约成矿类型变化的关键因素。统计数据表明，从重稀土型→轻重稀土共生型→轻稀土型，成矿母岩的全岩稀土总量变化不大(ΣREY: 200×10-6~450×10-6→200×10-6~500×10-6→200×10-6~800×10-6)，但轻重稀土配分值出现较显著的区间性差异(ΣLREE/ΣHREY: 02~1→1~5→2~10)。与之同时，母岩中能为离子相稀土提供物源且具有重稀土配分属性的稀土副矿物类型和数量明显减少，这与全岩稀土元素地球化学特征中重稀土分量占比的降低趋势也互相匹配。该结果指示，以往认为重稀土配分母岩形成重稀土矿床、轻稀土配分母岩形成轻稀土矿床的传统观点需要外延，即一部分具有低度轻稀土配分属性(1＜ΣLREE/ΣHREY＜5)且含有丰富易风化稀土副矿物的母岩还可能形成轻重稀土共生型矿床，该认识可为今后离子吸附型稀土矿床勘查工作提供新的找矿依据。  相似文献   

High-resolution sequence stratigraphy of the Lower Triassic ‘Buntsandstein’ in the Netherlands and northwestern Germany     

Geluk  M.C.  Röhling  H.-G. 《Geologie en Mijnbouw》1997,76(3):227-246

Detailed log correlations of the largely fluvio-lacustrine Lower Triassic Buntsandstein (Late Permian-Early Anisian), carried out on 80 wells in the Dutch onshore and offshore areas, can be linked to northwest-German high-resolution sequence stratigraphy. The correlations show that cyclic sedimentation occurred in large parts of the basin. Seven 1st-order sequences are recognised, namely the Main Claystone, Rogenstein, Volpriehausen, Detfurth, Hardegsen, Solling and Lower Röt Sequences. They are overlain by the lower part of the Upper Röt–Lower Muschelkalk Sequence. Distinct sequence boundaries have been identified at the bases of four sequences: Volpriehausen, Detfurth, Solling and Upper Röt. The higher-order sequences consist of fining-upwards cycles with a thickness of up to tens of metres. The sequences are laterally persistent and have a characteristic expression on gamma-ray and sonic logs. In the Lower Buntsandstein, they display a uniform character throughout most of the area, with only minor differences in thickness or lithology. NNE-oriented lows and swells were formed during deposition of the Volpriehausen, Detfurth and Hardegsen Sequences. Uplift prior to the deposition of the Solling Sequence caused deep erosion on the swells in the basin and minor erosion in the lows. The high-resolution sequences probably represent alternating, relatively wet and dry climatic periods, with a periodicity of about 100 000 years. An analysis of the sequences suggests that their reduced thickness on the swells is mainly the effect of erosion. This is supported by analyses of the accumulation patterns and rates.  相似文献   

Sector collapse,sedimentation and clast population evolution at an active island-arc volcano: Stromboli,Italy   总被引：1，自引：0，他引：1  

P. Kokelaar  C. Romagnoli 《Bulletin of Volcanology》1995,57(4):240-262

Sciara del Fuoco is the subaerial part of a partially filled sector-collapse scar that extends to 700 m below sea level on Stromboli volcano. The collapse occurred <5000 years ago, involved 1.81 km³ of rock and is the latest of a series of major collapses on the north-west flank of Stromboli. A north-east trending arc-axial fault system channels magmas into the volcano and has caused tilting and/or downthrow to the north-west. The slope of the partial cone constructed between the lateral walls of the collapse scar acts as a channelway to the sea for most eruptive products. From 700 m below sea level and extending to >2200 m and >10 km from the shore to the NNW, a fan-shaped mounded feature comprises debris avalanche deposits (>4 km³) from two or more sector collapses. Volcaniclastic density currents originating from Sciara del Fuoco follow the topographic margin of the debris avalanche deposits, although overbank currents and other unconfined currents widely cover the mounded feature with turbidites. Historical (recorded) eruptive activity in Sciara del Fuoco is considerably less than that which occurred earlier, and much of the partial fill may have formed from eruptions soon after the sector collapse. It is possible that a mass of eruptive products similar to that in the collapse scar is dispersed as volcanogenic sediment in deep water of the Tyrhennian basin. Evidence that the early post-collapse eruptive discharge was greater than the apparent recent flux (2kg/s) counters suggestions that a substantial part of Stromboli's growth has been endogenous. The partial fill of Sciaria del Fuoco is dominated by lava and spatter layers, rather than by the scoria and ash layers classically regarded as main constituents of Strombolian (cinder) cones. Much of the volcanic slope beneath the vents is steeper than the angle of repose of loose tephra, which is therefore rapidly transported to the sea. Delicate pyroclasts that record the magmatic explosivity are selectively destroyed and diluted during sedimentary transport, mainly in avalanches and by shoreline wave reworking, and thus the submarine deposits do not record well the extent and diversity of explosive activity and associated clast-forming processes. Considerable amounts of dense (non-vesicular) fine sand and silt grains are produced by breakage and rounding of fragments of lava and agglutinate. The submarine extension of the collapse scar, and the continuing topographic depression to >2200 m below sea level, are zones of considerable by-passing of fine sand and silt, which are transported in turbidity currents. Evidently, volcanogenic sediments dispersed around island volcanoes by density currents are unlikely to record well the true spectrum and relative importance of clast-forming processes that occurred during an eruption. Marine sedimentary evidence of magmatic explosivity is particularly susceptible to partial or complete obliteration, unless there is a high rate of discharge of pyroclastic material into the sea.  相似文献   

