三相泡沫钻井液流变特性研究          下载免费PDF全文

吴飞  冯钢 《探矿工程》1995,(2):39-40

三相泡沫钻进液流变模式可通过灰色关联分析法进行优选，卡森模式是描述该钻井液流变特性的主要模式，该钻井液表观粘度高，工应力较大，剪切稀释特性强，流变参数主要受气比和基浆性能影响。  相似文献   

Long-term changes in the type,but not amount,of ingested plastic particles in short-tailed shearwaters in the southeastern Bering Sea     

Vlietstra LS  Parga JA 《Marine pollution bulletin》2002,44(9):945-955

We report the current (1997-1999, 2001) incidence and amount of ingested plastic in short-tailed shearwaters (Puffinus tenuirostris) in the southeastern Bering Sea and compare our results with plastic reported in shearwaters during 1970-1978. We also examine correlations between plastic loads and shearwater body mass. We found that 84% (N = 330) of shearwaters sampled in 1997-1999 and 2001 contained plastic. The incidence and amount of ingested plastic have not significantly changed since the 1970s. In contrast, the predominant type of plastic has changed over time, from industrial plastic to user plastic. S,asonal patterns in the incidence and amount of ingested plastic also changed from peak levels during early and late summer in the 1970s to mid summer in the late 1990s and 2001. We suggest that the availability of neuston plastic to seabirds in the Bering Sea has undergone a shift in composition since the 1970s. Shearwater body mass appears little if at all impaired by plastic, at least at present levels of consumption.  相似文献   

大豆蛋白废水处理中泡沫分离过程的数学模型     

杨向平  刘元东  席作家  翟绪丽 《中国海洋大学学报(自然科学版)》2008,38(1):111-115

假设吸附过程始终处于平衡态、气泡大小均一以及每一个气泡均为正十二面体,构建了泡沫分离过程的数学模型.模拟了液池中蛋白质在气液界面上的吸附过程和泡沫层中气泡的失水过程,得出了富集比的表达式,可用于分离效果的预测.经验证,模型与实验条件下的泡沫分离过程基本符合.  相似文献   

Plastic debris as nesting material in a Kittiwake-(Rissa tridactyla)-colony at the Jammerbugt, Northwest Denmark     

Hartwig E  Clemens T  Heckroth M 《Marine pollution bulletin》2007,54(5):595-597

This paper continues the investigations of Clemens and Hartwig from 1992 on the proportion of garbage used as nesting material in the Kittiwake colony at Bulbjerg in the Jammerbugt in Northwest Denmark. Whereas in the year 1992 plastic garbage items were included in 39.3% of 466 Kittiwake nests in the Bulbjerg colony, in 2005 57.2% of 311 nests contained plastic debris. Although it has been forbidden to dispose of plastic garbage into the marine environment since the implementation of the MARPOL 73/78-Agreement/Annex V (Regulation for the Prevention of Pollution by Ship Waste) of 1989 and especially since the declaration of the North Sea as a MARPOL-Special Area for garbage in 1991, the pollution of the oceans and the North Sea is still an ubiquitous problem, particularly with regard to plastic waste. Plastic waste is presumably not used preferentially for nest-building, but in the context of available nesting material in the waters surrounding the breeding colony. Therefore the share of garbage parts in nests of certain species of birds is an indicator of the amount of waste in the natural environment in the vicinity of their breeding site.  相似文献   

气动潜孔锤钻进技术若干问题   总被引：11，自引：2，他引：9       下载免费PDF全文

刘家荣  王建华  王文斌  许刘万 《探矿工程》2010,37(5):40-44

气动潜孔锤钻进技术以其钻进效率高、钻孔质量好等一系列优点已被广泛应用,但在日常应用中也存在着诸如钻进效果不尽如人意,所选设备性能和施工条件不匹配、不适应其主要参数,基本操作守则掌握不好等问题。以工程实践为依据,参考有关文献,对气动潜孔锤钻进中的若干技术问题进行了论述,以期促进该技术的推广应用。  相似文献   

