Deformation and mineralisation in the Scotty Creek Basin,Agnew district,Eastern Goldfields,Western Australia: evidence for D1- and D3-related gold mineralisation     

S. Jones  A. Waters  P. M. Ashley 《Australian Journal of Earth Sciences》2019,66(3):379-410

Gold deposits in the Agnew district display markedly different structural styles. The Waroonga and Songvang deposits are hosted in layer-parallel extensional shears formed under highly ductile conditions. In contrast, the New Holland–Genesis deposits are shallow-dipping quartz-filled brittle fractures and breccia zones that cut across the tightly folded bedding and formed during east–west compression. It is difficult to attribute their formation to a single compressive event. The Waroonga and Songvang deposits formed during D₁ extension, uplift and exhumation of the Agnew granitic complex and formation of the Scotty Creek Basin at ca 2670–2660?Ma. The New Holland–Genesis deposits formed during east–west D₃ compression at about ca 2650–2630?Ma. An S₁ foliation wraps around the Agnew granitic complex and L₁ stretching lineations form a radial pattern around the granite, consistent with formation during D₁ uplift of the composite granite body. Uplift and erosion of granite bodies in the surrounding area provide a source for the granite clasts in the upper parts of the Scotty Creek Basin. As clasts in the basin are undeformed, no significant deformation occurred prior to the uplift and erosion of the source granites in this area. Syn-tectonic emplacement of the Lawlers Tonalite during formation of the Scotty Creek Basin at ca 2665?Ma may have provided a good heat/fluid source for the mineralising systems during the first gold event. The distribution of the large deposits along the western edge of the Agnew granitic complex indicates that the extensional shear along the granite contact is a first-order control on gold deposition by providing a conduit for rising hydrothermal fluids. The northerly trend of high-grade shoots in the Waroonga deposit coincides with early north-trending growth faults, which are also likely fluid conduits.  相似文献   

冻融循环对原状过湿土固结变形特性的影响   总被引：1，自引：1，他引：0  

程培峰  王佳康 《冰川冻土》2019,41(4):858-864

为了研究季冻区过湿土的固结变形特性,对黑大公路青冈段路基原状过湿土进行固结试验和渗透试验,研究了冻融循环作用下原状过湿土的固结变形特性。试验结果表明：原状过湿土的含水率越高,土体的压缩性越高;初始孔隙比越大,渗透性越高。冻融循环后,过湿土产生不规则裂缝,土的结构也发生改变,土的压缩系数有所增大,随着冻融循环次数的增加,压缩性先增大后趋于平缓。冻融后过湿土的竖向渗透系数明显增大,且随着冻融循环次数的增加渗透性呈现先增大后趋于平缓的规律,而横向渗透系数冻融前后无明显差异。  相似文献   

河南省嵩山区元古代嵩山群底部的主滑脱带          下载免费PDF全文

索书田  游振东  闻立峰  韩郁菁 《地球科学》2019,44(5):1537-1543

河南省嵩山区位于中朝地台南部,区内发育被2个角度不整合面分隔开的3个前寒武纪岩群,一个主滑脱带沿着嵩山群与登封群间不整合面发育.滑脱带之上的早元古代嵩山群形成近南北向的褶皱带,因此,嵩山群岩石在主滑脱带之上形成无根的独立构造.与滑脱带下伏的太古宙登封群很少有关系.主滑脱带厚4～30m,沿着主滑脱带,登封群角闪岩相岩石强烈退变质到绿片岩相矿物组合,主滑脱带发育在脆韧性过渡域.多尺度的观察指出,主滑脱带的形成受地壳成分分层导致的流变学分层性所制约,而且地层柱底部软弱面或地质界面是近水平的滑脱带发育的优选位置.显然,对滑脱带的发育还必须考虑水解弱化作用.  相似文献   

循环脱吸湿与加卸载耦合作用下土体持水性能试验研究     

陈勇  苏剑  谈云志  CHAN Dave 《岩土力学》2019,(8):2907-2913

土体所经历的干湿循环和应力历史,对其孔隙结构和持水性能影响明显。为进一步深入研究二者耦合作用的影响,开展了先竖向固结再循环脱吸湿以及先气压脱湿再反复竖向加卸载两种不同加载路径的水分变化测量试验,探索土样持水性能和变形能力的演化规律。研究结果表明:(1)脱湿与吸湿路径对比,土体的持水能力具有明显的差异性,且土体越密实,这种差异性越强烈;(2)随着脱吸湿循环次数的增加,土样的进气值略有增大,减湿段和吸湿段的斜率都会减小,但影响趋势随循环次数增多而减弱;(3)对于气压减湿后的非饱和土样,其前期固结压力随气压值增加而增大,而加卸载形成的滞回圈的面积却随之减小,土体的持水性能和变形能力也降低;(4)重塑土样从不同加载路径首次达到同一应力状态时,先固结再脱湿路径下土样的体积收缩更多,而先施加气压再加载路径下土样持水性能减弱的更多。  相似文献   

