Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps     

Martin Putz  Kurt Stüwe  Mark Jessell  Philippe Calcagno   《Tectonophysics》2006,412(1-2):87-103

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.  相似文献   

TRANSALP—deep crustal Vibroseis and explosive seismic profiling in the Eastern Alps     

Ewald Lüschen  Daniela Borrini  Helmut Gebrande  Bernd Lammerer  Karl Millahn  Franz Neubauer  Rinaldo Nicolich  TRANSALP Working Group   《Tectonophysics》2006,414(1-4):9

The TRANSALP consortium, comprising institutions from Italy, Austria and Germany, carried out deep seismic reflection measurements in the Eastern Alps between Munich and Venice in 1998, 1999 and 2001. In order to complement each other in resolution and depth range, the Vibroseis technique was combined with simultaneous explosive source measurements. Additionally, passive cross-line recording provided three-dimensional control and alternative north–south sections. Profits were obtained by the combination of the three methods in sectors or depths where one method alone was less successful.The TRANSALP sections clearly image a thin-skinned wedge of tectonic nappes at the northern Alpine front zone, unexpected graben or half-graben structures within the European basement, and, thick-skinned back-thrusting in the southern frontal zone beneath the Dolomite Mountains. A bi-vergent structure at crustal scale is directed from the Alpine axis to the external parts. The Tauern Window obviously forms the hanging wall ramp anticline above a southward dipping, deep reaching reflection pattern interpreted as a tectonic ramp along which the Penninic units of the Tauern Window have been up-thrusted.The upper crystalline crust appears generally transparent. The lower crust in the European domain is characterized by a 6–7 km thick laminated structure. On the Adriatic side the lower crust displays a much thicker or twofold reflective pattern. The crustal root at about 55 km depth is shifted around 50 km to the south with respect to the main Alpine crest.  相似文献   

Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography   总被引：1，自引：1，他引：1  

Florian Bleibinhaus  Helmut Gebrande 《Tectonophysics》2006,414(1-4):51

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.  相似文献   

From source terrains of the Eastern Alps to the Molasse Basin: Detrital record of non-steady-state exhumation   总被引：2，自引：1，他引：2  

J. Kuhlemann  I. Dunkl  A. Brügel  C. Spiegel  W. Frisch 《Tectonophysics》2006,413(3-4):301-316

Fission-track cooling ages of detrital apatite (AFT) in the East Alpine Molasse Basin display age groups corresponding to geodynamic events in the orogen since Jurassic times. These age groups are typical of certain thermotectonic units, which formed a patchwork in the Swiss and Eastern Alps. By a combination of petrographic and thermochronologic data, progressive erosion of source terrains is monitored in different catchments since the Oligocene. The AFT cooling ages show a decrease in lag time until when rapidly cooled debris derived from tectonically exhumed core complexes became exposed. After termination of tectonic exhumation, lag times of debris derived from the core complexes increased. Neither on the scale of the entire Eastern Alps, or on the scale of individual catchments, steady-state exhumation is observed, due to the highly dynamic changes of exhumation rates since Late Eocene collision.  相似文献   

Indium Enrichment in the Meng'entaolegai Ag-Pb-Zn Deposit, Inner Mongolia, China   总被引：3，自引：0，他引：3  

Qian Zhang    Xiaoqing Zhu    Yuliang He  Junjie Jiang  Dapeng Wang 《Resource Geology》2006,56(3):337-346

Abstract. The Meng'entaolegai In-rich Ag-Pb-Zn deposit is located in the eastern part of Inner Mongolia. It is one of the In-richest deposits in China. Large amounts of quartz and sulfide minerals constitute a hydrothermal quartz-sulfide vein deposit within a Hercynian acidic granite massif, which occupies an area of about 400 km². Thirty-six orebodies, controlled strictly by the E-W trend faults, are found in the orefield of 6 km in length from east to west and 200 to 1,000 m in width from south to north. The ore minerals are mainly galena, sphalerite and pyrite, and subordinate chalcopyrite, arsenopyrite, cassiterite and stannite with many Ag-minerals. The gangue minerals are mainly quartz, calcite, sericite and chlorite. Economic components of the deposit are dominated by Pb andZn (reserves of Pb and Zn are 0.17 Mt and 0.37 Mt, and their grades are 1 % and 2.3 %, respectively), with Ag, Sn, In and Cd (1,800 t Ag, >2,000 t Sn, >500 t In and 1,800 t Cd) as by-products. Indium is highly enriched in ores and its contents are 9 to 295 ppm in ores and 85 to 2,660 ppm in sphalerite. Analytical results show that the ore-forming fluid of this deposit contains 0.8–3.5 ppm In and 4–36 ppm Sn, and the two elements show a very good positive correlation with a correlation coefficient of 0.8672, while the correlation between In and Zn in the ore-forming fluids, with a correlation coefficient of 0.5723, is not as good as that between In and Sn. This indicates that indium has an affinity with tin in the ore-forming fluids. The authors think that this is probably the main reason why those In-rich deposits spread over the world are simultaneously enriched in tin.  相似文献   