田口方法用于地质样品中痕量超痕量金三种分析方法的对比     

陈爱平  孙自军  李振 《岩矿测试》2014,33(1):51-56

目前测定地质样品痕量、超痕量金常用的三种方法是活性炭吸附富集-发射光谱法、泡塑吸附富集-石墨炉原子吸收光谱法、活性炭吸附富集-电感耦合等离子体质谱法,这三种方法的检出限在0.1~0.3ng/g之间,由于矿石矿物的组成非常复杂,因此在有效富集和分离的基础上,采用合适的分析手段,能够对地质样品提供满意的分析结果。为保证试样要求的灵敏度和准确性,分析方法的选择需求应根据具体试样情况和实验室条件而定。根据田口玄一博士在测量工程学中提出的信噪比(S/N)能测量系统抗干扰能力,评价测量系统的稳健性和可靠性这一观点,本文利用田口测量质量控制理论,评价地质样品中痕量、超痕量金常用的上述三种分析测试方法,对这三种分析方法三个金标准物质的测试数据进行分类处理,计算S/N值和相对标准不确定度,通过比较三者的S/N值和相对标准不确定度值,确定更为可靠的测试体系。分析结果表明,对于地质样品中痕量金(含量大于1 ng/g)的测试,三种分析方法均能够满足要求;对于超痕量金(含量小于1 ng/g)的测试,活性炭吸附富集-电感耦合等离子体质谱法是较好的测试方案。  相似文献   

耐高温泡沫钻井液技术研究概况及研究方向探讨   总被引：4，自引：0，他引：4  

董海燕 《地质与勘探》2014,50(5):991-996

耐高温泡沫钻井液是对深井、超深井、高温地热井、干热岩等资源开采,特别是超高温资源的开采有效的钻井液之一。本文在分析耐高温泡沫钻井液面临的主要问题的基础上,对国内外抗高温泡沫处理剂、耐高温泡沫钻井液体系应用情况进行了介绍。深井、超深井、干热岩、地热井等钻探中会面临超高温、低压易漏地层,因此对低密度钻井液体系的要求也越来越高,主要技术难点是高温、低压,窄密度窗口钻井液的性能的控制。结合对耐高温泡沫钻井液主要技术难点的分析以及高温对泡沫钻井液的要求,综合目前耐高温泡沫钻井液技术的发展,由此得出：耐260℃以上抗高温、低密度泡沫钻井液处理剂及体系,耐高温泡沫钻井液测试仪器及评价方法是未来抗高温钻井液发展的方向。  相似文献   

Parameters affect foaming and foam stability during foam drilling     

Hazaea Mohammed  Youhong SUN  Ould El Houssein Yarbana 《世界地质(英文版)》2007,10(2)

The authors presented indoor practice experiments of parameters affect on foaming and foam stability. Experiments were carried out and special equipments were used to determine foaming and foam stability; tests were tabulated and charted. The effects of chemical and physical parameters on foaming and foam stability have been conducted.  相似文献   

成都花卉塑料薄膜大棚热量平衡初探     

黄斌  罗秀陵 《成都信息工程学院学报》1993,(3)

本文在测量的基础上,对热量平衡各分量在大棚内、外的差异,进行了比较与分析,对大棚生产管理有重要参考价值。  相似文献   

板钉连接CFST柱-RC梁节点梁端塑性铰区受力性能数值模拟     

马华  阚吉平  赵玉坤  李振宝 《震灾防御技术》2022,17(2):381-391

建立竖板-栓钉连接钢管混凝土（CFST）柱-钢筋混凝土（RC）梁节点试件（SSJD）拟静力加载试验有限元模型,并在节点损伤情况、梁端荷载-位移曲线等数值模拟结果与试验结果吻合较好的基础上,进一步开展了RC梁混凝土强度、配筋率ρ_s和连接竖板长度L_b及界面连接情况等对CFST柱-RC梁节点梁端塑性铰区域力学性能的影响。研究结果表明,RC梁混凝土强度对试件SSJD塑性铰区域受力性能的影响较小;适筋范围内RC梁配筋率增加可适当提高试件SSJD承载力和延性;随着连接竖板长度的增加,梁端塑性铰区域外移,梁破坏荷载增大;本研究给出的RC梁与CFST柱之间的界面抗剪承载力模拟值与计算值吻合较好,可用于界面抗剪设计。  相似文献