压重顶进框构下穿高铁引起桥墩变形及控制技术     

李悄  孟繁增  牛远志 《岩土力学》2019,40(9):3618-3624

以某高速公路下穿京沪高铁工程为例,提出一种基于"卸载-加载平衡"理念的压重顶进框构方案,并对高铁桥墩变形及控制技术进行研究。结果表明,高速公路在高铁桥下开挖10 m深,开挖体量近10万方。采用压重顶进框构方案,施工中边顶进、边监测、边通过框顶堆土、桥下堆土、框内留土等措施加载压重,可有效控制高铁的隆起变形。在通车运营3个月后,高铁相邻桥墩累计最大差异沉降为2.7mm,距离规范限值留有46%的余量,满足规范要求。轨检表明,无砟轨道平顺性满足运营要求。对比分析表明,数值模型中粉质黏土压缩模量可采用P0~P0+100 kPa(P0为土体自重应力)应力区间对应的模量值,卸载模量可取为压缩模量的3~5倍。  相似文献   

引红济石引水隧洞围岩力学特性研究     

雷江  陈卫忠  李翻翻  于洪丹  马永尚  谢华东  王富刚 《岩土力学》2019,40(9):3435-3446

引红(红岩河)济石(石头河)引水隧洞围岩断层带破碎松软,岩石强度低,自稳能力差,易产生大变形。以上不良地质条件使其隧洞施工过程中经常会遇到TBM卡机等一系列特殊问题。针对引红济石引水隧洞施工中存在的软岩隧洞大变形问题,首先开展了X射线衍射、崩解试验,分析了试样的组成成分、黏土矿物含量对崩解性影响;再通过一系列单轴压缩试验、三轴压缩试验和蠕变试验研究了该类岩石不同应力条件下的变形破坏特征及蠕变特性。试验结果表明,该类岩石含有大量的黏土矿物(33.49%),对水比较敏感,遇水膨胀易崩解,导致岩体软化;试样具有较大塑性压缩变形,其应力-应变曲线为应变强化型,且没有明显的峰值。基于试验研究成果和现场监测数据,对该软岩隧洞大变形机制进行了分析,并提出了在围岩与管片之间安装聚氨酯缓冲层的新型支护方案,通过数值计算对支护方案的合理性进行了验证。分析结果表明:聚氨酯缓冲层可以很好地吸收围岩形变压力,避免应力集中带来的管片错台,从而大大减小管片上破坏区的产生。研究成果对该类岩体中隧洞的设计施工以及长期稳定性分析具有重要的参考作用。  相似文献   

北大别造山后伸展期中-下地壳流动形式数值模拟研究     

林少泽  向必伟  赵田  谢成龙 《地质学报》2019,93(4):791-803

造山后伸展过程中,深部地壳的变形形式反映深部岩石圈的构造活动方式,是造山后伸展深部动力学研究的主要内容。本次工作以大别造山带造山后伸展变形构造为研究对象,在详细的构造观察和组构分析基础上,以实际变形组构为约束开展数值模拟,系统地研究伸展变形构造在垂向剖面上岩石变形机制的空间分布,进而揭示大别造山带造山后伸展过程中深部地壳的变形形式。野外观察表明,北大别穹隆边缘区域拉伸线理优选方位显著,而到穹隆中部拉伸线理定向性减弱,再到穹隆核部线理定向性有所增强。运动学上,北大别穹隆内呈现了一致的上盘向NW的剪切指向。以此为约束的数值模拟研究表明,大别造山带造山后伸展期中-下地壳流动方式总体上是介于透入性简单剪切形式与纯剪切形式之间的组合形式;垂直剖面上呈现为由上、下边界向中心简单剪切分量显著降低,中-下地壳流变带中部以纯剪切变形为主。我们用造山带加厚地壳的韧性垮塌和深俯冲的太平洋板块"后撤"来解释其动力学来源。  相似文献   

