南极冰貌卫星影像条带噪声的剔除          下载免费PDF全文

鄂栋臣  沈强 《极地研究》2004,15(1):1-10

本文在简要叙述条带噪声形成原因的基础上 ,针对南极地区的ASTER 1A的可见光影像中出现的条带噪声的现象 ,通过设计了基于切比雪夫窗、凯瑟窗的FIR滤波器和约束最小二乘FIR滤波器对其条带噪声进行剔除 ,这两种滤波器能够尽可能地剔除条带 ,同时使影像的灰度分布发生最小畸变。并通过与其他方法 (例如 :低通滤波 ,直方图匹配等 )比较 ,说明这两种滤波的方法优于其他的方法  相似文献   

Global methane emission through mud volcanoes and its past and present impact on the Earth’s climate—a comment     

Alexei V. Milkov  Giuseppe Etiope 《International Journal of Earth Sciences》2005,94(3):490-492

  相似文献   

基于WACCM+DART的临近空间SABER和MLS臭氧观测同化试验研究   总被引：1，自引：0，他引：1  

敬文琪  王业桂  崔园园  蔡其发  兰伟仁 《大气科学》2019,43(2):233-250

本研究在WACCM+DART（Whole Atmosphere Community Climate Model,Data Assimilation Research Test-Bed）临近空间资料同化预报系统中加入SABER（Sounding of the Atmosphere using Broadband Emission Radiometry）和MLS（Microwave Limb Sounder）臭氧观测同化接口,并以2016年2月一次平流层爆发性增温（SSW）过程为模拟个例进行了SABER和MLS臭氧观测同化试验,得出以下结论:同化SABER和MLS臭氧体积浓度观测得出的WACCM+DART臭氧分析场能够较真实反映SSW期间北极上空平流层臭氧廓线随时间的演变特征,且与ERA5（Fifth Generation of ECMWF Reanalyses）再分析资料描述的臭氧变化特征具有很好的一致性;基于SABER和MLS臭氧观测的WACCM臭氧6 h预报检验表明同化臭氧观测对臭氧分析和预报误差的改善效果主要体现在南半球高纬平流层和北半球中高纬平流层中上层-中间层底部;基于ERA5再分析资料的WACCM+DART分析场检验表明同化SABER和MLS臭氧体积浓度资料可在提高北半球高纬地区上平流层-中间层底部臭氧场分析质量的同时减小该地区上平流层-中间层底部温度场和中间层底部纬向风场的分析误差;基于MLS臭氧资料的臭氧中期预报检验表明相对控制试验同化SABER和MLS臭氧体积浓度资料能更好改善0~5 d下平流层和中间层底部臭氧的预报效果。  相似文献   

湿地甲烷排放研究简述   总被引：4，自引：2，他引：4  

马学慧  李君泉 《地理科学》1995,15(2):163-169

  相似文献   

Emission spectrographic estimation of gold     

K. C. Joseph 《Journal of Earth System Science》1985,94(3):279-282

A procedure for estimating minute quantities (parts per billion) of gold is described, based on dissolution of the sample in aqua regia, adsorption on activated charcoal, arcing of the charcoal ash, and measurement of the intensity of the emitted spectra.  相似文献   

Determination of nitrophenols,diaminotoluenes, and chloroaromatics in ammunition wastewater     

P. Mußmann  R. Eisert  K. Levsen  G. Wünsch 《洁净——土壤、空气、水》1995,23(1):13-19

Methods for the determination of three compound classes, i. e. diaminotoluenes, nitrophenols, and chloroaromatics in groundwater of a former ammunition plant are reported. Diaminotoluenes were extracted by discontinuous liquid/liquid-, nitrophenols by continuous liquid/liquid-extraction using dichloromethane, and chloroaromatics by solid-phase extraction. These compound classes may be analyzed by gas chromatography (GC) or gas chromatography coupled to mass spectrometry (GC/MS) without derivatization or after derivatization with N-methyl-bis(trifluoroacetamide) (MBTFA) or heptafluorobutyric anhydride (HFBA) in the case of diaminotoluenes and HFBA or acetic anhydride in the case of nitrophenols. An atomic emission detector (AED) coupled to a gas chromatograph may be employed for the analysis of chloroaromatics. High selectivity can be achieved using the characteristic wavelengths of chlorine. A variety of these compounds were identified and quantified in a groundwater sample from the former ammunition plant Elsnig (Saxony, Germany). Concentrations were in the lower ppb range. Thus, dichlorobenzenes which may have been used as substituents at the end of World War II could be identified in groundwater samples at this site.  相似文献   