Petrogenesis of Cretaceous adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province (eastern China): Implications for geodynamics and Cu–Au mineralization     

Qiang Wang  Derek A. Wyman  Ji-Feng Xu  Zhen-Hua Zhao  Ping Jian  Xiao-Lin Xiong  Zhi-Wei Bao  Chao-Feng Li  Zheng-Hua Bai 《Lithos》2006,89(3-4):424-446

Both adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province, eastern China are associated with Cretaceous Cu–Au mineralization. The Shaxi quartz diorite porphyrites exhibit adakite-like geochemical features, such as light rare earth element (LREE) enrichment, heavy REE (HREE) depletion, high Al₂O₃, MgO, Sr, Sr / Y and La / Yb values, and low Y and Yb contents. They have low ε_Nd(t) values (− 3.46 to − 6.28) and high (⁸⁷Sr / ⁸⁶Sr)_i ratios (0.7051–0.7057). Sensitive High-Resolution Ion Microprobe (SHRIMP) zircon analyses indicate a crystallization age of 136 ± 3 Ma for the adakitic rocks. Most volcanic rocks and the majority of monzonites and syenites in the Luzong area are K-rich (or shoshonitic) and were also produced during the Cretaceous (140–125 Ma). They are enriched in LREE and large-ion lithophile elements, and depleted in Ti, and Nb and Ba and exhibit relatively lower ε_Nd(t) values ranging from − 4.65 to − 7.03 and relatively higher (⁸⁷Sr / ⁸⁶Sr)_i ratios varying between 0.7057 and 0.7062. The shoshonitic and adakitic rocks in the Luzong area have similar Pb isotopic compositions (²⁰⁶Pb / ²⁰⁴Pb = 17.90–18.83, ²⁰⁷Pb / ²⁰⁴Pb = 15.45–15.62 and ²⁰⁸Pb / ²⁰⁴Pb = 38.07–38.80). Geological data from the Luzong area suggest that the Cretaceous igneous rocks are distributed along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China and were likely formed in an extensional setting within the Yangtze Block. The Shaxi adakitic rocks were probably derived by the partial melting of delaminated lower crust at pressures equivalent to crustal thickness of > 50 km (i.e., 1.5 GPa), possibly leaving rutile-bearing eclogitic residue. The shoshonitic magmas, in contrast, originated mainly from an enriched mantle metasomatized by subducted oceanic sediments. They underwent early high-pressure (> 1.5 GPa) fractional crystallization at the boundary between thickened (> 50 km) lower crust and lithospheric mantle and late low-pressure (< 1.5 GPa) fractional crystallization in the shallow (< 50 km) crust. The adakitic and shoshonitic rocks appear to be linked to an intra-continental extensional setting where partial melting of enriched mantle and delaminated lower crust was probably controlled by lithospheric thinning and upwelling of hot asthenosphere along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China. Both the shoshonitic and adakitic magmas were fertile with respect to Cu–Au mineralization.  相似文献   

Seismotectonics of the Cyprian Arc   总被引：1，自引：0，他引：1  

Shimon Wdowinski  Zvi Ben-Avraham  Ronald Arvidsson  Goran Ekström 《Geophysical Journal International》2006,164(1):176-181

  相似文献   

Geolord-AT空三加密软件处理数码航片的方法     

熊彬  冒国华 《现代测绘》2005,28(4):32-34

在Geolord-AT空三加密软件中对数码航片进行框标定向的前期处理，创建带有框标的数码航片或者直接创建内定向的＊．kb文件，使数码航片顺利按要求通过内定向。  相似文献   

内蒙古东胜砂岩型铀矿后生成矿与油气关系   总被引：1，自引：1，他引：1  

窦继忠  张复新  贾恒 《西北地质》2005,38(4):65-71

发育于内蒙古鄂尔多斯盆地北部中侏罗统直罗组辫状河相杂砂岩体内的砂岩型铀矿，有一系列较为特殊的与放射性铀成矿有直接或间接关系的成矿地质现象：绿色化蚀变带、漂白退色化带、二次胶结钙化砂岩团块及钙化砂岩断续层与“钙化木”后生蚀变现象；在与铀矿化和与油气的关系认识上存在一定分歧。初步分析了它们的形成、成因及与铀成矿的关系及其找矿意义。  相似文献   

新疆葫芦铜镍硫化物矿床的地质特征与成矿时代   总被引：32，自引：1，他引：32  

陈世平  王登红  屈文俊  陈郑辉  高晓理 《新疆地质》2005,23(3):230-233

哈密葫芦铜镍矿是东天山地区典型的与基性-超基性岩有关的岩浆成因块状硫化物矿床.对其中含铜镍硫化物的基性-超基性岩用Re-Os等时线法定年,获得(283±13)Ma的等时线年龄.这表明,葫芦与东天山其他铜镍矿床乃至喀拉通克和箐布拉克铜镍硫化物矿床一样,主要形成于海西期,同位素年代学界定的成岩成矿时间大致在320~280 Ma,表明海西晚期在新疆北部为一个与基性-超基性岩有关的铜镍矿床成矿高峰期.  相似文献