A multivariate statistical and geostatistical study on the geochemistry of allochtonous karst bauxite deposits in Hungary     

Bárdossy  George  Kovács  Ó. 《Natural Resources Research》1995,4(2):138-153

A geochemical evaluation of the Szc-Halimba-Kisld area, Hungary, covering an area of more than 200 km² is presented using different statistical and geostatistical methods. The study area is a representative example of allochtonous karst bauxite accumulation. The three groups of deposits studied here have been explored and mined since 1950. Several thousand boreholes have been drilled, and bauxite cores were analyzed for the five main chemical components. A total of 80,000 pleces of analytical data were processed, followed by a geological examination of borehole logs and of mining excavations.The quantitative geochemical evaluation of the data set led to both geochemical and practical results: The geochemical behavior of the allochtonous, clastic karst bauxite deposits differs essentially from that of the autochtonous and parautochtonous ones, as well as that of the lateritic bauxite deposits. The deposits of the study area can be split into several subsequent geochemical-sedimentological units, each representing an event of bauxite transport and accumulation. Clear regional patterns can be revealed in the composition of these units. The geostatistically measured chemical variability of the geochemical units is rather different, the lowest units showing the smallest variability. The interrelations of the main chemical components are weaker and more irregular in the studied deposits than in the autochtonous lateritic bauxite deposits. Additional local genetic features, such as transport routes, can be delineated by the methods applied. Within each deposit, local changes of chemical composition and of its variability can be determined more precisely. These results can be used in bauxite prospecting and exploration, because areas of high or low bauxite quality can be predicted.  相似文献   

Interactive effects of the type of milling media and CuSO₄ addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability     

Z. Ekmekci  D.J. Bradshaw  P.J. Harris  A.M. Buswell 《International Journal of Mineral Processing》2006

The limitations of pulp chemistry measurements in the flotation of a platinum group mineral (PGM) bearing Merensky ore were demonstrated in Part 1 of this article. In this paper the importance of the contribution of the froth structure due to changing froth stability is analysed using the batch flotation data. The effects of mild steel (MS) and stainless steel (SS) milling media and the addition of copper sulphate on the flotation performance of the sulphide minerals in Merensky ore have been evaluated in relation to the changes in stability of the froth phase. The effects of pulp chemistry and froth stability on the flotation of sulphide minerals were distinguished by using two different rate constants (k_t and k_w). The rate constant (k_w) calculated as a function of cumulative water recovery was used to describe characteristics of froth phase and k_t was calculated as a function of flotation time. The results revealed that the type of grinding media and copper sulphate addition had an interactive effect on the froth stability. While mild steel (MS) milling increased the froth stability due to the presence of hydrophilic iron hydroxides and colloidal metallic iron, the addition of copper sulphate reduced the stability, especially with stainless steel (SS) milling. Copper sulphate addition had a dual role in the flotation of Merensky ore in that it caused destabilisation of the froth zone as well as activation of selected sulphide minerals. The dominant effect was found to depend on the type of milling media and floatability of the mineral in question and this work has demonstrated the importance of using a combination of measurements to evaluate flotation performance holistically.  相似文献   

Fluid salinities obtained by infrared microthermometry of opaque minerals: Implications for ore deposit modeling — A note of caution     

