北京房山岩体形成过程中的岩浆混合作用证据   总被引：15，自引：6，他引：15  

覃锋  徐晓霞  罗照华 《岩石学报》2006,22(12):2957-2970

北京房山侵入岩体主要由石英二长闪长岩单元和三种不同结构的花岗闪长岩单元组成,岩体中广泛分布的镁铁质微粒包体、富集暗色矿物的线状条带以及各岩相单元的非渐变接触关系等宏观特征,指示岩体的形成与岩浆混合作用有密切联系。122个斜长石成分剖面电子探针分析表明,它们众数成分为 An=29的更长石。但是,其成分变化范围极宽(An=14～56),晶体内不同部位的成分有很大差别,出现正常环带的 An 值较低(14～42),内环带的 An 值较高(24～56)的特殊情况,指示斜长石结晶环境的改变,暗示具有富钙基性岩浆的加入。从岩体边部到中心,斜长石 An 牌号逐渐降低,但相邻岩相单元之间有较大的重叠,表明不同岩石单元中的斜长石成分主要受控于岩浆成分的变化,与分离结晶作用无关。斜长石的韵律性环带、特别是内环带的发育则是岩浆混合作用机制的有力证据。基性岩浆的反复注入不仅改变寄主岩浆的成分,而且也控制了它的温度、定位机制和岩石的结构特征。因此,房山岩体的形成过程还包含了镁铁质岩浆多次注入的历史,并且从外到里基性岩浆的作用逐渐减弱。  相似文献   

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study   总被引：3，自引：0，他引：3  

Claudia A. Trepmann  Bernhard Stckhert  Dorothe Dorner  Rasoul Hamidzadeh Moghadam  Martina Küster  Klaus Rller 《Tectonophysics》2007,442(1-4):83-104

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.  相似文献   

An automatic radon probe for earth science studies     

M. Monnin  J. L. Seidel 《Journal of Applied Geophysics》1998,39(4):209-220

A field instrument designed for continuous radon measurement is described. It is based on a solid state electronic sensor that is housed in a rugged casing that also contains its associated electronics. This lightweight device is designed for selective counting of α-decays with recorded count values over specified intervals being stored within the device. Real time data processing to reject spurious values is automatically performed by the instrument. Data are downloaded by means of a handheld or a laptop computer. The energy provided by alkaline batteries ensures 2 months of continuous recording in the field. Example of radon anomalies are exhibited.  相似文献   

Time-Variations of D-Region Electron Densities, and Comparisons With Model Computations     

Suman Ganguly  John Zinn 《Studia Geophysica et Geodaetica》1998,42(4):500-510

An extensive series of incoherent scatter studies of the ionospheric D-region was carried out at the Arecibo radar facility during 1978 and 1979. They included several full-day sequences of electron density measurements over a range of altitudes, and also included a sequence during the serendipitous occurrence of a large solar flare. For the solar flare event simultaneous data on solar X-ray fluxes in several wavelength bands were available from the GOES-2 and ISEE-3 satellites. In the course of development of a large ionospheric computer model at Los Alamos we have used the solar flare data as a reality check. The solar X-ray flux data were used as inputs for computing ionization rates. The model computer includes 999 chemical reactions, and also includes diffusion and transport processes. In the course of the flare studies we used the data comparisons to adjust the values of three chemical rate coefficients that were poorly known. With those adjustments the model computations fitted the data quite well. Subsequent to the flare analysis we have been using the same model with some minor updates to compute the expected diurnal variations of the ambient D-region under conditions chosen to match those existing at the times of the incoherent scatter measurements. Comparisons of the computations and the data will be shown, and the relative importance of the several separate ionization processes will be discussed. We also compare model results with experimental data on concentrations of NO.  相似文献   

Simulating Poynting Flux Acceleration in the Laboratory with Colliding Laser Pulses     

Edison Liang 《Astrophysics and Space Science》2007,307(1-3):309-313

We review recent PIC simulation results which show that double-sided irradiation of a thin over-dense plasma slab with ultra-intense laser pulses from both sides can lead to sustained comoving Poynting flux acceleration of electrons to energies much higher than the conventional ponderomotive limit. The result is a robust power-law electron momentum spectrum similar to astrophysical sources. We discuss future ultra-intense laser experiments that may be used to simulate astrophysical particle acceleration.  相似文献   

Homogeneity testing of microanalytical reference materials by electron probe microanalysis (EPMA)     