石英显微变形机制及流变学特征研究进展   总被引：1，自引：0，他引：1  

孙丽静  赵中宝  王根厚  巴合达尔·巴勒塔别克  韩宁  赵鹏彬  李岩  李薇 《地质学报》2019,93(10):2698-2714

石英是组成地壳的主要矿物之一,其物理性质与地壳的变形行为及流变学属性密切相关,因此石英的显微变形机制及流变学特征研究意义重大。随着石英显微变形机制及流变学属性实验学研究的深入,我们对石英在地壳变形过程中重要作用的认识也随之提升。本文从石英结构入手,对升温过程中石英主滑移系的转换进行了总结,并且升温过程中显微变形机制也发生了改变,对流变学内涵也不同,所以分述了石英的主要变形机制,及其流变学参数;由于应变局部化为地壳变形的研究热点,并且石英对应变局部化具有一定的指示意义,所以本文对石英在应变局部化过程中的表现进行了深入讨论。考虑到地壳变形的研究过程中,石英不常作为单矿物发生变形,所以本文对多相矿物的变形表现也进行了讨论。最后我们将简单介绍一些现今主流的石英显微变形机制的研究手段。  相似文献   

Preliminary Study of the Ability of Large-scale Deformation Observed by Lunar Based InSAR—Taking Vertical Displacement of Solid Earth Tide as an Example     

Chenglong Ma  Xiaodong Chen  Liming Jiang  Heping Sun  Jianqiao Xu  Jinglong Dong  Dewei Li 《地球科学进展》2019,34(2):164-174

Based on the principle of InSAR (Interferometirc Synthetic Aperture Radar) characterized by large-scale, continuity, permanency and dynamic, we took vertical displacement of solid Earth tide as an example to simulate the large-scale deformation observed by lunar based InSAR for the first time in the study and the observation ability was analyzed. Solid Earth tide has a feature of a large-space distribution range and the lunar based InSAR exhibits a feature of an ultra-wide swath imaging. According to these features, a simplified observation geometry model was established and a mid-low latitudes area with 50 degrees span in both longitude and latitude was selected as the simulation area. Then the revisit time intervals of the lunar based SAR for the selected area and the tidal vertical displacements at the points scanned by the radar were calculated. The time differentials were further computed to get the relative vertical deformation of the solid Earth tide. The simulation results show that the revisit period of the lunar based radar is about 24.8 hours and the maximum vertical displacement in 30 days is up to 30 cm. Since the designed accuracy of the lunar based InSAR reaches several centimeters, the observing of the vertical displacement of the solid Earth tide by using the lunar based InSAR is feasible in theory as the maximum magnitude of the vertical displacement is 1 order of magnitude larger than the designed accuracy. Theoretically ,solid Earth tide is observable by using lunar based InSAR in a sizable area.We can also use the observation data to study the temporal and spatial variation characteristics when observation time lasts two revisit periods or more. On the other hand,the result of the study also provides references for the parameter designing of other observations using the lunar based InSAR, especially for observing large-scale geodynamic phenomena.  相似文献   

Study on Multi-Parameter Seismic Observation Technique Based on Optic Fiber Sensing     

Wenzhu Huang  Wentao Zhang  Fang Li 《地球科学进展》2019,34(4):424-432

”Deep well, wide band, multi-component comprehensive observation” is the development direction of seismic observation. In order to promote the application and development of underground integrated observation system, key technologies, such as high temperature resistance sensor, interference isolation of sensor unit and miniaturization of instrument, need to be developed. Optic fiber sensors have the advantages of small size, passive nature, resistance to electromagnetic interference, being easy to long distance transmission and multi-parametric network observation, which are expected to provide new technology for the comprehensive observation of multi-parameter earthquakes in deep wells. This paper proposed a comprehensive observation technique of seismic wave, crustal deformation and temperature. An integrated borehole seismic sensor based on fiber Bragg grating resonators was designed for measuring three-component earthquake, three-component crustal deformation and temperature signal. A new technique for simultaneous measurement of multi-parameters of temperature and strain of fiber based on effective cavity length was presented. The technique of high precision optical fiber signal demodulation based on single side band sweep laser and the design of multi-parameter integrated optical fiber probe were introduced. The resolution of strain and temperature measurement of the fiber multi-parameter sensor system reached 4.7 \times 10^-10 and 6×10^-5 ℃ , respectively. A comprehensive multi-parameter earthquake observation experiment was carried out at the seismic station. The results show that the integrated optical fiber multi-parameter seismic observation system can simultaneously record the earth tide signal, seismic wave signal and environmental temperature disturbance, and has good anti-environmental interference ability and long-term stability, which is expected to provide a new technique for crustal deformation observation.  相似文献