Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran     

Mohammad-Reza Gheitanchi  Zoya Zarifii 《地震学报(英文版)》2004,17(5):518-525

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…  相似文献   

3-D finite element modeling for evolution of stress field and interaction among strong earthquakes in Sichuan-Yunnan region     

陈化然  陈连旺  马宏生  李轶群  张杰卿  何巧云  王建国 《地震学报(英文版)》2004,17(6)

Introduction Sichuan-Yunnan region is a major area with frequent strong earthquakes in Chinese mainland, especially the middle-southern segment of South-North Seismic Zone, where many strong earth-quakes occurred in history. In the past 30 years, Sichuan-Yunnan region has two seismically active periods: one is from Tonghai earthquake in 1970 to Longling-Songpan earthquake in 1976, the other is from Lancang earthquake in 1988 to now. During this two periods, the M=7.7 Tonghai, M=7.1 Dagua…  相似文献   

Dynamic performance of twin curved cable‐stayed bridges     

C. Gentile  F. Martinez y Cabrera 《地震工程与结构动力学》2004,33(1):15-34

The dynamic behaviour of two curved cable‐stayed bridges, recently constructed in northern Italy, has been investigated by full‐scale testing and theoretical models. Two different excitation techniques were employed in the dynamic tests: traffic‐induced ambient vibrations and free vibrations. Since the modal behaviour identified from the two types of test are very well correlated and a greater number of normal modes was detected during ambient vibration tests, the validity of the ambient vibration survey is assessed in view of future monitoring. For both bridges, 11 vibration modes were identified in the frequency range of 0ndash;10Hz, being a one‐to‐one correspondence between the observed modes of the two bridges. Successively, the information obtained from the field tests was used to validate and improve 3D finite elements so that the dynamic performance of the two systems were assessed and compared based on both the experimental results and the updated theoretical models. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Approximate modal decomposition of inelastic dynamic responses of wall buildings     

C. Sangarayakul  P. Warnitchai 《地震工程与结构动力学》2004,33(9):999-1022

Two approximate methods for decomposing complicated inelastic dynamic responses of wall buildings into simple modal responses are presented. Both methods are based on the equivalent linear concept, where a non‐linear structure is represented by a set of equivalent linear models. One linear model is used for representing only one vibration mode of the non‐linear structure, and its equivalent linear parameters are identified from the inelastic response time histories by using a numerical optimizer. Several theoretical relations essential for the modal decomposition are derived under the framework of complex modal analysis. Various numerical examinations have been carried out to check the validity of the proposed modal decomposition methods, and the results are quite satisfactory in all cases. Fluctuating bending moment and shear at any location along the wall height contributed by each individual vibration mode can be obtained. Modal contributions to shear and flexural strength demands, as well as the corresponding modal properties, under various seismic loading conditions can also be identified and examined in detail. Furthermore, the effects of higher vibration modes on seismic demands of wall buildings are investigated by using the modal decomposition methods. Several new insights into the complicated inelastic dynamics of multi‐story wall buildings are presented. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

山西省主要河流流域面雨量预报业务流程   总被引：3，自引：1，他引：3  

苗爱梅  郭玉玺  武捷  贾利冬  骆丽楠  刘秀春 《气象》2004,30(9):24-27

以T213、HLAFS模式、MM5中尺度模式输出的格点资料以及日本降水量格点资料为基础，将影响山西降水的天气动力模型归纳为诊断模型，从中引出多个能够全面反映降水模型特征的综合物理因子；根据各种数值模式输出的降水量预报性能和质量优劣特点，依据数值模式的形势场预报优于要素场预报的现实，构造在不同环流形势背景下，启动不同预报方程的面雨量预报业务流程，有效地遏止了在环流形势调整时预报输出不能快速响应的弱点，提高了点和面雨量预报的准确度。  相似文献   