《Chemie der Erde / Geochemistry》2014,74(3):375-384

Homogeneity testing of candidate reference materials requires distinguishing the effects of measurement uncertainty of the analytical method from true compositional variations within the material. Many in situ microanalytical techniques do not allow classical ANOVA homogeneity testing due to the infeasibility of truly replicated analyses on the same analysis volume. This also applies to the analysis of beam-sensitive and light element-bearing materials by electron probe microanalysis (EPMA). This reality has led me to reconsider the homogeneity index approach used in the testing of microanalytical reference materials by EPMA. Based on statistical considerations, I show that the homogeneity index is suitable for statistical significance testing using F and chi-squared statistics and allows estimating the contribution of compositional heterogeneity to the total uncertainty budget of the referenced values. However, there are problems of bias and masking of small compositional variations by measurement uncertainty. This contribution shows the strong impact of the total number of measurements on the resolution of a microanalytical homogeneity study and discusses how to quantify the relative contribution of heterogeneity to the total uncertainty budget. I present an example of EPMA to illustrate this approach and show some pitfalls and limitations in its application.  相似文献   

电子探针测年方法应用于晶质铀矿的成因类型探讨   总被引：7，自引：4，他引：3  

赵慧博  刘亚非  阳珊  叶美芳  王志海  王博  常娜 《岩矿测试》2014,33(1):102-109

电子探针Th-U-Pb测年因其高分辨率与高精度的优势,在独居石、锆石等定年矿物中得到了推广,但在Th、U、Pb含量高的晶质铀矿、沥青铀矿等矿物中则应用较少。本文在铁矿床变质岩绿泥石、阳起石黑云母蚀变岩首次发现U含量高的晶质铀矿,基于此,结合该铁矿床地区的地质背景,利用偏光显微镜与电子探针等分析测试手段,将镜下蚀变现象、年龄计算与其他相关元素分析相结合,重点对晶质铀矿的成矿年龄及成矿规律进行探讨。研究发现:通过镜下观察判断,晶质铀矿的成因类型与澳大利亚著名的变质型铀矿相似,均为古老的变质型,且周围的脉石矿物均为绿泥石,绿泥石皆由黑云母退变质而成,铀矿的赋存位置显示其与黑云母、绿泥石之间有紧密联系,其成矿年龄与黑云母、绿泥石形成年龄息息相关。继而根据电子探针数据计算成矿年龄,判断成矿期次,得出主要成矿期在(1654±17)Ma~(1805±17)Ma,为中元古代中期,且主要成矿期与热液蚀变作用黑云母化有关,后期活化富集时期在(657±17)Ma~(807±17)Ma,为新元古代南华纪时期,此阶段是热液侵入、绿泥石化广泛发育的时期;选取较大颗粒对晶质铀矿的环带年龄进行计算,从年龄分布上证实后期有强烈的流体活动的发生,且主要与绿泥石化相关。另外,对比变质型与沉积型铀矿中Y2O3与UO2含量发现,两者之间存在负相关关系,此关系对判断铀矿成因即是否为变质型或沉积型可能有指示意义,但缺乏大量的数据佐证,需进一步研究。  相似文献   

应用能谱扫描电镜与X射线衍射等分析技术研究西藏扎西康铅锌矿中伴生元素锰的赋存状态     

徐国栋  王冠  程江  董随亮 《岩矿测试》2014,33(6):808-812

西藏扎西康铅锌多金属矿床是我国首次发现的喷流沉积-热泉水改造型锰铁锑铅锌银矿床,已有研究表明矿床中除了铅锌矿还伴生有银、锑、铜、硫、锰、砷等多种元素。本文在化学多元素分析和光学显微镜镜下鉴定的基础上,结合能谱扫描电子显微镜和X射线衍射分析等手段对扎西康铅锌矿中伴生组分Mn的含量、矿物种类、嵌布和包裹等特性进行了研究。分析结果表明,原生矿石的主要成矿元素Pb和Zn的含量分别为6.00%和4.00%,伴生元素Mn的含量平均达到4.36%;原生矿石中的主要矿物为方铅矿、闪锌矿,其次为黄铁矿、毒砂和菱锰矿等。原生矿石中伴生元素Mn主要以独立的菱锰矿和铁菱锰矿形式存在,与闪锌矿和方铅矿密切共生,是成矿早期重要的载矿矿物,嵌布在石英、黄铁矿、闪锌矿和毒砂的粒间、边部及空隙间,其次以类质同象形式赋存于菱铁矿和菱锌矿中。进一步对扎西康铅锌矿选冶产物中的伴生元素Mn的含量和赋存状态进行研究,研究表明Mn具有较高的综合利用价值,在原生矿石、铅精矿、锌精矿和尾矿中的质量分数分别为4.36%、0.51%、0.95%和5.36%,显示Mn很少一部分进入铅精矿和锌精矿,而绝大部分进入尾矿;Mn在尾矿中仍主要以菱锰矿形式存在,存在形式与原生矿石相比未发生改变,可通过强磁选工艺从铅锌尾矿中综合回收利用Mn。  相似文献   

