邢台矿区山字型构造的发现及其地质意义   总被引：1，自引：0，他引：1  

张纪勋  范志平 《中国煤田地质》2006,18(4):18-21

邢台山字型构造位于河北省邯邢煤田内，其前弧向ES突出，脊柱呈ES-WN走向。分别分析了山字型构造脊柱及其东、西翼反射弧构造形迹特征，对研究区找矿具有重要意义。  相似文献   

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation   总被引：1，自引：0，他引：1  

Saeid Khazaei  Hideki Shimada  Takashi Kawai  Junichi Yotsumoto  Kikuo Matsui 《Geotechnical and Geological Engineering》2006,24(3):735-755

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.  相似文献   

Early Proterozoic syn-and postcollision granites in the northern part of the Baikal fold area     

A. M. Larin  E. B. Sal’nikova  A. B. Kotov  L. B. Makar’ev  S. Z. Yakovleva  V. P. Kovach 《Stratigraphy and Geological Correlation》2006,14(5):463-474

Early Proterozoic granitoids are of a limited occurrence in the Baikal fold area being confined here exclusively to an arcuate belt delineating the outer contour of Baikalides, where rocks of the Early Precambrian basement are exposed. Geochronological and geochemical study of the Kevakta granite massif and Nichatka complex showed that their origin was related with different stages of geological evolution of the Baikal fold area that progressed in diverse geodynamic environments. The Nichatka complex of syncollision granites was emplaced 1908 ± 5 Ma ago, when the Aldan-Olekma microplate collided with the Nechera terrane. Granites of the Kevakta massif (1846 ± 8 Ma) belong to the South Siberian postcollision magmatic belt that developed since ～1.9 Ga during successive accretion of microplates, continental blocks and island arcs to the Siberian craton. In age and other characteristics, these granites sharply differ from granitoids of the Chuya complex they have been formerly attributed to. Accordingly, it is suggested to divide the former association of granitoids into the Chuya complex proper of diorite-granodiorite association ～2.02 Ga old (Neymark et al., 1998) with geochemical characteristics of island-arc granitoids and the Chuya-Kodar complex of postcollision S-type granitoids 1.85 Ga old. The Early Proterozoic evolution of the Baikal fold area and junction zone with Aldan shield lasted about 170 m.y. that is comparable with development periods of analogous structures in other regions of the world.  相似文献   

苏鲁造山带超高压变质作用及其P-T-t轨迹   总被引：23，自引：25，他引：23  

张泽明张金凤  游振东沈昆 《岩石学报》2005,21(2):257-270

基于超高压变质岩的岩石学,特别是超高压矿物生长成分环带、扩散环带和蚀变作用研究,综合前人的岩石学和年代学研究成果,提出苏鲁造山带超高压变质作用峰期发生在1000-1100℃和6-7GPa条件下,俯冲深度相当于200km,形成年代为240-250Ma。在此基础上,重塑了一个包括八期变质作用的P-T-t轨迹,揭示出超高压变质岩经历了三个不同的折返阶段,即从200km到100km深度的快速折返阶段,抬升速率为5km/Ma,冷却速率为10℃/Ma;从100km到30km的快速折返,抬升速率为4km/Ma,或为近等温降压,或为缓慢降温的快速降压过程;从下地壳到近地表的缓慢折返阶段,抬升速率为1km/Ma,但为快速降温过程,冷却速率可达20℃/Ma。  相似文献   

中国大陆科学钻探工程主孔100～2000 m 放射性产热元素的垂向分布特征及其成因   总被引：2，自引：0，他引：2       下载免费PDF全文

曾令森刘福来  张泽明杨经绥 许志琴 《中国地质》2005,32(2):230-238

地球内部放射性产热元素U、Th及K(HPE)含量如何随深度的变化而变化是固体地球科学中的一个重要参数,在限定地壳的热和流变学结构、地球化学、岩石和构造模型中起关键性的作用。对HPE深部分布的认识主要来自于对大型花岗岩岩基的研究及对地表热流值和产热率之间关系的模拟,对高压-超高压变质地体的HPE随深度的分布缺乏认识。在苏鲁超高压变质带中实施的中国大陆科学钻探工程届时将提供超过5km的岩心,为确定苏鲁超高压带的HPE结构提供了最好的机会。对CCSD的100～2000m岩心的732块样品详细的放射性产热元素含量的测试及现今产热率计算的初步结果表明:(1)花岗质片麻岩具有最高的产热率,平均为1665×10-11W/kg;(2)副片麻岩(变沉积岩)具有中等的产热率,为994×10-11W/kg;(3)金红石榴辉岩及石榴石橄榄岩具有最低的产热率,为17×10-11～20×10-11W/kg;(4)放射性产热元素的浓度及相应的产热率随岩性的变化而变化,呈现阶梯状的分布特征。产热率随深度的变化特征表明CCSD主孔中的HPE三明治结构。该结构可能代表着高压-超高压变质地体中的典型HPE结构,比大型花岗岩岩基的HPE结构更复杂,与传统的HPE指数衰减分布模式不吻合。CCSD主孔中所揭示的三明治式HPE结构是大陆被动陆缘中的基性及超基性岩、沉积岩及花岗岩在深  相似文献   