Robert Moritz   《Journal of Geochemical Exploration》2006,89(1-3):284

Infrared microthermometry of opaque minerals has revealed that temperatures of phase changes vary with the infrared light source intensity, resulting in an overestimate of fluid salinities and an underestimate of homogenization temperatures. Failing to recognize this analytical artifact during infrared microthermometry may result in meaningless geological models. A fluid inclusion investigation on enargite from a high-sulfidation epithermal deposit is used as an example to document this. Fluid salinities obtained during an early investigation ranged between 6.3 and 20.4 wt.% NaCl, which were interpreted as intense boiling or as evidence for the involvement of a magmatic brine during ore formation. Fluid inclusion salinities obtained with improved analytical settings, i.e. low light intensities, fall between 1.1 and 1.7 wt.% NaCl and are in better agreement with fluid salinities obtained in quartz from similar deposits, and recent modeling suggesting vapor transport of Au and Cu from deep porphyry-Cu environments to shallower high-sulfidation epithermal deposits.  相似文献   

Stratigraphic evolution of a fluvial–eolian succession: The example of the Upper Jurassic—Lower Cretaceous Guará and Botucatu formations, Paraná Basin, Southernmost Brazil     

Claiton M.S. Scherer  Ernesto L.C. Lavina 《Gondwana Research》2006,9(4):475-484

The Guará and Botucatu formations comprise an 80 to 120 m thick continental succession that crops out on the western portion of the Rio Grande do Sul State (Southernmost Brazil). The Guará Formation (Upper Jurassic) displays a well-defined facies shift along its outcrop belt. On its northern portion it is characterised by coarse-grained to conglomeratic sandstones with trough and planar cross-bedding, as well as low-angle lamination, which are interpreted to represent braided river deposits. Southwards these fluvial facies thin out and interfinger with fine- to medium-grained sandstones with large-scale cross-stratification and horizontal lamination, interpreted as eolian dune and eolian sand sheets deposits, respectively. The Botucatu Formation is characterised by large-scale cross-strata formed by successive climbing of eolian dunes, without interdune and/or fluvial accumulation (dry eolian system). The contact between the Guará and the Botucatu formations is delineated by a basin-wide deflation surface (supersurface). The abrupt change in the depositional conditions that took place across this supersurface suggests a major climate change, from semi-arid (Upper Jurassic) to hyper-arid (Lower Cretaceous) conditions. A rearrangement of the Paraná Basin depocenters is contemporaneous to this climate change, which seems to have changed from a more restrict accumulation area in the Guará Formation to a wider sedimentary context in the Botucatu Formation.  相似文献   

Origin of fluids in iron oxide–copper–gold deposits: constraints from δ 37Cl, 87Sr/86Sri and Cl/Br     

Massimo Chiaradia  Dave Banks  Robert Cliff  Robert Marschik  Antoine de Haller 《Mineralium Deposita》2006,41(6):565-573

The origin of the hypersaline fluids (magmatic or basinal brine?), associated with iron oxide (Cu–U–Au–REE) deposits, is controversial. We report the first chlorine and strontium isotope data combined with Cl/Br ratios of fluid inclusions from selected iron oxide–copper–gold (IOCG) deposits (Candelaria, Raúl–Condestable, Sossego), a deposit considered to represent a magmatic end member of the IOCG class of deposit (Gameleira), and a magnetite–apatite deposit (El Romeral) from South America. Our data indicate mixing of a high δ ³⁷Cl magmatic fluid with near 0‰ δ ³⁷Cl basinal brines in the Candelaria, Raúl–Condestable, and Sossego IOCG deposits and leaching of a few weight percent of evaporites by magmatic-hydrothermal (?) fluids at Gameleira and El Romeral. The Sr isotopic composition of the inclusion fluids of Candelaria, Raúl–Condestable, and El Romeral confirms the presence of a non-magmatic fluid component in these deposits. The heavy chlorine isotope signatures of fluids from the IOCG deposits (Candelaria, Raúl–Condestable, Sossego), reflecting the magmatic-hydrothermal component of these fluids, contrast with the near 0‰ δ ³⁷Cl values of porphyry copper fluids known from the literature. The heavy chlorine isotope compositions of fluids of the investigated IOCG deposits may indicate a prevailing mantle Cl component in contrast to porphyry copper fluids, an argument also supported by Os isotopes, or could result from differential Cl isotope fractionation processes (e.g. phase separation) in fluids of IOCG and porphyry Cu deposits.  相似文献