壳聚糖和PDMDAAC改性膨润土用于处理含油废水的研究   总被引：1，自引：0，他引：1  

邵红  刘相龙  王大卫  徐微雪 《岩矿测试》2014,33(3):426-432

含油废水污染范围广,对人类和生态环境危害大。采用常规方法(如浮选法、絮凝法、电化学法、膜分离法和生物法)处理的除油率不高于91%,成本较高,因此急需开发一种高效低廉的吸附剂。膨润土是一种优良的吸附剂,但用其直接处理含油废水的效果较低。本文选用壳聚糖和PDMDAAC两种有机物作为改性剂,对钠基膨润土改性,使膨润土能有效地处理含油废水。通过实验比较了两种有机改性膨润土处理含油废水的最佳去除条件,探讨了表征对其吸附性能的影响。去油效果结果表明:壳聚糖改性膨润土的除油率可达87.8%,PDMDAAC改性膨润土的除油率可达89.3%,处理所需时间少于15 min;除油效率和处理时间都优于常规方法。吸附性能表征结果显示,两种改性剂均以负载的方式和钠基膨润土颗粒结合,吸附性能良好;相比而言,PDMDAAC改性膨润土的处理效果比壳聚糖改性膨润土更好。PDMDAAC应用于含油废水的处理,具有成本低、效率高、操作简单的特点,在含油废水处理领域具有较好的应用前景。  相似文献   

红外光谱/扫描电镜等现代大型仪器岩石矿物鉴定技术及其应用   总被引：4，自引：3，他引：1  

杜谷  王坤阳  冉敬  王风玉  潘忠习 《岩矿测试》2014,33(5):625-633

传统的光学显微镜由于分辨率、放大倍数的限制,对于细微颗粒的定性分析不准确,矿物的定量分析存在一定的误差,对纳米-微米级矿物形貌及结构特征的观察束手无策。随着油气勘探及地质找矿的不断深入,需要提供岩石中所有矿物、孔隙及微量元素的信息,因此整合傅里叶红外光谱仪、X射线衍射仪、拉曼光谱仪、扫描电镜的优点,建立以大型仪器为基础的岩石矿物鉴定方法是当前地质工作的需要。红外光谱光谱范围为7500~370 cm-1,能对固、液、气样品中含量高于30%的矿物进行快速、准确的定性分析;主要用于有机质分析,其次还可对部分具有极性键的无机化合物及金属氧化物进行分析。X射线衍射仪能快速地对样品中含量大于15%的矿物进行较为准确的定量分析;现今主要用于各类晶质矿物的定性分析,同时也可对碳酸盐岩矿物等不含水矿物进行定量分析。拉曼光谱仪光谱范围为200~1000 nm,空间分辨率为横向0.5μm、纵向2μm,通过对包裹体进行测试能直接获得成岩过程中的温度、压力、流体成分等信息;目前主要用于流体包裹体成分的测试,其次还可对分子极化度会发生变化的液态、粉末及固体样品进行定性分析。扫描电镜分辨率达到1 nm,能清晰地观察到纳米-微米级矿物的形貌特征及矿物的结构特征;主要用于纳米-微米级的任何非磁性固体矿物的形貌及相关关系的观察。通过大型仪器建立的岩石矿物鉴定方法具有更高的分辨率,显著地提高了岩矿鉴定的精准度,大大拓宽了岩矿鉴定的范围(如鉴定纳米/微米级的矿物、矿物的不同变种等),能够全面、精准地提供岩石矿物的矿物含量和矿物组成、客观准确的成岩作用信息、清晰的矿物微观形貌及结构特征,而且仪器功能相互重叠,测试结果相互验证,保证了测试结果的可靠性。与传统光学显微镜鉴定方法相比,现代大型仪器岩石矿物鉴定技术为揭示矿物间的共生、反应、演化、岩石的成因、沉积/成岩环境等提供了依据,为地质工作提供准确、全面的矿物定性定量、组构特征及成岩作用等信息,为地质工作的顺利完成奠定了坚实的基础。  相似文献