The establishment of the atmospheric emission inventories of the ESCOMPTE program   总被引：3，自引：0，他引：3  

S. Franois  E. Grondin  S. Fayet  J.-L. Ponche 《Atmospheric Research》2005,74(1-4):5-35

Within the frame of the ESCOMPTE program, a spatial emission inventory and an emission database aimed at tropospheric photochemistry intercomparison modeling has been developed under the scientific supervision of the LPCA with the help of the regional coordination of Air Quality network AIRMARAIX. This inventory has been established for all categories of sources (stationary, mobile and biogenic sources) over a domain of 19,600 km² centered on the cities of Marseilles–Aix-en-Provence in the southeastern part of France with a spatial resolution of 1 km². A yearly inventory for 1999 has been established, and hourly emission inventories for 23 days of June and July 2000 and 2001, corresponding to the intensive measurement periods, have been produced. The 104 chemical species in the inventory have been selected to be relevant with respect to photochemistry modeling according to available data. The entire list of species in the inventory numbers 216 which will allow other future applications of this database. This database is presently the most detailed and complete regional emission database in France. In addition, the database structure and the emission calculation modules have been designed to ensure a better sustainability and upgradeability, being provided with appropriate maintenance software. The general organization and method is summarized and the results obtained for both yearly and hourly emissions are detailed and discussed. Some comparisons have been performed with the existing results in this region to ensure the congruency of the results. This leads to confirm the relevance and the consistency of the ESCOMPTE emission inventory.  相似文献   

743离子交换快速分离—等离子体光谱法同时测定十五个稀土元素   总被引：1，自引：0，他引：1  

吴锡凤  蒋铁珊 《铀矿地质》1993,(5)

本文研制了适用于地质样品中15个稀土元素分析的快速方法。样品经碱熔沉淀分离和743阳离子交换树脂分离富集将稀土元素制备成溶液用等离子体光谱法(ICP-AES)进行测量。方法检出限为0.002-0.3μg/g,当稀土元素含量为0.5-80,μg/g时,方法相对标准偏差为15％-2％。本方法经过多年的样品分析考验以及不断的改进和完善,证明方法简便快速,分析数据稳定可靠,能很好地满足地质样品中15个稀土分量测定的要求。  相似文献   

便携式PET数据无线传输的可行性探讨   总被引：1，自引：0，他引：1  

朱俊  张博  张智  谢庆国 《CT理论与应用研究》2007,16(3):50-59

提出一种新的便携式PET中数据高速传输的方法,并验证其可行性.便携式PET在进行检测时,由于探测器的移动导致了有线数据传输的困难.有别于以往采用的旋转光纤接头的方法,提出在狭小区域内应用高速无线传输技术来解决数据的连续传输问题,主要评测了无经传真(802.11g)的实际性能,采用多信道同时传输时,在信道独立条件下获得的总传输速率等于各信道速率之和,以此得到更高的传输速率来满足便携式PET大数据量的连续高速传输,在方便被检测体的自由活动方面显示了潜在的应用前景.  相似文献   

直流电弧原子发射光谱法测定钛和钛合金中微量杂质元素     

王辉  马晓敏  郑伟  王宽 《岩矿测试》2014,33(4):506-511

高纯度的钛及钛合金具有良好的可塑性,当有杂质存在时变得脆而硬而影响其性能,准确分析杂质元素的含量有利于对钛生产工艺进行质量控制。对于杂质元素的分析,现行国家标准方法是采用样品蒸发温度较高的直流电弧作为光源,摄谱仪测定,需要经过显影、定影、测量黑度等步骤,操作繁琐,流程长,测量误差较大。本文应用中阶梯光栅和电荷耦合器件(CCD)组成的直流电弧(DC Arc)原子发射光谱仪(波长范围200~800nm),谱线干扰分析和谱线强度测量可以同时进行,能更大限度地获取光谱信息,建立了快速测定钛及钛合金中10种微量杂质元素(锰锡铬镍铝钼钒铜锆钇)的分析方法。实验讨论了测定过程中的四类谱线干扰,包括钛作为基体元素的谱线干扰、钛合金中添加的化学成分元素干扰、铁谱线的干扰、杂质元素之间的干扰,确定了适当的分析线;并应用一种浅孔薄壁细颈杯形电极装入试样,提高了样品的蒸发效果;用氯化银和碳粉的混合物作缓冲剂,提高了待测元素的谱线强度。本方法的检测范围为0.001%~0.06%,精密度小于15%,回收率为90.0%~110.0%,适合于大批量钛及钛合金样品中杂质元素的同时检测。  相似文献