西藏冈底斯带门巴地区印支期花岗岩地球化学特征及其构造意义   总被引：14，自引：7，他引：14  

和钟铧  杨德明  郑常青  黄映聪 《地质通报》2005,24(4):354-359

门巴地区晚三叠世花岗岩主要出露在西藏冈底斯构造带的弧背断隆上,主要岩石类型为黑云角闪花岗闪长岩和黑云二长花岗岩。岩石为钙碱性,具有富SiO2、K2O的特点。K2O/Na2O平均为1.13,相对富钾。Al2O3变化于13.27%～15.53%之间,A/CNK平均为1.0,为准铝质岩石。花岗岩体稀土元素总量∑REE变化于99.5×10-6～294.72×10-6之间,轻稀土元素富集,重稀土元素亏损,具弱至中等的负Eu异常。微量元素以富K、Rb、Ba、Th等大离子亲石元素和亏损Nb、Ta、Y、Yb等高场强元素为特征。岩石学和岩石地球化学研究表明,该时代的花岗岩具I型花岗岩的特点,形成于岛弧环境,是新特提斯洋早期俯冲作用的产物。同时它也暗示着冈底斯岩浆弧带在晚三叠世就已成雏形。  相似文献   

河南焦作云台山早前寒武纪变质基底锆石SHRIMP U-Pb年龄   总被引：4，自引：0，他引：4  

高林志  赵汀  万渝生  赵逊  马寅生  杨守政 《地质通报》2005,24(12):1089-1093

应用离子探针技术,对华北太行山南缘钾长石化长英质副片麻岩和钾长石化片麻状奥长花岗岩进行了锆石年龄测定。钾长石化长英质副片麻岩的变质原岩为泥砂质碎屑沉积岩,其形成时代很可能为新太古代。碎屑锆石普遍存在强烈铅丢失,靠近上交点的5个数据点207Pb/206Pb加权平均年龄为3399Ma±8Ma,代表了物源区组成的时代。钾长石化片麻状奥长花岗岩2组锆石207Pb/206Pb加权平均年龄分别为2511Ma±13Ma(岩体形成时代)和2735Ma±16Ma(残余锆石年龄),分别代表该岩体形成时代和残余锆石年龄。新的资料支持了华北克拉通中部造山带太古宙地质体与其东部陆块存在亲缘关系的认识。  相似文献   

大别造山带地壳泊松比结构与超高压变质带—来自宽角反射与近垂直反射剖面的启示   总被引：3，自引：0，他引：3  

李英康  董树文等 《地质论评》2002,48(1):15-23

综合宽角反射、近垂直反射的探测结果和有关地质资料，对大别造山带地壳结构和超高压变质带研究显示：大别造山带地壳具有层块结构特征。沿安义－庄墓剖面，上地壳有7个弹性块体，中地壳有5个，下地壳有4个。扬子与华北地块的主缝合带是超高压变质带，扬子地块与大别造山带的现今分界线是与郯庐断裂相交的太湖－马庙断裂，磨子潭－晓天断裂是大别造山带的北界，北淮阳构造带呈楔状向下插入，它与华北地块的分界是肥中断裂。郯庐断裂在中、上地壳近于直立，下地壳向西倾斜。超高压变质带的厚度为5－7km，产状向北插入到北大别块体之下，折返过程是构造就位，不是大别山的均匀抬升，折返的主运动面是水吼－五河高温剪切带。  相似文献   

班公湖—怒江构造带西段三叠纪—侏罗纪构造—沉积演化   总被引：20，自引：2，他引：20  

王冠民  钟建华 《地质论评》2002,48(3):297-303

班公湖－怒江构造带西段在大地构造位置上处于特提斯构造域东端，横跨班公湖－怒江断裂带。三叠纪－株罗纪期间，其构造－沉积演化经历了大陆初始裂谷（T）、原洋裂谷（J1）、残余弧后盆地（J2－J3）阶段。初始裂谷阶段的拉张是呈南断北超的半地堑式由东向西进行的，逐渐形成地堑式原洋裂谷盆地。中晚侏罗世，南部新特提斯洋壳开始北各俯冲,产生的区域挤压应力使原洋裂谷逐渐封闭，裂谷盆地的小洋壳表现出以南向俯冲为主的双向式腑冲，同时伴生区域热沉降，盆地具残余弧后盆地的性质。该阶段,羌南地区发育碳酸盐岩为主的稳定陆缘沉积，冈度斯－念青唐古拉板片北部则形成广泛南超的近源碎屑沉积。  相似文献   

三峡库区滑坡治理工程设计中推力荷载计算方法初探     

潘伟  赵欣  谭建民 《地质灾害与环境保护》2002,13(4):70-72

随着三峡水利工程的逐步实施，淹没区移民及新城镇建设等人类工程活动的加剧，以滑坡为主的环境地质问题日益突出。本文从稳定系数、安全系数入手，对铁道、公路等部门常用的设计计算原理进行了研究，并由此类比分析研究了三峡区回水后或库水位正常运行条件下，滑坡治理工程设计计算方法。  相似文献