国家气象中心新一代业务中期预报模式T213L31的主要特点   总被引：12，自引：3，他引：12  

陈起英  姚明明  王雨 《气象》2004,30(10):16-21

T2 1 3中期数值预报系统于 2 0 0 2年 9月 1日起在国家气象中心正式业务化。作为此系统核心的T2 1 3L31全球模式与原业务模式T1 0 6L1 9相比 ,采用了一些新的数值技术 ,包括半拉格朗日时间积分方案的引入 ,采用规约格点 ,分布内存与共享内存并行相结合 ,从而在目前有限的计算机资源条件下 ,能积分高分辨率的模式。更重要的是 ,模式采用了一些更新、具有更真实物理概念的物理过程参数化方案 ,对于辐射方案、次网格尺度地形参数化、积云对流方案、云方案、陆面过程方案都作了很大改进 ,从而克服了许多T1 0 6L1 9模式中存在的问题 ,明显提高了T2 1 3L31模式的预报技巧。  相似文献   

几种空气质量预报方法的预报效果对比分析   总被引：9，自引：0，他引：9  

朱玉强 《气象》2004,30(10):30-32

目前应用于我国各个城市空气质量预报业务的预报方法主要有三种 :数值模式预报、统计预报和综合经验预报。这几种预报方法都有其各自的优势 ,同时也存在一些不足。应用以上方法对天津市市区进行空气质量业务预报 ,通过实测资料与预报结果进行对比分析 ,给出这几种方法在天津市区空气质量预报中的预报效果客观评价。  相似文献   

遥感影像三维可视化研究   总被引：1，自引：0，他引：1  

张顺谦 《气象科技》2004,32(4):233-236

利用DEM高程资料实现遥感影像的三维显示可大大提高遥感监测产品的使用价值，而商用软件成本高操作繁琐普及困难。利用计算机图形学知识和Delphi编程语言，开发了一套遥感影像三维可视化软件。对在开发过程中遇到的有关DEM数据的裁剪与拼接、图像配准、地表模拟、透视变换、消隐处理、光照和阴影效果以及颜色变换等问题的解决方案和实现方法作了简要的介绍。  相似文献   

青海对流云数值模拟分析   总被引：3，自引：0，他引：3  

房文 《气象科技》2004,32(5):343-347

利用中国气象科学研究院三维对流云模式和2002年青海省河南县秋季外场试验取得的资料，进行了数值模拟试验。该地区秋季对流云降水主要为冷云降水，暖雨过程不易启动。降雨主要是由于霰落入暖层融化，雨水的蒸发是雨水减少的主要机制。霰在降水的产生中发挥了重要作用。霰的生成又与冰晶密切相关。冰晶是霰的主要来源，而且也是霰生长的主要因素。初始的霰粒主要由冰霰自动转化生成，而较少由雨滴冻结生成。霰胚通过收集过冷云水和冰晶与霰的碰并又促进了霰的进一步生长。冰晶的生成主要是由于自然冰核的核化，因此，自然冰核的数浓度对整个降水过程都有影响。霰是云中过冷水消耗的主要因素。  相似文献   

CAPPS1和CAPPS2数值预报模式对比分析   总被引：6，自引：0，他引：6  

李雄 《气象科技》2004,32(6):414-416424

对CAPPS1模式和CAPPS2模式预报广西污染物进行了对比分析。主要对比了其污染扩散原理、气象预报模式、操作系统、运行时间、预报时效及预报效果。分析表明：CAPPS1和CAPPS2模式对各种污染物预报的相关系数均在0．44以上，两种模式预报广西空气污染都是可行的；两种模式均对SO2的预报效果最好，NO2次之，PM10相对最差；CAPPS2模式对各种污染物的预报值与实测值相关系数均比CAPPS1高，其中NO2的相关系数提高幅度最大；CAPPS2模式对NO2和PM10的预报准确率比CAPPS1偏高，而对SO2的预报准确率比CAPPS1偏低；CAPPS2预报首要污染物正确率比CAPPS1高出11个百分点，而预报首要污染物等级正确率则高出9个百分点。  相似文献